WebSVN – livecd – Diff – /trunk/customize/runlast


#!/bin/bash
#
# Fix things during bootup - run last 
#
# Urs Beyerle, PSI
#
 
### -----------------------------------------------------------
### definitions
### -----------------------------------------------------------
 
# dir of mounted live system: /$MOUNTDIR/live
MOUNTDIR=livecd
 
# source functions
. /$MOUNTDIR/live/liblinuxlive
. /etc/init.d/functions
 
# defaults for xorg.conf
XORG_CONF=/etc/X11/xorg.conf
 
HSYNC_DEFAULT="30.0-80.0"
VSYNC_DEFAULT="50.0-90.0"
SCREEN_DEFAULT="1400x1050"
 
MODES_DEFAULT='"2048x1536" "1920x1200" "1600x1200" "1400x1050" "1280x1024" "1280x960" "1280x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"'
 
 
### -----------------------------------------------------------
### Get boot parameters
### -----------------------------------------------------------
 
# root on NFS?
NFSROOT=$( cmdline_value nfsroot )
 
# NFS Server
NFSSERVER=$( echo $NFSROOT | cut -d":" -f1 )
 
# no local user?
NOLOCAL=$( cmdline_parameter nolocal )
 
# no root user?
NOROOT=$( cmdline_parameter noroot )
 
# no localadmin?
NOADMIN=$( cmdline_parameter noadmin )
LocalAdminGroup=localadmin
 
# set password
PASSWD=$( cmdline_value passwd )
[ ! $PASSWD ] && PASSWD=$( cmdline_value pw )
 
# no password = empty password ?
NOPASSWD=$( cmdline_parameter nopasswd )
 
# keyboard layout (kb= or keyboard=)
KEYBOARD=$( cmdline_value keyboard )
KB=$( cmdline_value kb )
 
# PSI setup?
PSI=$( cmdline_parameter psi )
 
# cups server
CUPS=$( cmdline_value cups )
 
# failsafe X server
SIMPLEX=$( cmdline_parameter simplex )
 
# NVIDIA driver
NVIDIA=$( cmdline_parameter nvidia )
if [ "$XDRIVER" = "nvidia" ]; then
    NVIDIA=nvidia
fi
 
# force NO NVIDIA driver - will overwite NVIDIA option
NONVIDIA=$( cmdline_parameter nonvidia )
 
# VESA driver
VESA=$( cmdline_parameter vesa )
 
# force to use a video driver ?
XDRIVER=$( cmdline_value xdriver )
 
# Xserver configurations
HSYNC=$( cmdline_value hsync )
VSYNC=$( cmdline_value vsync )
SCREEN=$( cmdline_value screen )
 
# no SWAP
NOSWAP=$( cmdline_parameter noswap )
 
# should we auto mount all found devices?
AUTOMOUNT=$( cmdline_parameter automount )
if [ $AUTOMOUNT ]; then
    MOUNTOPT="auto,users"
else
    MOUNTOPT="noauto,users,ro"
fi
 
# folder where we find data which was previously stored
# (normally on a usbstick, but can be partition)
if [ $PSI ]; then
    SAVEFOLDER=PSI_LIVECD
else
    SAVEFOLDER=SL_LIVECD
fi
 
# local home partition?
# (e.g. /dev/hda1, /dev/hda1:/my_home)
HOMELOCAL=$( cmdline_value home )
 
# fast booting ?
FASTBOOT=$( cmdline_parameter fastboot )
 
# start afs?
AFS=$( cmdline_parameter afs )
 
# or force no afs
[ $( cmdline_parameter noafs ) ] && AFS=""
 
# turn of sound (volume=0)
NOSOUND=$( cmdline_parameter nosound )
 
# local user name?
LOCALUSER=$( cmdline_value user )
 
# hostname?
HOSTNAME=$( cmdline_value hostname )
 
# do we have defined a configuration directory?
CONFIG=$( cmdline_value config )
 
# do not udpate fstab?
NOFSTAB=$( cmdline_parameter nofstab )
 
# kde/gnome as desktop
GNOME=$( cmdline_parameter gnome )
KDE=$( cmdline_parameter kde )
 
# do no fixes (useful for debugging)
NOFIX=$( cmdline_parameter nofix )
 
# do not start network
NONET=$( cmdline_parameter nonet )
 
 
 
