Subversion Repositories livecd

#!/bin/bash

#
# livecd-mkinitrd:
#
#  mkinitrd used by livecd-install script
#  - based on mkinitrd from RHEL4
#  - TMPDIR=/tmp
#  - comment out test of TMPDIR
#
# Urs Beyerle
#


# mkinitrd
#
# Copyright 2005,2006 Red Hat, Inc.
#
# Written by Erik Troan <ewt@redhat.com>
#
# Contributors:
#       Elliot Lee <sopwith@cuc.edu>
#       Miguel de Icaza <miguel@nuclecu.unam.mx>
#       Christian 'Dr. Disk' Hechelmann <drdisk@ds9.au.s.shuttle.de>
#       Michael K. Johnson <johnsonm@redhat.com>
#       Pierre Habraken <Pierre.Habraken@ujf-grenoble.fr>
#       Jakub Jelinek <jakub@redhat.com>
#       Carlo Arenas Belon (carenas@chasqui.lared.net.pe>
#       Keith Owens <kaos@ocs.com.au>
#       Bernhard Rosenkraenzer <bero@redhat.com>
#       Matt Wilson <msw@redhat.com>
#       Trond Eivind Glomsrød <teg@redhat.com>
#       Jeremy Katz <katzj@redhat.com>
#       Preston Brown <pbrown@redhat.com>
#       Bill Nottingham <notting@redhat.com>
#       Guillaume Cottenceau <gc@mandrakesoft.com>
#       Peter Jones <pjones@redht.com>


PATH=/sbin:/usr/sbin:/bin:/usr/bin:$PATH
export PATH

VERSION=4.2.1.8

compress=1
allowmissing=""
target=""
kernel=""
force=""
verbose=""
MODULES=""
img_vers=""
builtins=""
pivot=1
initramfs=""
modulefile=/etc/modules.conf
rc=0

IMAGESIZE=8000
PRESCSIMODS="scsi_mod sd_mod unknown"
fstab="/etc/fstab"

if [ -f /etc/udev/udev.conf ]; then
    USE_UDEV="yes"
    UDEV_TMPFS="yes"
    UDEV_KEEP_DEV="yes"
    . /etc/udev/udev.conf
    [ -x /sbin/udev.static ] || USE_UDEV=
fi

usage () {
    echo "usage: `basename $0` [--version] [-v] [-f] [--preload <module>]" >&2
    echo "       [--omit-scsi-modules] [--omit-raid-modules] [--omit-lvm-modules]" >&2
    echo "       [--with=<module>] [--image-version] [--fstab=<fstab>] [--nocompress]" >&2
    echo "       [--builtin=<module>] [--nopivot] <initrd-image> <kernel-version>" >&2
    echo "" >&2
    echo "       (ex: `basename $0` /boot/initrd-2.2.5-15.img 2.2.5-15)" >&2
    exit 1
}

moduledep() {
    if [ ! -f "/lib/modules/$kernel/modules.dep" ]; then
        echo "No dep file found for kernel $kernel" >&2
        exit 1
    fi

    [ -n "$verbose" ] && echo -n "Looking for deps of module $1"
    deps=$(awk 'BEGIN { searched=ARGV[2]; ARGV[2]=""; rc=1 } \
                function modname(filename) { match(filename, /\/([^\/]+)\.k?o:?$/, ret); return ret[1] } \
                function show() { if (orig == searched) { print dep; orig=""; rc=0; exit } } \
                /^\/lib/ { show(); \
                           orig=modname($1); dep=""; \
                           if ($2) { for (i = 2; i <= NF; i++) { dep=sprintf("%s %s", dep, modname($i)); } } } \
                /^      / { dep=sprintf("%s %s", dep, modname($1));  } \
                END      { show(); exit(rc) }' /lib/modules/$kernel/modules.dep $1)
    [ -n "$verbose" ] && echo -e "\t$deps"
}

findmodule() {
    skiperrors=""

    if [ $1 == "--skiperrors" ]; then
        skiperrors=--skiperrors
        shift
    fi

    local modName=$1

    if [ "$modName" = "off" -o "$modName" = "null" ]; then
        return
    fi

    if [ $(echo $modName | cut -b1) = "-" ]; then
        skiperrors=--skiperrors
        modName=$(echo $modName | cut -b2-)
    fi

    if echo $builtins | egrep -q '(^| )'$modName'( |$)' ; then
        [ -n "$verbose" ] && echo "module $modName assumed to be built in"
        set +x
        return
    fi

