Subversion Repositories livecd

#!/bin/bash
#
###############################################################
#
# Installes the LiveCD on local hard disk
# 
# Boot LiveCD and run this script as root
#
# Urs Beyerle
# Brent L. Bates
#
###############################################################


###############################################################
# Definitions
###############################################################

# set PATH
PATH="/usr/bin:/usr/sbin:/bin:/sbin:/usr/X11R6/bin"

# RPMs that are no longer needed and may break future udpates
RPMS_TO_REMOVE="kernel-module-squashfs \
                kernel-module-unionfs \
                kernel-module-aufs \
                unionfs-.* \
                aufs-.* \
                squashfs-.*"

# RPMs that can break future Scientific Linux updates
# because there are not part of Scientific Linux
RPMS_TO_REMOVE_SL=""
                   
# RPMs that can break future PSI SL updates
# because there are not part of PSI Scientific Linux
RPMS_TO_REMOVE_PSI=""
                   
# files which should be restored from .ori files
FILES_RESTORE="/etc/init.d/netfs \
           /etc/init.d/autofs \
           /etc/init.d/halt \
           /etc/init.d/network
           /etc/init.d/functions \
           /etc/rc.d/rc.sysinit \
           /etc/sysconfig/afs \
           /etc/motd \
           /etc/redhat-release \
           /etc/rc.d/rc.local"

# LiveCD init scripts will be removed
LIVECD_INIT_SCRIPTS="runfirst \
                    runveryfirst \
                    runlast \
                    kudzu-auto \
                    login"

# Main directories which should be not be copied
DIR_NOT_COPY="/proc \
              /dev \
              /livecd \
              /boot \
              /afs \
              /sys \
              /media \
              /misc \
              /mnt \
              /net \
              /initrd"

# Mount point of the new SL system
NEW=/mnt/harddisk

# Name of the script
SCRIPTNAME=$( basename $0 )

# dir of mounted /$MOUNTDIR/live
MOUNTDIR=livecd

# Default File System Type
FS_TYPE=ext3


###############################################################
# Functions
###############################################################

function usage() {

   ## Usage
   # ----------------------------------------------------------

   cat <<EOF
   
  $SCRIPTNAME [OPTIONS] -mbr=[DEVICE] [PARTITION | MOUNTED FILE SYSTEM]

    Installes LiveCD on PARTITION and the bootloader grub into 
    the Master Boot Record (MBR) of DEVICE. The MBR will be 
    backed up to PARTITION.

  OPTIONS:

    -h   --help          : Print this screen
    -swap=[partition(s)] : Use [partition(s)] as swap ("," or "|" separated)
    -win=[partition]     : Your active Windows partition. If not given, 
                           $SCRIPTNAME tries to find it
    -nogrub              : Do not install grub. You have to install 
                           manually a bootloader (not recommended)
    -floppy              : Needed, if grub should be installed on floppy
                           In this case use -mbr=/dev/fd0 -floppy
    -norpmremove         : Do not remove RPMs that can break future 
                           updates (not recommended)
    -fstype              : File system type (ext3,xfs,etc.), default is $FS_TYPE
    -y                   : Answer all questions with yes
    -f                   : force formating 

  Example:

  $SCRIPTNAME -swap=/dev/sda3 -mbr=/dev/sda /dev/sda2

    Will install LiveCD on /dev/sda2 (= second partition on 
    first SATA disk). All data on /dev/sda2 will be deleted.
    /dev/sda3 has to be a Linux Swap partion. GRUB will be 
    installed in the MBR of /dev/sda (= first SATA disk).
   
  Remarks:

    To display your hard disk partitions, user 'fdisk -l'.
    Use fdisk, qtparted or parted to create an empty Linux
    partition.

