Subversion Repositories livecd

#!/bin/bash

#

# livecd-mkinitrd:

#

#  mkinitrd used by livecd-install script

#  - based on mkinitrd from RHEL4

#  - TMPDIR=/tmp

#  - comment out test of TMPDIR

#

# Urs Beyerle

#

# mkinitrd

#

# Copyright 2005,2006 Red Hat, Inc.

#

# Written by Erik Troan <ewt@redhat.com>

#

# Contributors:

#	Elliot Lee <sopwith@cuc.edu>

#	Miguel de Icaza <miguel@nuclecu.unam.mx>

#	Christian 'Dr. Disk' Hechelmann <drdisk@ds9.au.s.shuttle.de>

#	Michael K. Johnson <johnsonm@redhat.com>

#	Pierre Habraken <Pierre.Habraken@ujf-grenoble.fr>

#	Jakub Jelinek <jakub@redhat.com>

#	Carlo Arenas Belon (carenas@chasqui.lared.net.pe>

#	Keith Owens <kaos@ocs.com.au>

#	Bernhard Rosenkraenzer <bero@redhat.com>

#	Matt Wilson <msw@redhat.com>

#       Trond Eivind Glomsrød <teg@redhat.com>

#       Jeremy Katz <katzj@redhat.com>

#       Preston Brown <pbrown@redhat.com>

#	Bill Nottingham <notting@redhat.com>

#       Guillaume Cottenceau <gc@mandrakesoft.com>

#	Peter Jones <pjones@redht.com>

PATH=/sbin:/usr/sbin:/bin:/usr/bin:$PATH

export PATH

VERSION=4.2.1.8

compress=1

allowmissing=""

target=""

kernel=""

force=""

verbose=""

MODULES=""

img_vers=""

builtins=""

pivot=1

initramfs=""

modulefile=/etc/modules.conf

rc=0

IMAGESIZE=8000

PRESCSIMODS="scsi_mod sd_mod unknown"

fstab="/etc/fstab"

if [ -f /etc/udev/udev.conf ]; then

    USE_UDEV="yes"

    UDEV_TMPFS="yes"

    UDEV_KEEP_DEV="yes"

    . /etc/udev/udev.conf

    [ -x /sbin/udev.static ] || USE_UDEV=

fi

usage () {

    echo "usage: `basename $0` [--version] [-v] [-f] [--preload <module>]" >&2

    echo "       [--omit-scsi-modules] [--omit-raid-modules] [--omit-lvm-modules]" >&2

    echo "       [--with=<module>] [--image-version] [--fstab=<fstab>] [--nocompress]" >&2

    echo "       [--builtin=<module>] [--nopivot] <initrd-image> <kernel-version>" >&2

    echo "" >&2

    echo "       (ex: `basename $0` /boot/initrd-2.2.5-15.img 2.2.5-15)" >&2

    exit 1

}

moduledep() {

    if [ ! -f "/lib/modules/$kernel/modules.dep" ]; then

	echo "No dep file found for kernel $kernel" >&2

	exit 1

    fi

    [ -n "$verbose" ] && echo -n "Looking for deps of module $1"

    deps=$(awk 'BEGIN { searched=ARGV[2]; ARGV[2]=""; rc=1 } \

                function modname(filename) { match(filename, /\/([^\/]+)\.k?o:?$/, ret); return ret[1] } \

                function show() { if (orig == searched) { print dep; orig=""; rc=0; exit } } \

                /^\/lib/ { show(); \

                           orig=modname($1); dep=""; \

                           if ($2) { for (i = 2; i <= NF; i++) { dep=sprintf("%s %s", dep, modname($i)); } } } \

                /^	/ { dep=sprintf("%s %s", dep, modname($1));  } \

                END      { show(); exit(rc) }' /lib/modules/$kernel/modules.dep $1)

    [ -n "$verbose" ] && echo -e "\t$deps"