    # special cases
    if [ "$modName" = "i2o_block" ]; then
        findmodule i2o_core
        findmodule -i2o_pci
        modName="i2o_block"
    elif [ "$modName" = "ppa" ]; then
        findmodule parport
        findmodule parport_pc
        modName="ppa"
    elif [ "$modName" = "sbp2" ]; then
        findmodule ieee1394
        findmodule ohci1394
        modName="sbp2"
    else
        moduledep $modName
        for i in $deps; do
            findmodule $i
        done
    fi

    for modExt in o.gz o ko ; do
        if [ -d /lib/modules/$kernel/updates ]; then
            fmPath=`(cd /lib/modules/$kernel/updates; echo find . -name $modName.$modExt -type f | /sbin/nash --quiet) | /bin/awk {'print $1; exit;'}`
        fi
        
        if [ -f /lib/modules/$kernel/updates/$fmPath ]; then
            fmPath=updates/$fmPath
            break
        fi

        fmPath=`(cd /lib/modules/$kernel; echo find . -name $modName.$modExt -type f | /sbin/nash --quiet) | /bin/awk {'print $1; exit;'}`
        if [ -f /lib/modules/$kernel/$fmPath ]; then
            break
        fi
    done

    if [ ! -f /lib/modules/$kernel/$fmPath ]; then
        if [ -n "$skiperrors" ]; then
            return
        fi

        # ignore the absence of the scsi modules
        for n in $PRESCSIMODS; do
            if [ "$n" = "$modName" ]; then
                return;
            fi
        done;

        if [ -n "$allowmissing" ]; then
            echo "WARNING: No module $modName found for kernel $kernel, continuing anyway" >&2
            return
        fi
    
        echo "No module $modName found for kernel $kernel, aborting." >&2
        exit 1
    fi

    # only need to add each module once
    if ! echo $MODULES | grep -q "$fmPath" 2>/dev/null ; then
        MODULES="$MODULES $fmPath"
    fi
}

inst() {
    if [ "$#" != "2" ];then
        echo "usage: inst <file> <destination>"
        return
    fi 
    [ -n "$verbose" ] && echo "$1 -> $2"
    cp $1 $2
}

while [ $# -gt 0 ]; do
    case $1 in
        --fstab*)
            if echo $1 | grep -q '=' ; then
                fstab=`echo $1 | sed 's/^--fstab=//'`
            else
                fstab=$2
                shift
            fi              
            ;;

        --with-usb)
            withusb=yes
            ;;

        --with*)
            if echo $1 | grep -q '=' ; then
                modname=`echo $1 | sed 's/^--with=//'`
            else
                modname=$2
                shift
            fi              

            basicmodules="$basicmodules $modname"
            ;;

        --builtin*)
            if echo $1 | grep -q '=' ; then
                modname=`echo $1 | sed 's/^--builtin=//'`
            else
                modname=$2
                shift
            fi              
            builtins="$builtins $modname"
            ;;

        --version)
            echo "mkinitrd: version $VERSION"
            exit 0
            ;;

        -v)
            verbose=-v
            ;;

        --nocompress)
            compress=""
            ;;

        --nopivot)
            pivot=""
            ;;

        --ifneeded)
            # legacy
            ;;