EOF
}


function exit_now() {

    local exitcode=$1
    umount $INSTALL_PART 2>/dev/null
    exit $exitcode
}



###############################################################
# Main
###############################################################

### are we root?
### -----------------------------------------------------------
if [ "$( whoami )" != "root" ]; then
    echo; echo "Please run this script as root: 'su - -c $SCRIPTNAME'"; echo
    exit_now 1
fi


### read options from command-line
### -----------------------------------------------------------
while [ $# -gt 0 ]; do

    case "$1" in
       -h)
            usage; exit_now;;

       --help)
            usage; exit_now;;

       -swap*)
           if echo $1 | grep -q '=' ; then
               SWAP_PART=$( echo $1 | sed 's/^-swap=//' )
           else
               shift
               SWAP_PART=$1
           fi
           ;;

       -mbr*)
           if echo $1 | grep -q '=' ; then
               MBR_DEV=$( echo $1 | sed 's/^-mbr=//' )
           else
               shift
               MBR_DEV=$1
           fi
           MBR_DEV=$( echo "$MBR_DEV" | sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )
           ;;

       -win*)
           if echo $1 | grep -q '=' ; then
               WIN_PART=$( echo $1 | sed 's/^-win=//' )
           else
               shift
               WIN_PART=$1
           fi
           ;;

       -nogrub)
            NOGRUB=$1;;

       -norpmremove)
            NORPMREMOVE=$1;;

       -floppy)
            FLOPPY=$1;;

       -fstype)
            $FS_TYPE=$1;;

       -f)
            $FORCE=$1;;

       -y)
            YES=$1;;

       *)
            INSTALL_PART=$1;;
    esac

    shift

done
echo


### display fdisk -l
### -----------------------------------------------------------
echo "Output of 'fdisk -l' ..."
fdisk -l 2>/dev/null
echo


### test if $INSTALL_PART is defined
### -----------------------------------------------------------
if [ ! $INSTALL_PART ]; then
    echo "No partition defined for installation."
    echo "Please see '$SCRIPTNAME -h'."; echo
    exit_now 1
fi


### test if MBR_DEV is given
### -----------------------------------------------------------
if [ ! $NOGRUB ]; then
    if [ ! $MBR_DEV ]; then
        echo "No MBR device defined."
        echo "Please see '$SCRIPTNAME -h'."
        echo
        exit_now 1
    fi
fi


### test if $INSTALL_PART is mounted
### -----------------------------------------------------------
df -T -l | sed -e 's/  */ /g' | grep -q "${INSTALL_PART}"

if [ "$?" = "0" ]; then
   ### This is a mounted partition
   ### -----------------------------------------------------------
   MOUNTED=1

   df -T -l | sed -e 's/  */ /g' | cut -d" " -f7 | grep -q "^${INSTALL_PART}$"
   if [ "$?" = "0" ]; then

      ### Was given the mount point
      ### -----------------------------------------------------------
      NEW=${INSTALL_PART}
      INSTALL_PART=`df -T -l | grep "${INSTALL_PART}$" | cut -d" " -f1`
   else

      ### Was given the mount partition
      ### -----------------------------------------------------------
      NEW=`df -T -l | grep "^${INSTALL_PART}" | sed -e 's/  */ /g' | cut -d" " -f7`
   fi
   FS_TYPE=`df -T -l | sed -e 's/  */ /g' | grep "^${INSTALL_PART}" | cut -d" " -f2`

   ### Get boot defice information
   ###    Check for separate mounted boot partition
   ### -----------------------------------------------------------
   INSTALL_DEV=`df -T -l | sed -e 's/  */ /g' | grep "boot$" | cut -d" " -f1`
   if [ "$?" = "0" ]; then
      ###    Separate boot partition
      ### -----------------------------------------------------------
      INSTALL_BOOT_DIR=""
   else
      ###    Install and boot all one partition
      ### -----------------------------------------------------------
      INSTALL_DEV=${INSTALL_PART}
      INSTALL_BOOT_DIR="/boot"
   fi