}

findmodule() {

    skiperrors=""

    if [ $1 == "--skiperrors" ]; then

	skiperrors=--skiperrors

	shift

    fi

    local modName=$1

    if [ "$modName" = "off" -o "$modName" = "null" ]; then

	return

    fi

    if [ $(echo $modName | cut -b1) = "-" ]; then

	skiperrors=--skiperrors

	modName=$(echo $modName | cut -b2-)

    fi

    if echo $builtins | egrep -q '(^| )'$modName'( |$)' ; then

	[ -n "$verbose" ] && echo "module $modName assumed to be built in"

	set +x

	return

    fi

    # special cases

    if [ "$modName" = "i2o_block" ]; then

	findmodule i2o_core

	findmodule -i2o_pci

	modName="i2o_block"

    elif [ "$modName" = "ppa" ]; then

	findmodule parport

	findmodule parport_pc

	modName="ppa"

    elif [ "$modName" = "sbp2" ]; then

	findmodule ieee1394

	findmodule ohci1394

	modName="sbp2"

    else

	moduledep $modName

	for i in $deps; do

	    findmodule $i

	done

    fi

    for modExt in o.gz o ko ; do

	if [ -d /lib/modules/$kernel/updates ]; then

	    fmPath=`(cd /lib/modules/$kernel/updates; echo find . -name $modName.$modExt -type f | /sbin/nash --quiet) | /bin/awk {'print $1; exit;'}`

	fi

	if [ -f /lib/modules/$kernel/updates/$fmPath ]; then

	    fmPath=updates/$fmPath

	    break

	fi

	fmPath=`(cd /lib/modules/$kernel; echo find . -name $modName.$modExt -type f | /sbin/nash --quiet) | /bin/awk {'print $1; exit;'}`

	if [ -f /lib/modules/$kernel/$fmPath ]; then

	    break

	fi

    done

    if [ ! -f /lib/modules/$kernel/$fmPath ]; then

	if [ -n "$skiperrors" ]; then

	    return

	fi

        # ignore the absence of the scsi modules

	for n in $PRESCSIMODS; do

	    if [ "$n" = "$modName" ]; then

		return;

	    fi

	done;

	if [ -n "$allowmissing" ]; then

	    echo "WARNING: No module $modName found for kernel $kernel, continuing anyway" >&2

	    return

	fi

	echo "No module $modName found for kernel $kernel, aborting." >&2

	exit 1

    fi

    # only need to add each module once

    if ! echo $MODULES | grep -q "$fmPath" 2>/dev/null ; then

	MODULES="$MODULES $fmPath"

    fi

}

inst() {

    if [ "$#" != "2" ];then

        echo "usage: inst <file> <destination>"

        return

    fi 

    [ -n "$verbose" ] && echo "$1 -> $2"

    cp $1 $2

}

while [ $# -gt 0 ]; do

    case $1 in

	--fstab*)

	    if echo $1 | grep -q '=' ; then

	    	fstab=`echo $1 | sed 's/^--fstab=//'`

	    else

		fstab=$2

		shift

	    fi		    

	    ;;

	--with-usb)

	    withusb=yes

	    ;;

	--with*)

	    if echo $1 | grep -q '=' ; then

	    	modname=`echo $1 | sed 's/^--with=//'`

	    else

		modname=$2

		shift

	    fi		    

	    basicmodules="$basicmodules $modname"

	    ;;

	--builtin*)

	    if echo $1 | grep -q '=' ; then

	    	modname=`echo $1 | sed 's/^--builtin=//'`

	    else

		modname=$2

		shift

	    fi		    

	    builtins="$builtins $modname"

	    ;;

	--version)

	    echo "mkinitrd: version $VERSION"

	    exit 0

	    ;;

	-v)

	    verbose=-v

	    ;;

	--nocompress)

	    compress=""

	    ;;

	--nopivot)

	    pivot=""

	    ;;

	--ifneeded)

	    # legacy

	    ;;

	-f)

	    force=1

	    ;;

	--preload*)

	    if echo $1 | grep -q '=' ; then

	    	modname=`echo $1 | sed 's/^--preload=//'`

	    else

		modname=$2

		shift

	    fi		    

	    PREMODS="$PREMODS $modname"

	    ;;

	--omit-scsi-modules)