        -f)
            force=1
            ;;
        --preload*)
            if echo $1 | grep -q '=' ; then
                modname=`echo $1 | sed 's/^--preload=//'`
            else
                modname=$2
                shift
            fi              
            PREMODS="$PREMODS $modname"
            ;;
        --omit-scsi-modules)
            PRESCSIMODS=""
            noscsi=1;
            ;;
        --omit-raid-modules)
            noraid=1;
            ;;
        --omit-lvm-modules)
            nolvm=1
            ;;
        --image-version)
            img_vers=yes
            ;;
        --noudev)
            USE_UDEV=
            ;;
        --allow-missing)
            allowmissing=yes
            ;;
        *)
            if [ -z "$target" ]; then
                target=$1
            elif [ -z "$kernel" ]; then
                kernel=$1
            else
                usage
            fi
            ;;
    esac

    shift
done

if [ -z "$target" -o -z "$kernel" ]; then
    usage
fi

if [ -n "$img_vers" ]; then
    target="$target-$kernel"
fi

if [ -z "$force" -a -f $target ]; then
    echo "$target already exists." >&2
    exit 1
fi

if [ ! -d /lib/modules/$kernel ]; then
    echo "/lib/modules/$kernel is not a directory." >&2
    exit 1
fi

if [ $UID != 0 ]; then
    echo "mkinitrd must be run as root"
    exit 1
fi

kernelmajor=`echo $kernel | cut -d . -f 1,2`

if [ "$kernelmajor" == "2.4" ]; then
    if [ -n "$verbose" ]; then echo "Creating old-style initrd"; fi
    USE_UDEV=
else
    if [ -n "$verbose" ]; then echo "Creating initramfs"; fi
    modulefile=/etc/modprobe.conf
    initramfs=1
    pivot=""
fi

# if we're not using udev, don't set any of the other bits
[ -z "$USE_UDEV" ] && UDEV_TMPFS= && UDEV_KEEP_DEV=

# find a temporary directory which doesn't use tmpfs
TMPDIR="/tmp"
# for t in /tmp /var/tmp /root ${PWD}; do
#    if [ ! -d $t ]; then continue; fi
#    if ! echo access -w $t | /sbin/nash --quiet; then continue; fi
#
#    fs=$(df -T $t 2>/dev/null | awk '{line=$1;} END {printf $2;}')
#    if [ "$fs" != "tmpfs" ]; then 
#       TMPDIR=$t
#       break
#    fi
# done

if [ -z "$TMPDIR" ]; then
    echo "no temporary directory could be found" >&2
    exit 1
fi

if [ $TMPDIR = "/root" -o $TMPDIR = "${PWD}" ]; then 
    echo "WARNING: using $TMPDIR for temporary files" >&2
fi

for n in $PREMODS; do
        findmodule $n
done

needusb=""
if [ -n "$withusb" ]; then
    # If / or /boot is on a USB device include the driver. With root by
    # label we could still get some odd behaviors
    for fs in / /boot ; do
        esc=$(echo $fs | sed 's,/,\\/,g')
        dev=$(mount | awk "/ on ${esc} / { print \$1 }" | sed 's/[0-9]*$//' | cut -d/ -f3)
        if [ "$(echo $dev | cut -c1-2)" = sd ]; then
          if [ `which kudzu 2>/dev/null` ]; then
            host=$(kudzu --probe -b scsi |
              gawk '/^device: '${dev}'/,/^host:/ { if (/^host/) { print $2; exit; } }')
            if [ -d /proc/scsi/usb-storage-${host} -o -f /proc/scsi/usb-storage/${host} ]; then
                needusb=1
            fi
          fi
        fi
    done
fi

if [ -n "$needusb" ]; then
    drivers=$(awk '/^alias[[:space:]]+usb-controller[0-9]* / { print $3}' < $modulefile)
    if [ -n "$drivers" ]; then
        for driver in $drivers; do
            findmodule $driver
        done
        findmodule scsi_mod
        findmodule sd_mod
        findmodule usb-storage
    fi
fi

if [ -z "$noscsi" ]; then
    if [ ! -f $modulefile ]; then
        modulefile=/etc/conf.modules
    fi

    if [ -f $modulefile ]; then
        scsimodules=`grep "alias[[:space:]]\+scsi_hostadapter" $modulefile | grep -v '^[        ]*#' | LC_ALL=C sort -u | awk '{ print $3 }'`

        if [ -n "$scsimodules" ]; then
            for n in $PRESCSIMODS; do
                findmodule $n
            done

            for n in $scsimodules; do
    # for now allow scsi modules to come from anywhere.  There are some
    # RAID controllers with drivers in block/
                findmodule $n
            done
        fi
    fi
fi