   ### Is the boot device a RAID device
   ### -----------------------------------------------------------
   mdadm -D $INSTALL_DEV 2>/dev/null | grep -q -i Version
   if [ "$?" = "0" ]; then
      ### Boot device is RAID
      ### -----------------------------------------------------------
      BOOT_DRIVE=`mdadm -D $INSTALL_DEV | grep -v ':$' | grep "/dev/" | sed -e 's/  */ /g' | cut -d" " -f8 |head -1`
      INSTALL_PART_NR=$( echo "$BOOT_DRIVE" | sed -e 's%.*/[sh]d[a-z]\([0-9]*\)$%\1%' )
      BOOT_DRIVE=$( echo "$BOOT_DRIVE" | sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )
   else
      ### Boot device not RAID
      ### -----------------------------------------------------------
      INSTALL_PART_NR=$( echo "$INSTALL_DEV" | sed -e 's%.*/[sh]d[a-z]\([0-9]*\)$%\1%' )
      INSTALL_DEV=$( echo "$INSTALL_DEV" | sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )
      BOOT_DRIVE=$INSTALL_DEV
   fi
else
   ### Partition is NOT mounted
   ### -----------------------------------------------------------
   MOUNTED=0

   ### test if $INSTALL_PART exists
   ### -----------------------------------------------------------
   fdisk -l 2>/dev/null | cut -d" " -f1 | grep -q "^${INSTALL_PART}$"
   if [ "$?" != "0" ]; then
       echo "Partition $INSTALL_PART not found! See 'fdisk -l'."
       echo "Or you have to reboot first to make the partition table active." 
       echo
       exit_now 1
   fi


   ### test if $INSTALL_PART is a Linux partition
   ### -----------------------------------------------------------
   fdisk -l 2>/dev/null | grep "Linux$" | cut -d" " -f1 | grep -q "^${INSTALL_PART}$"
   if [ "$?" != "0" ]; then
       echo "Partition $INSTALL_PART is not a Linux partition! (see 'fdisk -l')."
       echo "Use fdisk and/or qtparted to create a Linux partition!"
       echo "You have to reboot first to make the partition table active."
       echo
       exit_now 1
   fi

   ### set $INSTALL_DEV (eg. /dev/sda)
   ### -----------------------------------------------------------
   INSTALL_DEV=$( echo "$INSTALL_PART" | sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )
   BOOT_DRIVE=$INSTALL_DEV
   INSTALL_PART_NR=$( echo "$INSTALL_PART" | sed -e 's%.*/[sh]d[a-z]\([0-9]*\)$%\1%' )
   INSTALL_BOOT_DIR="/boot"
fi


### test if $SWAP_PART exists and is a Linux Swap partition
### -----------------------------------------------------------
if [ "$SWAP_PART" ]; then
    SWAP_PART=`echo ${SWAP_PART} |tr '[,|]' ' '`
    for SWAP_PARTITION in $SWAP_PART ; do
       fdisk -l 2>/dev/null | cut -d" " -f1 | grep -q "^${SWAP_PARTITION}$"
       if [ "$?" != "0" ]; then
           echo "Swap partition $SWAP_PARTITION not found! (see 'fdisk -l')."
           echo "Or you have to reboot first to make the partition table active."
           echo
           exit_now 1
       fi
       fdisk -l 2>/dev/null | grep "Linux swap" | cut -d" " -f1 | grep -q "^${SWAP_PARTITION}$"
       if [ "$?" != "0" ]; then
           echo "Partition(s) $SWAP_PARTITION is/are not a Linux swap partition! (see 'fdisk -l')."
           echo "Use fdisk and/or qtparted to create a Linux Swap partition !"
           echo "You have to reboot first to make the partition table active."
           echo
           exit_now 1
       fi
    done
fi


### print warning
### -----------------------------------------------------------
echo                     "------------------------------------------------------------"
echo                     "   LiveCD will be installed on partition $INSTALL_PART"
[ "$SWAP_PART" ] && echo " Partition(s) $SWAP_PART will be used as swap partition(s)."
[ ! $NOGRUB ]    && echo " GRUB will be installed in Master Boot Record of $MBR_DEV"
echo                     "       !! All data on $INSTALL_PART will be lost !!"
echo                     "------------------------------------------------------------"
echo