### -----------------------------------------------------------
### Functions
### -----------------------------------------------------------
 
reload_soundmodule() {
 
    ### unload/load sound module for snd-card-X (timing problem?)
    if [ ! $NOFIX ]; then
	rpm -q alsa-lib | grep el5 >/dev/null
	if [ "$?" = "0" ]; then
	    # disable kernel messages
	    echo "0" > /proc/sys/kernel/printk
	    sound_modules=$( grep snd-card- /etc/modprobe.conf | awk ' $1 ~ /alias/ { print $3 }' | tr - _ )
	    for module in $sound_modules; do
		lsmod | awk '{ print $1 }' | grep $module >/dev/null 2>&1
		if [ "$?" = "0" ]; then
		    rmmod $module    >/dev/null 2>&1
		    modprobe $module >/dev/null 2>&1
		fi
	    done
	    # enable kernel messages
	    echo "6" > /proc/sys/kernel/printk
	fi
    fi
}
 
 
### -----------------------------------------------------------
### Improved hardware detection
### -----------------------------------------------------------
 
### Improved graphic card detection
 
if [ ! $SIMPLEX ] && [ ! $NOFIX ]; then
 
 
 
 
 
 
 
 
 
    ### Intel Mobile 915GM
    lspci | grep -q VGA.*Intel.*Mobile.*915GM
    if [ "$?" = "0" ]; then
	I915GM=i915gm
	[ $XDRIVER ] || XDRIVER=i810
	I855RESOLUTION=on
    fi
 
    ### Intel Mobile 855GM
    lspci | grep -q VGA.*Intel.*855GM
    if [ "$?" = "0" ]; then
	I855GM=i855gm
	I855RESOLUTION=on
    fi
fi
 
 
### -----------------------------------------------------------
### Main
### -----------------------------------------------------------
 
### try load fuse kernel module
modprobe fuse 2>/dev/null
 
### reload sound module (first time)
reload_soundmodule
 
### activate SWAP
# delete all swap lines in fstab
 sed -i -e "/ swap /d" /etc/fstab
# search for swap partition
fdisk -l > /var/log/fdisk
swap_part=$( fdisk -l 2>/dev/null | grep -i "Linux swap" \
            | grep "^/dev/" | cut -f 1 -d " " | head -1 )
# add to /etc/fstab and activate SWAP
if [ $swap_part ] && [ ! $NOSWAP ]; then
    echo "$swap_part               swap                    swap    defaults 0 0" >>/etc/fstab
    # activate SWAP
    swapoff -a
    swapon -a -e
fi
 
### MAC Address of eth0
MAC_ETH0=$( ifconfig | grep eth0 | awk '{print $5}' )
 
### Get CONFIG_FOLDER for this machine from NFS Server (if existing) 
#   and copy it to /$MOUNTDIR
if [ $NFSSERVER ] && [ $CONFIG ]; then
    mkdir -p /mnt/config
    echo "Search for configuration files on the server ..."
    /etc/init.d/portmap start >/dev/null
    mount -t nfs $NFSSERVER:$CONFIG /mnt/config 2>/dev/null
    if [ "$?" != "0" ]; then
	echo "Could not mount $NFSSERVER:$CONFIG."
    else
	if [ -d /mnt/config/$MAC_ETH0 ]; then
	    CONFIG_FOLDER=/$MOUNTDIR/config
	    mkdir -p $CONFIG_FOLDER
	    cp -a /mnt/config/$MAC_ETH0/* /$CONFIG_FOLDER/ 2>/dev/null
	    if [ "$?" != "0" ]; then
		echo "Could not get $NFSSERVER:$CONFIG/$MAC_ETH0"
		CONFIG_FOLDER=""
	    else
		echo "Found configuration files on the server." 
	    fi	    
	fi
	umount /mnt/config
    fi
    /etc/init.d/portmap stop >/dev/null
fi
 