# If we have ide devices and module ide, do the right thing
ide=/proc/ide/ide*
if [ -n "$ide" ]; then
    findmodule -ide-disk
fi

# If we use LVM, include lvm-mod
if [ -z "$nolvm" ]; then
    if [ -f /proc/lvm/global  ]; then
        if  grep -q '^VG:' /proc/lvm/global ; then
            if [ "$kernelmajor" == "2.4" ]; then
                findmodule -lvm-mod
            else
                findmodule -dm-mod
            fi
        fi
    fi

    if [ -x /sbin/dmsetup -a -e /dev/mapper/control ]; then
        dmout=$(/sbin/dmsetup ls 2>/dev/null)
        if [ "$dmout" != "No devices found" -a "$dmout" != "" ]; then
            findmodule -dm-mod
        fi
    fi
fi

# If we have dasd devices, include the necessary modules (S/390)
if [ -d /proc/dasd ]; then
    findmodule -dasd_mod
    findmodule -dasd_eckd_mod
    findmodule -dasd_fba_mod
fi

if [ -z "$noraid" -a -f /proc/mdstat ]; then
    # load appropriate raid devices if necessary -- we'll load whatever
    # /proc/mdstat suggests

    # note that the awk below contains a space and a tab
    for level in $(awk '/^md[0-9][0-9]*[        ]*:/ { print $4 }' \
                    /proc/mdstat | sort -u); do
        case $level in
        linear)
            findmodule linear
            startraid=1
            ;;
        multipath)
            findmodule multipath
            startraid=1
            ;;
        raid[01456])
            findmodule $level
            startraid=1
            ;;
        *)
            echo "raid level $level (in /proc/mdstat) not recognized" >&2
            ;;
        esac
    done

    if [ -n "$startraid" ]; then
        raiddevices=$(awk '/^md[0-9][0-9]*[        ]*:/ { print $1 }' \
                            /proc/mdstat | sort)
    fi
fi

# check to see if we need to set up a loopback filesystem
rootdev=$(awk '/^[ \t]*[^#]/ { if ($2 == "/") { print $1; }}' $fstab)
if echo $rootdev | cut -d/ -f3 | grep -q loop ; then
    key="^# $(echo $rootdev | cut -d/ -f3 | tr '[a-z]' '[A-Z]'):"
    if ! grep "$key" $fstab > /dev/null; then
        echo "The root filesystem is on a $rootdev, but there is no magic entry in $fstab" 1>&2
        echo "for this device. Consult the mkinitrd man page for more information" 2>&2
        exit 1
    fi

    line=$(grep "$key" $fstab)
    loopDev=$(echo $line | awk '{print $3}')
    loopFs=$(echo $line | awk '{print $4}')
    loopFile=$(echo $line | awk '{print $5}')

    basicmodules="$basicmodules -loop"
    if [ "$loopFs" = "vfat" -o "$loopFs" = "msdos" ]; then
        basicmodules="$basicmodules -fat"
    fi
    basicmodules="$basicmodules -${loopFs}"
# check if the root fs is on a logical volume
elif ! echo $rootdev | cut -c1-6 |grep -q "LABEL=" ; then
    if echo $rootdev | grep -q /dev/mapper 2>/dev/null ; then
        root_vg=$(echo $rootdev | cut -d/ -f4 | cut -d- -f1)
    else
        root_vg=$(echo $rootdev | cut -d/ -f3)
    fi

    rootdev=$(echo "readlink $rootdev" | /sbin/nash --quiet)
    major=`ls -l $rootdev | sed -e "s/.* \\([0-9]\+\\), *[0-9]\+.*/\\1/"`
    [ "$major" != "58" ] || root_lvm=1
    if echo $rootdev |grep -q /dev/mapper 2>/dev/null ; then root_lvm=1 ; fi
fi

rootfs=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $3; exit }}' $fstab)
rootopts=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $4; exit }}' $fstab)