	    PRESCSIMODS=""

	    noscsi=1;

	    ;;

	--omit-raid-modules)

	    noraid=1;

	    ;;

	--omit-lvm-modules)

	    nolvm=1

	    ;;

	--image-version)

	    img_vers=yes

	    ;;

	--noudev)

	    USE_UDEV=

	    ;;

	--allow-missing)

	    allowmissing=yes

	    ;;

	*)

	    if [ -z "$target" ]; then

		target=$1

	    elif [ -z "$kernel" ]; then

		kernel=$1

	    else

		usage

	    fi

	    ;;

    esac

    shift

done

if [ -z "$target" -o -z "$kernel" ]; then

    usage

fi

if [ -n "$img_vers" ]; then

    target="$target-$kernel"

fi

if [ -z "$force" -a -f $target ]; then

    echo "$target already exists." >&2

    exit 1

fi

if [ ! -d /lib/modules/$kernel ]; then

    echo "/lib/modules/$kernel is not a directory." >&2

    exit 1

fi

if [ $UID != 0 ]; then

    echo "mkinitrd must be run as root"

    exit 1

fi

kernelmajor=`echo $kernel | cut -d . -f 1,2`

if [ "$kernelmajor" == "2.4" ]; then

    if [ -n "$verbose" ]; then echo "Creating old-style initrd"; fi

    USE_UDEV=

else

    if [ -n "$verbose" ]; then echo "Creating initramfs"; fi

    modulefile=/etc/modprobe.conf

    initramfs=1

    pivot=""

fi

# if we're not using udev, don't set any of the other bits

[ -z "$USE_UDEV" ] && UDEV_TMPFS= && UDEV_KEEP_DEV=

# find a temporary directory which doesn't use tmpfs

TMPDIR="/tmp"

# for t in /tmp /var/tmp /root ${PWD}; do

#    if [ ! -d $t ]; then continue; fi

#    if ! echo access -w $t | /sbin/nash --quiet; then continue; fi

#

#    fs=$(df -T $t 2>/dev/null | awk '{line=$1;} END {printf $2;}')

#    if [ "$fs" != "tmpfs" ]; then 

#	TMPDIR=$t

#	break

#    fi

# done

if [ -z "$TMPDIR" ]; then

    echo "no temporary directory could be found" >&2

    exit 1

fi

if [ $TMPDIR = "/root" -o $TMPDIR = "${PWD}" ]; then 

    echo "WARNING: using $TMPDIR for temporary files" >&2

fi

for n in $PREMODS; do

	findmodule $n

done

needusb=""

if [ -n "$withusb" ]; then

    # If / or /boot is on a USB device include the driver. With root by

    # label we could still get some odd behaviors

    for fs in / /boot ; do

	esc=$(echo $fs | sed 's,/,\\/,g')

	dev=$(mount | awk "/ on ${esc} / { print \$1 }" | sed 's/[0-9]*$//' | cut -d/ -f3)

	if [ "$(echo $dev | cut -c1-2)" = sd ]; then

          if [ `which kudzu 2>/dev/null` ]; then

	    host=$(kudzu --probe -b scsi |

	      gawk '/^device: '${dev}'/,/^host:/ { if (/^host/) { print $2; exit; } }')

	    if [ -d /proc/scsi/usb-storage-${host} -o -f /proc/scsi/usb-storage/${host} ]; then

		needusb=1

	    fi

          fi

	fi

    done

fi

if [ -n "$needusb" ]; then

    drivers=$(awk '/^alias[[:space:]]+usb-controller[0-9]* / { print $3}' < $modulefile)

    if [ -n "$drivers" ]; then

	for driver in $drivers; do

	    findmodule $driver

	done

	findmodule scsi_mod

	findmodule sd_mod

	findmodule usb-storage

    fi

fi

if [ -z "$noscsi" ]; then

    if [ ! -f $modulefile ]; then

        modulefile=/etc/conf.modules

    fi

    if [ -f $modulefile ]; then

	scsimodules=`grep "alias[[:space:]]\+scsi_hostadapter" $modulefile | grep -v '^[ 	]*#' | LC_ALL=C sort -u | awk '{ print $3 }'`