### search for partitions and update fstab 
### and look for $SAVEFOLDER (previously stored data)
if [ ! $FASTBOOT ] && [ ! $NOFSTAB ]; then
    echo "Update /etc/fstab ..."
    # disable kernel messages during mount/unmount
    echo 0 > /proc/sys/kernel/printk
    DEVICES=$( list_partition_devices )
    for DEVICE in $DEVICES; do
        # try to mount the device and unmount it. 
        # If OK, we can add it to fstab
	DEV=$( echo $DEVICE | cut -d"/" -f 3 )
	if [ $DEV ]; then
	    mkdir -p /mnt/$DEV
	    mount $DEVICE /mnt/$DEV >/dev/null 2>&1
	    # search for $SAVEFOLDER
	    if [ -d /mnt/$DEV/$SAVEFOLDER ]; then
		FOUND_RESTORE_DEV=/dev/$DEV
		echo "Found folder '$SAVEFOLDER' on $FOUND_RESTORE_DEV"
	    fi
	    # unmount again
	    umount /mnt/$DEV >/dev/null 2>&1
	    # if sucsessful add to fstab, if not already done
	    if [ "$?" = "0" ]; then
		grep -q "^$DEVICE " /etc/fstab
		if [ "$?" != "0" ]; then
		    echo -e "$DEVICE \t /mnt/$DEV \t auto \t $MOUNTOPT,suid,dev,exec 0 0" >> /etc/fstab
		fi
	    else
		rmdir /mnt/$DEV 2>/dev/null
	    fi
	fi
    done
    # enable kernel messages again
    echo 6 > /proc/sys/kernel/printk
fi
 
### if $SAVEFOLDER found, set $CONFIG_FOLDER and mount $FOUND_RESTORE_MNT 
if [ $FOUND_RESTORE_DEV ]; then
    FOUND_RESTORE_MNT=$( grep "^$FOUND_RESTORE_DEV " /etc/fstab | awk '{ print $2 }' )
    CONFIG_FOLDER=$FOUND_RESTORE_MNT/$SAVEFOLDER
    echo "Will restore data from $CONFIG_FOLDER"
    mount $FOUND_RESTORE_MNT
fi
 
### source the file "config", if found in $CONFIG_FOLDER
if [ -f $CONFIG_FOLDER/config ]; then
    . $CONFIG_FOLDER/config
fi
 
### do we have a shadow/passwd file in $FOUND_FOULDER 
if [ -r $CONFIG_FOLDER/passwd.tar.gz ] && [ -r $CONFIG_FOLDER/shadow.tar.gz ]; then
    # we do not need a password for local user and root
    NOLOCAL=nolocal
    NOROOT=noroot
fi
 
### set local user name and default hostname
if [ $PSI ]; then
    [ $LOCALUSER ] || LOCALUSER=l_psi
    DEFAULT_HOSTNAME=psi
else
    [ $LOCALUSER ] || LOCALUSER=sluser
    DEFAULT_HOSTNAME=slinux
fi
 
### start 855resolution?
[ $I855RESOLUTION ] && /etc/init.d/855resolution start 2>/dev/null
 
 
 
 
### configure Xserver
 
### check for xorg.conf in CONFIG_FOLDER
if [ -r $CONFIG_FOLDER/xorg.conf ]; then
    cp -af $CONFIG_FOLDER/xorg.conf $XORG_CONF
    if [ "$?" = "0" ]; then
	echo "Saved xorg.conf file found."
	XDRIVER=""
	HAVE_XORG_CONF="yes"
    fi
fi
 
### use vesa driver?
if [ $VESA ]; then
    echo "Force to use VESA driver!"
    video_driver="--set-driver=vesa"
else
    video_driver=""
fi
 
### force an other video driver?
if [ $XDRIVER ]; then
    echo "Force to use $XDRIVER driver!"
    video_driver="--set-driver=$XDRIVER"
fi
 
### configure Xserver
if [ -x /usr/bin/system-config-display ]; then
    echo "Configure Xserver:"
    if [ ! $HAVE_XORG_CONF ]; then
	if [ ! $SIMPLEX ]; then
 
            # default values
	    [ ! $HSYNC ]  && HSYNC="$HSYNC_DEFAULT"
	    [ ! $VSYNC ]  && VSYNC="$VSYNC_DEFAULT"
	    [ ! $SCREEN ] && SCREEN="$SCREEN_DEFAULT"
	    