# in case the root filesystem is modular
findmodule -${rootfs}

if [ -n "$root_lvm" ]; then
    if [ "$kernelmajor" == "2.4" ]; then    
        findmodule -lvm-mod
    else
        findmodule -dm-mod
        # DM requires all of these to be there in case someone used the
        # feature.  broken.  (#132001)
        findmodule -dm-mirror
        findmodule -dm-zero
        findmodule -dm-snapshot
    fi
fi

for n in $basicmodules; do 
    findmodule $n
done

if [ -n "$verbose" ]; then
    echo "Using modules: $MODULES"
fi


MNTIMAGE=`mktemp -d ${TMPDIR}/initrd.XXXXXX`
IMAGE=`mktemp ${TMPDIR}/initrd.img.XXXXXX`
if [ -z "$initramfs" ]; then
    MNTPOINT=`mktemp -d ${TMPDIR}/initrd.mnt.XXXXXX`
    RCFILE=$MNTIMAGE/linuxrc
else
    RCFILE=$MNTIMAGE/init
fi

if [ -z "$MNTIMAGE" -o -z "$IMAGE" ]; then
    echo "Error creating temporaries.  Try again" >&2
    exit 1
fi

if [ -z "$initramfs" ]; then
  dd if=/dev/zero of=$IMAGE bs=1k count=$IMAGESIZE 2> /dev/null || exit 1

  LODEV=$(echo findlodev | /sbin/nash --quiet)

  if [ -z "$LODEV" ]; then
    rm -rf $MNTIMAGE $MNTPOINT $IMAGE
    echo "All of your loopback devices are in use." >&2
    exit 1
  fi

  losetup ${LODEV} $IMAGE || exit 1

  # We have to "echo y |" so that it doesn't complain about $IMAGE not
  # being a block device
  echo y | mke2fs $LODEV $IMAGESIZE >/dev/null 2>/dev/null
  tune2fs -i0 $LODEV >/dev/null

  if [ -n "$verbose" ]; then
      echo "Using loopback device $LODEV"
  fi

  mkdir -p $MNTPOINT
  mount -t ext2 $LODEV $MNTPOINT || {
        echo "Can't get a loopback device"
        exit 1
  }

  # We don't need this directory, so let's save space
  rmdir $MNTPOINT/lost+found >/dev/null 2>&1
fi

mkdir -p $MNTIMAGE
mkdir -p $MNTIMAGE/lib
mkdir -p $MNTIMAGE/bin
mkdir -p $MNTIMAGE/etc
mkdir -p $MNTIMAGE/dev
mkdir -p $MNTIMAGE/loopfs
mkdir -p $MNTIMAGE/proc
mkdir -p $MNTIMAGE/sys
mkdir -p $MNTIMAGE/sysroot
ln -s bin $MNTIMAGE/sbin

inst /sbin/nash "$MNTIMAGE/bin/nash"
inst /sbin/insmod.static "$MNTIMAGE/bin/insmod"
ln -s /sbin/nash $MNTIMAGE/sbin/modprobe

if [ -n "$USE_UDEV" ]; then
    inst /sbin/udev.static $MNTIMAGE/sbin/udev
    ln -s udev $MNTIMAGE/sbin/udevstart
    mkdir -p $MNTIMAGE/etc/udev
    inst /etc/udev/udev.conf $MNTIMAGE/etc/udev/udev.conf
    ln -s /sbin/nash $MNTIMAGE/sbin/hotplug
fi

for MODULE in $MODULES; do
    if [ -x /usr/bin/strip ]; then
        /usr/bin/strip -g $verbose /lib/modules/$kernel/$MODULE -o $MNTIMAGE/lib/$(basename $MODULE)
    else
        cp $verbose -a /lib/modules/$kernel/$MODULE $MNTIMAGE/lib
    fi
done