	if [ -n "$scsimodules" ]; then

	    for n in $PRESCSIMODS; do

		findmodule $n

	    done

	    for n in $scsimodules; do

    # for now allow scsi modules to come from anywhere.  There are some

    # RAID controllers with drivers in block/

		findmodule $n

	    done

	fi

    fi

fi

# If we have ide devices and module ide, do the right thing

ide=/proc/ide/ide*

if [ -n "$ide" ]; then

    findmodule -ide-disk

fi

# If we use LVM, include lvm-mod

if [ -z "$nolvm" ]; then

    if [ -f /proc/lvm/global  ]; then

        if  grep -q '^VG:' /proc/lvm/global ; then

	    if [ "$kernelmajor" == "2.4" ]; then

		findmodule -lvm-mod

	    else

		findmodule -dm-mod

	    fi

        fi

    fi

    if [ -x /sbin/dmsetup -a -e /dev/mapper/control ]; then

	dmout=$(/sbin/dmsetup ls 2>/dev/null)

	if [ "$dmout" != "No devices found" -a "$dmout" != "" ]; then

	    findmodule -dm-mod

	fi

    fi

fi

# If we have dasd devices, include the necessary modules (S/390)

if [ -d /proc/dasd ]; then

    findmodule -dasd_mod

    findmodule -dasd_eckd_mod

    findmodule -dasd_fba_mod

fi

if [ -z "$noraid" -a -f /proc/mdstat ]; then

    # load appropriate raid devices if necessary -- we'll load whatever

    # /proc/mdstat suggests

    # note that the awk below contains a space and a tab

    for level in $(awk '/^md[0-9][0-9]*[ 	]*:/ { print $4 }' \

		    /proc/mdstat | sort -u); do

	case $level in

	linear)

	    findmodule linear

	    startraid=1

	    ;;

	multipath)

	    findmodule multipath

	    startraid=1

	    ;;

	raid[01456])

	    findmodule $level

	    startraid=1

	    ;;

	*)

	    echo "raid level $level (in /proc/mdstat) not recognized" >&2

	    ;;

	esac

    done

    if [ -n "$startraid" ]; then

	raiddevices=$(awk '/^md[0-9][0-9]*[        ]*:/ { print $1 }' \

			    /proc/mdstat | sort)

    fi

fi

# check to see if we need to set up a loopback filesystem

rootdev=$(awk '/^[ \t]*[^#]/ { if ($2 == "/") { print $1; }}' $fstab)

if echo $rootdev | cut -d/ -f3 | grep -q loop ; then

    key="^# $(echo $rootdev | cut -d/ -f3 | tr '[a-z]' '[A-Z]'):"

    if ! grep "$key" $fstab > /dev/null; then

	echo "The root filesystem is on a $rootdev, but there is no magic entry in $fstab" 1>&2

	echo "for this device. Consult the mkinitrd man page for more information" 2>&2

	exit 1

    fi

    line=$(grep "$key" $fstab)

    loopDev=$(echo $line | awk '{print $3}')

    loopFs=$(echo $line | awk '{print $4}')

    loopFile=$(echo $line | awk '{print $5}')

    basicmodules="$basicmodules -loop"

    if [ "$loopFs" = "vfat" -o "$loopFs" = "msdos" ]; then

	basicmodules="$basicmodules -fat"

    fi

    basicmodules="$basicmodules -${loopFs}"

# check if the root fs is on a logical volume

elif ! echo $rootdev | cut -c1-6 |grep -q "LABEL=" ; then

    if echo $rootdev | grep -q /dev/mapper 2>/dev/null ; then

	root_vg=$(echo $rootdev | cut -d/ -f4 | cut -d- -f1)

    else

	root_vg=$(echo $rootdev | cut -d/ -f3)

    fi

    rootdev=$(echo "readlink $rootdev" | /sbin/nash --quiet)

    major=`ls -l $rootdev | sed -e "s/.* \\([0-9]\+\\), *[0-9]\+.*/\\1/"`

    [ "$major" != "58" ] || root_lvm=1

    if echo $rootdev |grep -q /dev/mapper 2>/dev/null ; then root_lvm=1 ; fi

fi

rootfs=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $3; exit }}' $fstab)

rootopts=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $4; exit }}' $fstab)