            # run system-config-display 
	    system-config-display \
		--reconfig \
                -v \
		--set-resolution=$SCREEN \
		--set-hsync=$HSYNC \
		--set-vsync=$VSYNC \
		$video_driver | grep Trying
 
            # system-config-display in SL5 does not work nicely :-(
            # e.g. No Monitor Section
 
	    # add Monitor Section and add Monitor0 to Screen Section
	    grep -q Monitor $XORG_CONF
	    if [ "$?" != "0" ]; then
		echo    "Section \"Monitor\""          >> $XORG_CONF
		echo -e "\tIdentifier   \"Monitor0\""  >> $XORG_CONF
		echo -e "\tHorizSync    $HSYNC"        >> $XORG_CONF
		echo -e "\tVertRefresh  $VSYNC"        >> $XORG_CONF
		echo -e "\tOption       \"dpms\""      >> $XORG_CONF
		echo -e "EndSection"                   >> $XORG_CONF
                sed -i "s|Device     \"Videocard0\"|Device     \"Videocard0\"\n\tMonitor    \"Monitor0\"|" $XORG_CONF
	    fi
 
            # add Modes for $SCREEN, if not yet there
	    grep -q Modes $XORG_CONF
	    if [ "$?" != "0" ]; then
		modeline=$( echo ${MODES_DEFAULT} | sed "s|.*\"$SCREEN|\"$SCREEN|" )
		if [ "$modeline" ]; then
		    sed -i "s|\tDepth.*|\tDepth     24\n\t\tModes $modeline|" $XORG_CONF
		fi
	    fi
 
 
	# simple Xserver configuration.
	else
	    echo "Use simple Xserver configuration."
	    system-config-display --noui --reconfig -v | grep Trying
	fi
    fi
fi
 
 
### enable NVIDIA driver (needs nvidia, nvidia-libs rpms)
if [ $NVIDIA ] && [ ! $NONVIDIA ]; then
    # serach for Nvidia Video Card
    /sbin/lspci | grep VGA | grep -i -q nvidia
    if [ "$?" = "0" ]; then
	# lib or lib64 ?
	LIB=lib
	[ $( arch ) = "x86_64" ] && LIB=lib64
	# find out installed Nvidia driver version
	libglx=$( ls /usr/X11R6/$LIB/modules/extensions/libglx.so.1.* | head -n 1 )
	nvidia_version=${libglx##*.so.1.}
	# enable Nvidia driver (normally done by nvidia-enable - does not work on LiveCD)
	echo -n "NVIDIA graphic card found. Enable the nvidia driver ${nvidia_version} ... " 
	NVLOG=/var/log/nvidia.log
	# assuming that the kernel modules are already build 
	# link to Nvidia libs
	ln -sf ../../usr/X11R6/$LIB/libGL.so.1.${nvidia_version} /usr/$LIB/libGL.so
	ln -sf libGL.so.1.${nvidia_version} /usr/X11R6/$LIB/libGL.so
	mv /usr/X11R6/$LIB/modules/extensions/libGLcore.a /usr/X11R6/$LIB/modules/extensions/xxx.libGLcore.a.saved_by_nvidia
	mv /usr/X11R6/$LIB/modules/extensions/libglx.a /usr/X11R6/$LIB/modules/extensions/xxx.libglx.a.saved_by_nvidia
	ln -sf libglx.so.1.${nvidia_version} /usr/X11R6/$LIB/modules/extensions/libglx.so
	# reconfigure X
	/usr/sbin/nvidia-xconfig >> $NVLOG 2>&1
	if [ $PSI ]; then
	    echo 'NVIDIA=on' >> /etc/sysconfig/cfengine
	fi
	echo "ok."
    fi
fi
 