# mknod'ing the devices instead of copying them works both with and
# without devfs...
mknod $MNTIMAGE/dev/console c 5 1
mknod $MNTIMAGE/dev/null c 1 3
mknod $MNTIMAGE/dev/ram b 1 1
mknod $MNTIMAGE/dev/systty c 4 0
for i in 1 2 3 4; do
    mknod $MNTIMAGE/dev/tty$i c 4 $i
done

# FIXME -- this won't work if you're using devfs
if [ -n "$root_lvm" -a "$kernelmajor" == "2.4" ]; then
    pvs=$(/sbin/pvscan | grep " PV " | /bin/awk {'print $5;'} |sed 's/"//g')
    for pv in $pvs; do
        cp $verbose --parents -a $pv $MNTIMAGE/
    done

    inst /sbin/vgwrapper "$MNTIMAGE/bin/vgwrapper"
    ln "$MNTIMAGE/bin/vgwrapper" "$MNTIMAGE/bin/vgscan"
    ln "$MNTIMAGE/bin/vgwrapper" "$MNTIMAGE/bin/vgchange"

    mknod $MNTIMAGE/dev/lvm b 109 0
fi

if [ -n "$root_lvm" -a "$kernelmajor" == "2.6" ]; then
    inst /sbin/lvm.static "$MNTIMAGE/bin/lvm"
    if [ -f /etc/lvm/lvm.conf ]; then
        cp $verbose --parents /etc/lvm/lvm.conf $MNTIMAGE/
    fi
fi

echo "#!/bin/nash" > $RCFILE
echo "" >> $RCFILE

echo "mount -t proc /proc /proc" >> $RCFILE
echo "setquiet" >> $RCFILE
echo "echo Mounted /proc filesystem" >> $RCFILE

if [ "$kernelmajor" != "2.4" ]; then
    echo "echo Mounting sysfs" >> $RCFILE
    echo "mount -t sysfs none /sys" >> $RCFILE
fi

if [ -n "$USE_UDEV" ]; then
    if [ -n "$UDEV_TMPFS" ]; then
        cat >> $RCFILE <<EOF
echo Creating /dev
mount -o mode=0755 -t tmpfs none /dev
mknod /dev/console c 5 1
mknod /dev/null c 1 3
mknod /dev/zero c 1 5
mkdir /dev/pts
mkdir /dev/shm
EOF
    fi
    cat >> $RCFILE <<EOF
echo Starting udev
/sbin/udevstart
echo -n "/sbin/hotplug" > /proc/sys/kernel/hotplug
EOF
fi

for MODULE in $MODULES; do
    text=""
    module=`echo $MODULE | sed "s|.*/||" | sed "s/.k\?o$//"`
    fullmodule=`echo $MODULE | sed "s|.*/||"`

    options=`sed -n -e "s/^options[     ][      ]*$module[      ][      ]*//p" $modulefile 2>/dev/null`

    if [ -n "$verbose" ]; then
        if [ -n "$options" ]; then
            text=" with options $options"
        fi
        echo "Loading module $module$text"
    fi
    echo "echo \"Loading $fullmodule module\"" >> $RCFILE
    echo "insmod /lib/$fullmodule $options" >> $RCFILE

    # Hack - we need a delay after loading usb-storage to give things
    #        time to settle down before we start looking a block devices
    if [ "$module" = "usb-storage" ]; then
        echo "sleep 5" >> $RCFILE
    fi
    if [ "$module" = "zfcp" -a -f /etc/zfcp.conf ]; then
        echo "sleep 2" >> $RCFILE
        cat /etc/zfcp.conf | grep -v "^#" | tr "A-Z" "a-z" | while read DEVICE SCSIID WWPN SCSILUN FCPLUN; do
            echo "echo -n $WWPN > /sys/bus/ccw/drivers/zfcp/${DEVICE/0x/}/port_add" >>$RCFILE
            echo "echo -n $FCPLUN > /sys/bus/ccw/drivers/zfcp/${DEVICE/0x/}/$WWPN/unit_add" >>$RCFILE
            echo "echo -n 1 > /sys/bus/ccw/drivers/zfcp/${DEVICE/0x/}/online" >>$RCFILE
        done
    fi
done