### continue?
### -----------------------------------------------------------
if [ ! $YES ]; then
    echo -n "Continue (y/N)? "
    read key
    echo
    [ "$key" != "y" ] && exit_now 0
fi


### format $SWAP_PART (don't format swap, if already formated)
### -----------------------------------------------------------
if [ "$SWAP_PART" ]; then
    echo "Make swap on $SWAP_PART ..."
    swapoff -a >/dev/null 2>&1
    swapon -p 1 $SWAP_PART 2>/dev/null
    if [ "$?" != "0" ]; then
        for SWAP_PARTITION in $SWAP_PART; do
           echo "Format $SWAP_PARTITION as swap." 
           mkswap $SWAP_PARTITION
        done
    fi
    echo
fi


if [ $MOUNTED = "0" ]; then
    ### format $INSTALL_PART
    ### -----------------------------------------------------------

    # define force option for mkfs command
    if [ "$FORCE" ] && [ "$FS_TYPE" = "ext3" ];     then  FORCE="-F"; fi
    if [ "$FORCE" ] && [ "$FS_TYPE" = "ext2" ];     then  FORCE="-F"; fi
    if [ "$FORCE" ] && [ "$FS_TYPE" = "xfs" ];      then  FORCE="-f"; fi
    if [ "$FORCE" ] && [ "$FS_TYPE" = "reiserfs" ]; then  FORCE=""; fi
    
    echo -n "Format $INSTALL_PART, please wait ... " 
    mkfs.$FS_TYPE $FORCE -q $INSTALL_PART || exit_now 1
    echo "done."; echo

    ### mount $INSTALL_PART
    ### -----------------------------------------------------------
    echo -n "Try to mount $INSTALL_PART to $NEW ... "
    mkdir -p $NEW
    mount $INSTALL_PART $NEW || exit_now 1
    echo "done."; echo
fi


### copy root dirs
### -----------------------------------------------------------
echo "Copy Live System to $INSTALL_PART ..."
root_dirs=$( ls / )
for dir in $root_dirs; do
    # check if dir is not in $DIR_NOT_COPY
    do_not_copy=""
    for not_dir in $DIR_NOT_COPY; do
        if [ "$not_dir" = "/$dir" ]; then 
            do_not_copy="yes"
            break
        fi
    done
    # do not copy links
    [ -L /$dir ] && do_not_copy="yes"

    fail=""
    if [ ! $do_not_copy ]; then
        echo -n "  * Copy  /$dir ... "
        cp -a -f /$dir $NEW || fail=true
        echo "done."
    fi
    fail=""
done
echo
if [ $fail ]; then
    echo "ERROR: Not everything was copied to $INSTALL_PART"
    exit_now 1
fi


### move /usr/opt back to /opt
### -----------------------------------------------------------
if [ -d $NEW/usr/opt ]; then
    echo -n "Move /opt back ... "
    mv $NEW/usr/opt $NEW/
    echo "done."; echo
fi


### create dirs which were not copied
### -----------------------------------------------------------
for dir in $DIR_NOT_COPY; do
   if [ ! -d $NEW$dir ]; then
       mkdir $NEW$dir
   fi
done
# we do not need this directory
rmdir $NEW/livecd
# if not yet existing, create
mkdir -p $NEW/srv
mkdir -p $NEW/selinux


### copy back original files
### -----------------------------------------------------------
echo -n "Restore original files ... " 
for file in $FILES_RESTORE; do
    [ -r $NEW${file}.ori ] && mv -f $NEW${file}.ori $NEW${file} 
done
echo "done."; echo