### set special video driver options for Intel Mobile
 
#   (external VGA output: Clone)
if [ $I915GM ] || [ $I855GM ]; then
    sed -e "/Section[ \t]*\"Device\"/,/EndSection/{
     /^[ \t]*Option[ \t]*\"MonitorLayout\"/d
     /^[ \t]*Option[ \t]*\"Clone/d
     /EndSection/i\\
        Option      \"MonitorLayout\" \"CRT,LFP\"\\
        Option      \"Clone\" \"1\"\\
        Option      \"CloneRefresh\" \"60\"
     }" -i $XORG_CONF
fi
 
# Set BoardName for Intel 915GM
if [ $I915GM ]; then
    sed -i 's/BoardName.*VESA driver.*/BoardName   "Intel 915"/' $XORG_CONF
fi
 
 
### parameter KB = KEYBOARD
KEYBOARD=$KB
 
### ask user for keyboard layout if no keyboard given
if [ -x /usr/bin/system-config-keyboard ]; then
    if [ ! $KEYBOARD ]; then
	MORE_LAYOUTS="more..."
	keytables="U.S...........(us) \
	           Swiss-German..(sg-latin1) \
                   Swiss-French..(fr_CH-latin1) \
                   German........(de-latin1) \
                   Japanese......(jp106) \
                   $MORE_LAYOUTS"
	PS3="-> "
	echo
	echo "Please choose keyboard layout (type 1-6):"
	select KEYBOARD in $keytables;
	  do
	     case $KEYBOARD in
	        *)
	        # extract keyboard layout string from $KEYBOARD
	        KEYBOARD=${KEYBOARD##*(}
                KEYBOARD=${KEYBOARD%%)}
                break
                ;;
	     esac
	  done
    fi
fi
 
### set keyboard
if [ -x /usr/bin/system-config-keyboard ]; then
    if [ "$KEYBOARD" = "$MORE_LAYOUTS" ]; then
	system-config-keyboard --text
    else
	echo -n "Set keyboard to '$KEYBOARD', please wait ... "
	system-config-keyboard --noui $KEYBOARD >/dev/null 2>&1
	echo "done."
    fi
    echo
fi
 
### update AFS users and SEPP links (only for PSI)
if [ $PSI ] && [ $AFS ]; then
    echo "Update AFS users and SEPP links..."
    [ -x /afs/psi.ch/sys/common/update_user.pl ] && /afs/psi.ch/sys/common/update_user.pl >/dev/null 2>&1 &
    [ -x /afs/psi.ch/sys/common/update_sepp.pl ] && /afs/psi.ch/sys/common/update_sepp.pl >/dev/null 2>&1 &
    echo
fi
 
### create local user, if "nolocal" is not set 
if [ ! $NOLOCAL ]; then
 
    user=$LOCALUSER
    # execute useradd twice, to make it work (don't know why)
    if [ $PSI ] && [ ! $NOADMIN ]; then
	userdel -r $user 2>/dev/null
	useradd -G $LocalAdminGroup $user 2>/dev/null
	userdel -r $user 2>/dev/null
	useradd -G $LocalAdminGroup $user
    else
	userdel -r $user 2>/dev/null
	useradd $user 2>/dev/null
	userdel -r $user 2>/dev/null
	useradd $user
    fi
 
    # only for PSI: change users's group to GID=UID+50000
    if [ $PSI ]; then
	uid=$( id -u $user )
	old_gid=$( id -g $user )
	new_gid=$(( $old_gid + 50000 ))
        # fix /etc/group
	sed -i "s/${user}:x:${old_gid}:/${user}:x:${new_gid}:/" /etc/group
        # fix /etc/passwd
	sed -i "s/${user}:x:${uid}:${old_gid}:/${user}:x:${uid}:${new_gid}:/" /etc/passwd
        # fix perm of /home/${user)
	chgrp -R $user /home/${user}
    fi
fi
 
### copy special files for PSI user l_psi
if [ $PSI ] && [ ! $NOLOCAL ]; then
    find /usr/share/${LOCALUSER}/ -maxdepth 1 -mindepth 1 2>/dev/null | \
    while read dir; do 
	cp -a $dir /home/${LOCALUSER}/
    done
    # set owner
    chown -R ${LOCALUSER}.${LOCALUSER} /home/${LOCALUSER}
fi
 