# HACK: module loading + device creation isn't necessarily synchronous...
# this will make sure that we have all of our devices before trying
# things like RAID or LVM
if [ -n "$USE_UDEV" ]; then
  echo "/sbin/udevstart" >> $RCFILE
fi

if [ -n "$startraid" ]; then
    for dev in $raiddevices; do
        cp -a /dev/${dev} $MNTIMAGE/dev
        echo "raidautorun /dev/${dev}" >> $RCFILE
    done
fi

if [ -z "$USE_UDEV" ]; then
    echo "echo Creating block devices" >> $RCFILE
    echo "mkdevices /dev" >> $RCFILE
fi

if [ -n "$loopDev" ]; then
    mkdir /initrd
    cp -a $loopDev $MNTIMAGE/dev
    cp -a $rootdev $MNTIMAGE/dev
    echo "echo Mounting device containing loopback root filesystem" >> $RCFILE
    echo "mount -t $loopFs $loopDev /loopfs" >> $RCFILE
    echo "echo Setting up loopback device $rootdev" >> $RCFILE
    echo "losetup $rootdev /loopfs$loopFile" >> $RCFILE
elif [ -n "$root_lvm" ]; then
  if [ "$kernelmajor" == "2.4" ]; then
    echo "echo Scanning logical volumes" >> $RCFILE
    echo "vgscan" >> $RCFILE
    echo "echo Activating logical volumes" >> $RCFILE
    echo "vgchange -ay" >> $RCFILE
  else
    echo "echo Making device-mapper control node" >> $RCFILE
    echo "mkdmnod" >> $RCFILE
    echo "echo Scanning logical volumes" >> $RCFILE
    echo "lvm vgscan --ignorelockingfailure" >> $RCFILE
    echo "echo Activating logical volumes" >> $RCFILE
    echo "lvm vgchange -ay --ignorelockingfailure $root_vg" >> $RCFILE
  fi
fi

echo "echo Creating root device" >> $RCFILE
echo "mkrootdev /dev/root" >> $RCFILE
rootdev=/dev/root

if [ "$kernelmajor" != "2.4" ]; then
    echo "umount /sys" >> $RCFILE
fi

if [ -n "$initramfs" ]; then
    echo "echo Mounting root filesystem" >> $RCFILE
    echo "mount -o $rootopts --ro -t $rootfs $rootdev /sysroot" >> $RCFILE

    [  -n "$UDEV_KEEP_DEV" ] && echo "mount -t tmpfs --bind /dev /sysroot/dev" >> $RCFILE

    echo "echo Switching to new root" >> $RCFILE
    echo "switchroot /sysroot" >> $RCFILE
else 
  if [ -n "$pivot" ]; then
    echo "echo 0x0100 > /proc/sys/kernel/real-root-dev" >> $RCFILE

    echo "echo Mounting root filesystem" >> $RCFILE
    echo "mount -o $rootopts --ro -t $rootfs $rootdev /sysroot" >> $RCFILE

    echo "pivot_root /sysroot /sysroot/initrd" >> $RCFILE
    echo "umount /initrd/proc" >> $RCFILE
  else
    echo "umount /proc" >> $RCFILE
  fi
fi

[ -n "$UDEV_TMPFS" ] && echo "umount /initrd/dev" >> $RCFILE
chmod +x $RCFILE

if [ -z "$initramfs" ]; then
  (cd $MNTIMAGE; tar cf - .) | (cd $MNTPOINT; tar xf -) || exit 1

  umount $MNTPOINT
  losetup -d $LODEV
else
  (cd $MNTIMAGE; find . | cpio --quiet -c -o) > $IMAGE || exit 1
fi

if [ -n "$compress" ]; then
    gzip -9 < $IMAGE > $target || rc=1
else
    cp -a $IMAGE $target || rc=1
fi
rm -rf $MNTIMAGE $IMAGE
if [ -n "$MNTPOINT" ]; then rm -rf $MNTPOINT ; fi

exit $rc