### define kernel version
### -----------------------------------------------------------
rpm --quiet -q kernel     && UP_installed=true
rpm --quiet -q kernel-smp && SMP_installed=true
[ $UP_installed ]  && KERNEL_VERSION=$( rpm -q --qf "%{V}-%{R}" kernel 2>/dev/null )
[ $SMP_installed ] && KERNEL_VERSION=$( rpm -q --qf "%{V}-%{R}" kernel-smp  2>/dev/null )
if [ ! $KERNEL_VERSION ]; then
    echo "ERROR: Kernel version could not be determined - installation failed"; echo
    exit_now 1
fi    



if [ ! $NOGRUB ]; then

    ### Backup Master Boot Record MBR
    ### -----------------------------------------------------------
    # do we have already a backup?
    MBR_FILENAME="MBR$( echo $MBR_DEV | tr / _ ).bak"
    if [ ! -e /tmp/$MBR_FILENAME ]; then
        echo "Backup Master Boot Record (MBR) of $MBR_DEV ..."
        dd if=$MBR_DEV of=/tmp/$MBR_FILENAME bs=512 count=1
    fi
    cp -a /tmp/$MBR_FILENAME $NEW/$MBR_FILENAME
    echo "MBR saved as $MBR_FILENAME on $INSTALL_PART and on /tmp"
    echo


    ### install grub
    ### -----------------------------------------------------------
    echo "Run grub-install ... "
    mkdir -p $NEW/boot/grub
    if [ $FLOPPY ]; then
        grub-install --root-directory=$NEW $MBR_DEV 2>/dev/null || GRUB_FAILED="yes"
    else
        grub-install --no-floppy --root-directory=$NEW $MBR_DEV 2>/dev/null || GRUB_FAILED="yes"
    fi
    echo "done."; echo


    ### check for device.map file 
    ### -----------------------------------------------------------
    DEVICE_MAP=$NEW/boot/grub/device.map
    if [ ! -e $NEW/boot/grub/device.map ]; then
        echo "ERROR: $NEW/boot/grub/device.map not found"
        exit_now 1
    fi


    ### convert dev syntax to grub syntax
    ### -----------------------------------------------------------
    GRUB_INSTALL_DEV=$( grep $BOOT_DRIVE $DEVICE_MAP | awk '{ print $1 }' )
    GRUB_ROOT_PART=$( echo "$GRUB_INSTALL_DEV" | sed "s%)$%,`expr $INSTALL_PART_NR - 1`)%" )


    ### find active Windows partition
    ### -----------------------------------------------------------
    if [ ! $WIN_PART ]; then
        # try to find active Windows partition
        WIN_PART=$( fdisk -l 2>/dev/null | awk '{ if ($2 == "*" && $7 ~ "NTFS") print $1 }' | head -1 )
    fi

    if [ $WIN_PART ]; then
        WIN_installed=true
        WIN_DISK=$( echo "$WIN_PART" | sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )
        WIN_PART_NR=$( echo "$WIN_PART" | sed -e 's%.*/[sh]d[a-z]\([0-9]*\)$%\1%' )
        # convert dev syntax to grub syntax
        GRUB_WIN_DEV=$( grep $WIN_DISK $DEVICE_MAP | awk '{ print $1 }' )
        GRUB_WIN_PART=$( echo "$GRUB_WIN_DEV" | sed "s%)$%,`expr $WIN_PART_NR - 1`)%" )

        # $GRUB_WIN_PART should be something like (hd0,0)
        echo "Found active Windows partition ( $WIN_PART = $GRUB_WIN_PART )" 
        echo "Will add entry for Windows in GRUB."
        echo
    fi


    ### create grub.conf file
    ### -----------------------------------------------------------
    echo "Create grub.conf ..."

    TITLE="Linux"
    [ -e $NEW/etc/redhat-release ] && TITLE=$( cat $NEW/etc/redhat-release )