### autostart kmix and krandrtray in KDE
if [ ! $NOLOCAL ]; then
    mkdir -p /home/${LOCALUSER}/.kde/Autostart
    cp -a /usr/share/applications/kde/krandrtray.desktop /home/${LOCALUSER}/.kde/Autostart 2>/dev/null
    cp -a /usr/share/applications/kde/kmix.desktop /home/${LOCALUSER}/.kde/Autostart 2>/dev/null
    chown -R ${LOCALUSER}.${LOCALUSER} /home/${LOCALUSER}/.kde/Autostart
fi
 
### set password for root and local user
if [ ! $NOPASSWD ]; then
    if [ ! $NOROOT ] || [ ! $NOLOCAL ]; then
	echo -n "Set password for "
	if [ ! $NOROOT ]; then
	    echo -n "'root' "
	fi
	if [ ! $NOROOT ] && [ ! $NOLOCAL ]; then
	    echo -n "and "
	fi
	if [ ! $NOLOCAL ]; then
	    echo -n "local user '$user' "
	fi
	echo
 
	if [ ! $NOLOCAL ]; then
	    echo "Login as local user '$user' with this password."
	    echo
	fi
 
        # set password, if not yet given by $PASSWD
	until [ $PASSWD ]; do
	    echo -n "Password: "
	    read -s PASSWD
	    echo
	done
	if [ ! $NOROOT ]; then
	    echo $PASSWD | passwd --stdin root >/dev/null
	fi
	if [ ! $NOLOCAL ]; then
	    echo $PASSWD | passwd --stdin $user >/dev/null
	fi
	echo
    fi
 
else
    # set root and $LOCALUSER to empty password
    sed -i "s|^root:.*|root::12345:0:99999:1:::|" /etc/shadow
    sed -i "s|^$LOCALUSER:.*|$LOCALUSER::12345:0:99999:1:::|" /etc/shadow
fi
 
### try to get hostname from DNS, if not yet defined
if [ ! $HOSTNAME ]; then
    echo "Try to get hostname from DNS ..."
    IP=$( /sbin/ip add show dev eth0 2>/dev/null | grep "inet " | cut -d" " -f6 | sed 's|/.*||' )
    if [ "$IP" = "" ]; then
	IP=$( /sbin/ip add show dev eth1 2>/dev/null | grep "inet " | cut -d" " -f6 | sed 's|/.*||' )
    fi
    if [ "$IP" != "" ]; then
	host -W 1 $IP >/dev/null 2>&1
	if [ "$?" = "0" ]; then
	    HOSTNAME=$( host -W 1 $IP | cut -d" " -f 5 | cut -d"." -f 1 )
	    if [ "$HOSTNAME" = "3(NXDOMAIN)" ]; then
		HOSTNAME=$DEFAULT_HOSTNAME
	    fi	
	    if [ "$HOSTNAME" = "no" ]; then
		HOSTNAME=$DEFAULT_HOSTNAME
	    fi	
	fi
    fi
fi
 
### define default hostname, if $HOSTNAME still not yet set
if [ ! $HOSTNAME ]; then
    HOSTNAME=$DEFAULT_HOSTNAME
fi
 
### set hostname
export HOSTNAME=$HOSTNAME
hostname $HOSTNAME
sed -i "s/HOSTNAME=.*/HOSTNAME=${HOSTNAME}/" /etc/sysconfig/network
if [ $PSI ]; then
    sed -i "s/hostname=.*/hostname=${HOSTNAME}.psi.ch/" /etc/ssmtp/ssmtp.conf
    sed -i "s/HOSTNAME=.*/HOSTNAME=${HOSTNAME}/" /etc/sysconfig/cfengine
fi
for iface in eth0 eth1 eth2 eth3; do
    if [ -e /etc/sysconfig/network-scripts/ifcfg-${iface} ]; then
	echo "DHCP_HOSTNAME=${HOSTNAME}" >> /etc/sysconfig/network-scripts/ifcfg-${iface}
    fi
done
 
echo "Hostname set to: $HOSTNAME"
echo
 
### set cups server
if [ $CUPS ]; then
    sed -i "s|.*ServerName .*|ServerName  $CUPS|" /etc/cups/client.conf
fi
 
### some magic: just access this file in order that it can be sourced later
ls -lag /etc/X11/xinit/xinitrc-common >/dev/null 2>&1
 