# in case the root filesystem is modular

findmodule -${rootfs}

if [ -n "$root_lvm" ]; then

    if [ "$kernelmajor" == "2.4" ]; then    

	findmodule -lvm-mod

    else

	findmodule -dm-mod

	# DM requires all of these to be there in case someone used the

	# feature.  broken.  (#132001)

	findmodule -dm-mirror

	findmodule -dm-zero

	findmodule -dm-snapshot

    fi

fi

for n in $basicmodules; do 

    findmodule $n

done

if [ -n "$verbose" ]; then

    echo "Using modules: $MODULES"

fi

MNTIMAGE=`mktemp -d ${TMPDIR}/initrd.XXXXXX`

IMAGE=`mktemp ${TMPDIR}/initrd.img.XXXXXX`

if [ -z "$initramfs" ]; then

    MNTPOINT=`mktemp -d ${TMPDIR}/initrd.mnt.XXXXXX`

    RCFILE=$MNTIMAGE/linuxrc

else

    RCFILE=$MNTIMAGE/init

fi

if [ -z "$MNTIMAGE" -o -z "$IMAGE" ]; then

    echo "Error creating temporaries.  Try again" >&2

    exit 1

fi

if [ -z "$initramfs" ]; then

  dd if=/dev/zero of=$IMAGE bs=1k count=$IMAGESIZE 2> /dev/null || exit 1

  LODEV=$(echo findlodev | /sbin/nash --quiet)

  if [ -z "$LODEV" ]; then

    rm -rf $MNTIMAGE $MNTPOINT $IMAGE

    echo "All of your loopback devices are in use." >&2

    exit 1

  fi

  losetup ${LODEV} $IMAGE || exit 1

  # We have to "echo y |" so that it doesn't complain about $IMAGE not

  # being a block device

  echo y | mke2fs $LODEV $IMAGESIZE >/dev/null 2>/dev/null

  tune2fs -i0 $LODEV >/dev/null

  if [ -n "$verbose" ]; then

      echo "Using loopback device $LODEV"

  fi

  mkdir -p $MNTPOINT

  mount -t ext2 $LODEV $MNTPOINT || {

	echo "Can't get a loopback device"

	exit 1

  }

  # We don't need this directory, so let's save space

  rmdir $MNTPOINT/lost+found >/dev/null 2>&1

fi

mkdir -p $MNTIMAGE

mkdir -p $MNTIMAGE/lib

mkdir -p $MNTIMAGE/bin

mkdir -p $MNTIMAGE/etc

mkdir -p $MNTIMAGE/dev

mkdir -p $MNTIMAGE/loopfs

mkdir -p $MNTIMAGE/proc

mkdir -p $MNTIMAGE/sys

mkdir -p $MNTIMAGE/sysroot

ln -s bin $MNTIMAGE/sbin

inst /sbin/nash "$MNTIMAGE/bin/nash"

inst /sbin/insmod.static "$MNTIMAGE/bin/insmod"

ln -s /sbin/nash $MNTIMAGE/sbin/modprobe

if [ -n "$USE_UDEV" ]; then

    inst /sbin/udev.static $MNTIMAGE/sbin/udev

    ln -s udev $MNTIMAGE/sbin/udevstart

    mkdir -p $MNTIMAGE/etc/udev

    inst /etc/udev/udev.conf $MNTIMAGE/etc/udev/udev.conf

    ln -s /sbin/nash $MNTIMAGE/sbin/hotplug

fi

for MODULE in $MODULES; do

    if [ -x /usr/bin/strip ]; then

	/usr/bin/strip -g $verbose /lib/modules/$kernel/$MODULE -o $MNTIMAGE/lib/$(basename $MODULE)