    DEFAULT=0
    # set default=1, if smp kernel is running
    uname -r | grep -q smp
    [ "$?" = "0" ] && DEFAULT=1

    cat > $NEW/boot/grub/grub.conf <<EOF
# grub.conf generated by $SCRIPTNAME
default=$DEFAULT
timeout=10
splashimage=${GRUB_ROOT_PART}${INSTALL_BOOT_DIR}/grub/splash.xpm.gz
#hiddenmenu
EOF

    if [ $UP_installed ]; then
        echo "Add entry for UP kernel into grub.conf"
        cat >> $NEW/boot/grub/grub.conf <<EOF
title $TITLE (${KERNEL_VERSION})
        root $GRUB_ROOT_PART
        kernel ${INSTALL_BOOT_DIR}/vmlinuz-$KERNEL_VERSION ro root=$INSTALL_PART
        initrd ${INSTALL_BOOT_DIR}/initrd-$KERNEL_VERSION.img
EOF
    fi

    if [ $SMP_installed ]; then
        echo "Add entry for SMP kernel into grub.conf"
        cat >> $NEW/boot/grub/grub.conf <<EOF
title $TITLE (${KERNEL_VERSION}smp)
        root $GRUB_ROOT_PART
        kernel ${INSTALL_BOOT_DIR}/vmlinuz-${KERNEL_VERSION}smp ro root=$INSTALL_PART
        initrd ${INSTALL_BOOT_DIR}/initrd-${KERNEL_VERSION}smp.img
EOF
    fi

    if [ $WIN_installed ]; then
        echo "Add entry for Windows into grub.conf"
        cat >> $NEW/boot/grub/grub.conf <<EOF
title Windows
        rootnoverify $GRUB_WIN_PART
        chainloader +1
EOF
    fi

    chmod 600 $NEW/boot/grub/grub.conf
    ln -s ../boot/grub/grub.conf $NEW/etc/grub.conf
    ln -s ./grub.conf $NEW/boot/grub/menu.lst
    echo "done."; echo


    ### create /etc/sysconfig/grub file
    ### -----------------------------------------------------------
    cat > $NEW/etc/sysconfig/grub <<EOF    
boot=$INSTALL_DEV
forcelba=0
EOF


fi


### install kernel and other files into /boot
### -----------------------------------------------------------
echo "Install kernel(s) ..."

[ -e /boot/vmlinuz ]      && BOOT_DIR=/boot
[ -e /boot/boot/vmlinuz ] && BOOT_DIR=/boot/boot

if [ ! $BOOT_DIR ]; then
    echo "ERROR: No kernel found - installation failed"; echo
    exit_now 1
fi

cp -a $BOOT_DIR/vmlinuz            $NEW/boot/vmlinuz-${KERNEL_VERSION}
cp -a $BOOT_DIR/vmlinuzs           $NEW/boot/vmlinuz-${KERNEL_VERSION}smp  2>/dev/null
cp -a $BOOT_DIR/System.map-*       $NEW/boot/
cp -a $BOOT_DIR/config-*           $NEW/boot/
cp -a $BOOT_DIR/symvers-*.gz       $NEW/boot/        2>/dev/null
cp -a $BOOT_DIR/grub/splash.xpm.gz $NEW/boot/grub/   2>/dev/null
cp -a $BOOT_DIR/message.ja         $NEW/boot/        2>/dev/null
cp -a $BOOT_DIR/message            $NEW/boot/        2>/dev/null

echo "done."; echo


### create /etc/sysconfig/kernel file
### -----------------------------------------------------------
cat > $NEW/etc/sysconfig/kernel <<EOF    
# UPDATEDEFAULT specifies if new-kernel-pkg should make
# new kernels the default
UPDATEDEFAULT=yes

# DEFAULTKERNEL specifies the default kernel package type
DEFAULTKERNEL=kernel
EOF


### create /etc/fstab
### -----------------------------------------------------------
cat > $NEW/etc/fstab <<EOF
$INSTALL_PART   /               $FS_TYPE                defaults        1 1
EOF

if [ -z "$INSTALL_BOOT_DIR" ]; then
   echo "$INSTALL_DEV   /boot           $FS_TYPE                defaults        1 2" >> $NEW/etc/fstab
fi

cat >> $NEW/etc/fstab <<EOF
devpts          /dev/pts        devpts          gid=5,mode=620  0 0
tmpfs           /dev/shm        tmpfs           defaults        0 0
proc            /proc           proc            defaults        0 0
sysfs           /sys            sysfs           defaults        0 0
EOF

if [ "$SWAP_PART" ]; then
    for SWAP_PARTITION in $SWAP_PART ; do
        echo "$SWAP_PARTITION   swap            swap            defaults,pri=1  0 0" >> $NEW/etc/fstab
    done
fi