    else

	cp $verbose -a /lib/modules/$kernel/$MODULE $MNTIMAGE/lib

    fi

done

# mknod'ing the devices instead of copying them works both with and

# without devfs...

mknod $MNTIMAGE/dev/console c 5 1

mknod $MNTIMAGE/dev/null c 1 3

mknod $MNTIMAGE/dev/ram b 1 1

mknod $MNTIMAGE/dev/systty c 4 0

for i in 1 2 3 4; do

    mknod $MNTIMAGE/dev/tty$i c 4 $i

done

# FIXME -- this won't work if you're using devfs

if [ -n "$root_lvm" -a "$kernelmajor" == "2.4" ]; then

    pvs=$(/sbin/pvscan | grep " PV " | /bin/awk {'print $5;'} |sed 's/"//g')

    for pv in $pvs; do

	cp $verbose --parents -a $pv $MNTIMAGE/

    done

    inst /sbin/vgwrapper "$MNTIMAGE/bin/vgwrapper"

    ln "$MNTIMAGE/bin/vgwrapper" "$MNTIMAGE/bin/vgscan"

    ln "$MNTIMAGE/bin/vgwrapper" "$MNTIMAGE/bin/vgchange"

    mknod $MNTIMAGE/dev/lvm b 109 0

fi

if [ -n "$root_lvm" -a "$kernelmajor" == "2.6" ]; then

    inst /sbin/lvm.static "$MNTIMAGE/bin/lvm"

    if [ -f /etc/lvm/lvm.conf ]; then

	cp $verbose --parents /etc/lvm/lvm.conf $MNTIMAGE/

    fi

fi

echo "#!/bin/nash" > $RCFILE

echo "" >> $RCFILE

echo "mount -t proc /proc /proc" >> $RCFILE

echo "setquiet" >> $RCFILE

echo "echo Mounted /proc filesystem" >> $RCFILE

if [ "$kernelmajor" != "2.4" ]; then

    echo "echo Mounting sysfs" >> $RCFILE

    echo "mount -t sysfs none /sys" >> $RCFILE

fi

if [ -n "$USE_UDEV" ]; then

    if [ -n "$UDEV_TMPFS" ]; then

	cat >> $RCFILE <<EOF

echo Creating /dev

mount -o mode=0755 -t tmpfs none /dev

mknod /dev/console c 5 1

mknod /dev/null c 1 3

mknod /dev/zero c 1 5

mkdir /dev/pts

mkdir /dev/shm

EOF

    fi

    cat >> $RCFILE <<EOF

echo Starting udev

/sbin/udevstart

echo -n "/sbin/hotplug" > /proc/sys/kernel/hotplug

EOF

fi

for MODULE in $MODULES; do

    text=""

    module=`echo $MODULE | sed "s|.*/||" | sed "s/.k\?o$//"`

    fullmodule=`echo $MODULE | sed "s|.*/||"`

    options=`sed -n -e "s/^options[ 	][ 	]*$module[ 	][ 	]*//p" $modulefile 2>/dev/null`

    if [ -n "$verbose" ]; then

	if [ -n "$options" ]; then

	    text=" with options $options"

	fi

        echo "Loading module $module$text"

    fi

    echo "echo \"Loading $fullmodule module\"" >> $RCFILE

    echo "insmod /lib/$fullmodule $options" >> $RCFILE

    # Hack - we need a delay after loading usb-storage to give things

    #        time to settle down before we start looking a block devices

    if [ "$module" = "usb-storage" ]; then

	echo "sleep 5" >> $RCFILE

    fi

    if [ "$module" = "zfcp" -a -f /etc/zfcp.conf ]; then

        echo "sleep 2" >> $RCFILE

        cat /etc/zfcp.conf | grep -v "^#" | tr "A-Z" "a-z" | while read DEVICE SCSIID WWPN SCSILUN FCPLUN; do

            echo "echo -n $WWPN > /sys/bus/ccw/drivers/zfcp/${DEVICE/0x/}/port_add" >>$RCFILE

            echo "echo -n $FCPLUN > /sys/bus/ccw/drivers/zfcp/${DEVICE/0x/}/$WWPN/unit_add" >>$RCFILE