### make initrd 
### (needs $NEW/etc/fstab to find correct modules for root filesystem !!)
### -----------------------------------------------------------
echo "Create initrd(s) ..."
# initrd should not be build on tmpfs (we take $NEW/tmp instead of /tmp)
sed -i "s|^TMPDIR=.*|TMPDIR=\"$NEW/tmp\"|" /usr/sbin/livecd-mkinitrd
 
if [ $UP_installed ]; then
    depmod -a ${KERNEL_VERSION}
    /usr/sbin/livecd-mkinitrd --fstab=$NEW/etc/fstab \
                    $NEW/boot/initrd-${KERNEL_VERSION}.img ${KERNEL_VERSION}
    if [ ! -e $NEW/boot/initrd-${KERNEL_VERSION}.img ]; then
        echo "ERROR: Failed to create $NEW/boot/initrd-${KERNEL_VERSION}.img"
        exit_now 1
    fi
fi
if [ $SMP_installed ]; then
    depmod -a ${KERNEL_VERSION}smp
    /usr/sbin/livecd-mkinitrd --fstab=$NEW/etc/fstab \
                    $NEW/boot/initrd-${KERNEL_VERSION}smp.img ${KERNEL_VERSION}smp
    if [ ! -e $NEW/boot/initrd-${KERNEL_VERSION}smp.img ]; then
        echo "ERROR: Failed to create $NEW/boot/initrd-${KERNEL_VERSION}smp.img"
        exit_now 1
    fi
fi
echo "done."; echo


### remove LiveCD init.d scripts
### -----------------------------------------------------------
for file in $LIVECD_INIT_SCRIPTS; do
    rm -f $NEW/etc/rc.d/init.d/$file
    for n in 0 1 2 3 4 5 6; do
        rm -f $NEW/etc/rc.d/rc${n}.d/*$file
    done
done


### restore cronjobs
### -----------------------------------------------------------
mv $NEW/etc/cron_backup/sysstat       $NEW/etc/cron.d/ 2>/dev/null
mv $NEW/etc/cron_backup/cfengine      $NEW/etc/cron.d/ 2>/dev/null
mv $NEW/etc/cron_backup/psi-cronjobs  $NEW/etc/cron.d/ 2>/dev/null
mv $NEW/etc/cron_backup/00-makewhatis.cron.weekly $NEW/etc/cron.weekly/00-makewhatis.cron 2>/dev/null
mv $NEW/etc/cron_backup/*             $NEW/etc/cron.daily/ 2>/dev/null


### prepare chroot to $NEW
### -----------------------------------------------------------
mount --bind /dev $NEW/dev
mount --bind /sys $NEW/sys
mount -t proc proc $NEW/proc


### turn on kudzu again
### -----------------------------------------------------------
chroot $NEW chkconfig kudzu on


### turn on check_update again (only at PSI)
### -----------------------------------------------------------
chroot $NEW chkconfig check_update on 2>/dev/null


### fix some services which were disabled 
### because of diskless NFS client
### -----------------------------------------------------------
if [ -e /$MOUNTDIR/service.on ]; then
    cat /$MOUNTDIR/service.on | while read $serv; do
        chroot $NEW chkconfig $serv on
    done
fi


### remove some files
### -----------------------------------------------------------
rm -rf $NEW/usr/share/applications/livecd-install-gui.desktop
rm -rf $NEW/usr/share/applications/save-localdata.desktop


### remove RPMs that can break future updates  
### -----------------------------------------------------------
if [ ! $NORPMREMOVE ]; then
    echo "Remove RPMs that may break future updates ..."
    chroot $NEW rpm -qa 2>/dev/null > /tmp/rpmlist