            echo "echo -n 1 > /sys/bus/ccw/drivers/zfcp/${DEVICE/0x/}/online" >>$RCFILE

        done

    fi

done

# HACK: module loading + device creation isn't necessarily synchronous...

# this will make sure that we have all of our devices before trying

# things like RAID or LVM

if [ -n "$USE_UDEV" ]; then

  echo "/sbin/udevstart" >> $RCFILE

fi

if [ -n "$startraid" ]; then

    for dev in $raiddevices; do

	cp -a /dev/${dev} $MNTIMAGE/dev

	echo "raidautorun /dev/${dev}" >> $RCFILE

    done

fi

if [ -z "$USE_UDEV" ]; then

    echo "echo Creating block devices" >> $RCFILE

    echo "mkdevices /dev" >> $RCFILE

fi

if [ -n "$loopDev" ]; then

    mkdir /initrd

    cp -a $loopDev $MNTIMAGE/dev

    cp -a $rootdev $MNTIMAGE/dev

    echo "echo Mounting device containing loopback root filesystem" >> $RCFILE

    echo "mount -t $loopFs $loopDev /loopfs" >> $RCFILE

    echo "echo Setting up loopback device $rootdev" >> $RCFILE

    echo "losetup $rootdev /loopfs$loopFile" >> $RCFILE

elif [ -n "$root_lvm" ]; then

  if [ "$kernelmajor" == "2.4" ]; then

    echo "echo Scanning logical volumes" >> $RCFILE

    echo "vgscan" >> $RCFILE

    echo "echo Activating logical volumes" >> $RCFILE

    echo "vgchange -ay" >> $RCFILE

  else

    echo "echo Making device-mapper control node" >> $RCFILE

    echo "mkdmnod" >> $RCFILE

    echo "echo Scanning logical volumes" >> $RCFILE

    echo "lvm vgscan --ignorelockingfailure" >> $RCFILE

    echo "echo Activating logical volumes" >> $RCFILE

    echo "lvm vgchange -ay --ignorelockingfailure $root_vg" >> $RCFILE

  fi

fi

echo "echo Creating root device" >> $RCFILE

echo "mkrootdev /dev/root" >> $RCFILE

rootdev=/dev/root

if [ "$kernelmajor" != "2.4" ]; then

    echo "umount /sys" >> $RCFILE

fi

if [ -n "$initramfs" ]; then

    echo "echo Mounting root filesystem" >> $RCFILE

    echo "mount -o $rootopts --ro -t $rootfs $rootdev /sysroot" >> $RCFILE

    [  -n "$UDEV_KEEP_DEV" ] && echo "mount -t tmpfs --bind /dev /sysroot/dev" >> $RCFILE

    echo "echo Switching to new root" >> $RCFILE

    echo "switchroot /sysroot" >> $RCFILE

else 

  if [ -n "$pivot" ]; then

    echo "echo 0x0100 > /proc/sys/kernel/real-root-dev" >> $RCFILE

    echo "echo Mounting root filesystem" >> $RCFILE

    echo "mount -o $rootopts --ro -t $rootfs $rootdev /sysroot" >> $RCFILE

    echo "pivot_root /sysroot /sysroot/initrd" >> $RCFILE

    echo "umount /initrd/proc" >> $RCFILE

  else

    echo "umount /proc" >> $RCFILE

  fi

fi

[ -n "$UDEV_TMPFS" ] && echo "umount /initrd/dev" >> $RCFILE

chmod +x $RCFILE

if [ -z "$initramfs" ]; then

  (cd $MNTIMAGE; tar cf - .) | (cd $MNTPOINT; tar xf -) || exit 1

  umount $MNTPOINT

  losetup -d $LODEV

else

  (cd $MNTIMAGE; find . | cpio --quiet -c -o) > $IMAGE || exit 1

fi

if [ -n "$compress" ]; then

    gzip -9 < $IMAGE > $target || rc=1

else

    cp -a $IMAGE $target || rc=1

fi

rm -rf $MNTIMAGE $IMAGE

if [ -n "$MNTPOINT" ]; then rm -rf $MNTPOINT ; fi

exit $rc