    # Scientific Linux RPMs
    RPMSTOREMOVE="$RPMS_TO_REMOVE $RPMS_TO_REMOVE_SL"

    # PSI Scientific Linux RPMs
    if [ -e /etc/sysconfig/psi ]; then
        RPMSTOREMOVE="$RPMS_TO_REMOVE $RPMS_TO_REMOVE_PSI"
    fi

    for rpm in $RPMSTOREMOVE; do
        rpms_remove=$( cat /tmp/rpmlist | grep "^$rpm" )
        for rpm_remove in $rpms_remove; do        
            chroot $NEW rpm -e --nodeps $rpm_remove >/dev/null 2>&1
            [ "$?" = "0" ] && echo " removing $rpm_remove"
        done
    done
    echo "done."; echo
fi


### disable nvidia driver 
### -----------------------------------------------------------
# not in case of a PSI installation
if [ ! -e /etc/sysconfig/psi ]; then
    if [ -e $NEW/etc/X11/xorg.conf.nv_SAVED ]; then
        echo "Remove nvidia driver and correct xorg.conf ..."
        # correct xorg.conf
        sed -i "s/#nv_SAVED //" $NEW/etc/X11/xorg.conf
        sed -i "/.*Driver.*nvidia.*/d" $NEW/etc/X11/xorg.conf
        # disable nvidia libs (if not yet done by rpm -e)
        LIB=lib
        [ $( arch ) = "x86_64" ] && LIB=lib64
        mv -f $NEW/usr/X11R6/$LIB/modules/extensions/xxx.libGLcore.a.saved_by_nvidia \
              $NEW/usr/X11R6/$LIB/modules/extensions/libGLcore.a 2>/dev/null
        mv -f $NEW/usr/X11R6/$LIB/modules/extensions/xxx.libglx.a.saved_by_nvidia \
              $NEW/usr/X11R6/$LIB/modules/extensions/libglx.a 2>/dev/null
        rm -f $NEW/usr/X11R6/$LIB/modules/extensions/libglx.so
        rm -f $NEW/usr/X11R6/$LIB/libGL.so*
        rm -f $NEW/usr/$LIB/libGLcore.so
        echo "done."; echo
    fi
fi


### install grub for the 2. time, if it failed before 
### (happens on xfs filesystem)
### -----------------------------------------------------------
if [ ! $NOGRUB ] && [ $GRUB_FAILED ]; then

    echo "Run grub-install for the 2. time ... "
    mkdir -p $NEW/boot/grub
    if [ $FLOPPY ]; then
        grub-install --root-directory=$NEW $MBR_DEV
    else
        grub-install --no-floppy --root-directory=$NEW $MBR_DEV
    fi
    echo "done."; echo

fi

### umount $INSTALL_PART
### -----------------------------------------------------------
umount $NEW/dev
umount $NEW/sys
umount $NEW/proc
UMOUNT_LIST=`df -l | grep "$NEW" | sed -e 's/  */ /g' | cut -d" " -f6 | sort -r`
umount $UMOUNT_LIST


### print summary
### -----------------------------------------------------------
echo                     "--------------------------------------------------------------"
echo                     "  LiveCD installed on partition $INSTALL_PART"
[ "$SWAP_PART" ] && echo "  Partition(s) $SWAP_PART will be used as swap partition(s)"
echo
[ ! $NOGRUB ]    && echo "  GRUB installed in Master Boot Record (MBR) of $MBR_DEV"
[ ! $NOGRUB ]    && echo "  MBR saved as $MBR_FILENAME on $INSTALL_PART and in /tmp"
[ ! $NOGRUB ]    && echo "  If you have to restore MBR, execute under Linux:"
[ ! $NOGRUB ]    && echo "  # dd if=$MBR_FILENAME of=$MBR_DEV bs=512 count=1"
echo 
[ $WIN_PART ]    && echo "  Entry created in grub.conf for Windows partition $WIN_PART"
echo                     "--------------------------------------------------------------"
echo                     "End of $SCRIPTNAME"
echo