### set keyboard for rdesktop
if [ -e $XORG_CONF ]; then
    grep -q de_CH $XORG_CONF && RDESKTOP_OPT="-k de-ch"
    grep -q fr_CH $XORG_CONF && RDESKTOP_OPT="-k fr-ch"
    grep -q jp106 $XORG_CONF && RDESKTOP_OPT="-k ja"
fi
 
if [ "$RDESKTOP_OPT" ]; then
    echo "alias rdesktop='rdesktop $RDESKTOP_OPT'" > /etc/profile.d/rdesktop.sh
    echo "export RDESKTOP_OPT='$RDESKTOP_OPT'" >> /etc/profile.d/rdesktop.sh
    chmod 755 /etc/profile.d/rdesktop.sh
fi
 
### run setup script, if found in $CONFIG_FOLDER on $FOUND_RESTORE_MNT
if [ -r $CONFIG_FOLDER/setup ]; then
    CONFIG_FOLDER=$CONFIG_FOLDER bash $CONFIG_FOLDER/setup
fi
 
### umount $FOUND_RESTORE_MNT
if [ $FOUND_RESTORE_MNT ]; then
    echo "Unmount $FOUND_RESTORE_MNT"
    umount $FOUND_RESTORE_MNT 2>/dev/null
    sleep 3
fi
 
### local home partition?
if [ $HOMELOCAL ]; then
    mv /home /home.old
    mkdir -p /mnt/home_par
    # which partition? which folder?
    HOMEPAR=$( echo $HOMELOCAL | cut -d":" -f1 )
    HOMEDIR=$( echo $HOMELOCAL | grep ":" | cut -d":" -f2 )
    umount $HOMEPAR 2>/dev/null
    # mount it with option noatime, healthy for USB flash drives
    mount -o noatime -rw $HOMEPAR /mnt/home_par 2>/dev/null
    if [ "$?" != "0" ]; then
	echo "ERROR: Could not mount read/write $HOMEPAR"
	umount $HOMEPAR >/dev/null 2&>1
	mv /home.old /home
    else
	echo "$HOMEPAR mounted on /mnt/home_par"
	# link to new home
	ln -s /mnt/home_par/$HOMEDIR /home
	if [ ! -d /mnt/home_par/$HOMEDIR ]; then
	    echo "$HOMELOCAL not found on $HOMEPAR"
	    echo mkdir -p /mnt/home_par/$HOMEDIR
	    if [ "$?" != "0" ]; then
		echo "ERROR: Could not create $HOMELOCAL on $HOMEPAR"
		umount $HOMEPAR >/dev/null 2&>1
		rm -f /home
		mv /home.old /home
	    else
		echo "Folder $HOMEDIR created on $HOMEPAR"
	    fi
	fi
	if [ -d /mnt/home_par/$HOMEDIR ]; then
	    echo "/home is linked to /mnt/home_par${HOMEDIR}"
	    # copy files from /home.old to /home, which are not yet there
	    /bin/cp -a -i --reply=no /home.old/* /home/ 
	    rm -rf /home.old
	fi
    fi
    sleep 2
fi
 
### mount all if AUTOMOUNT set
if [ $AUTOMOUNT ]; then
    mount -a
fi
 
### unmute all mixers and set volumes
if [ -x /usr/bin/set-volume ]; then 
    if [ $NOSOUND ]; then
	/usr/bin/set-volume 0 > /var/log/set-volume.log 2>&1 &
    else
	/usr/bin/set-volume 60 > /var/log/set-volume.log 2>&1 &
    fi
fi
 
### set kde or gnome as desktop
if [ $KDE ]; then
    sed -i "/^DESKTOP=.*/d" /etc/sysconfig/desktop 2&>/dev/null
    echo "DESKTOP=KDE" >> /etc/sysconfig/desktop
fi
if [ $GNOME ]; then
    sed -i "/^DESKTOP=.*/d" /etc/sysconfig/desktop 2&>/dev/null
    echo "DESKTOP=GNOME" >> /etc/sysconfig/desktop
fi
 
### reload sound module (second time)
reload_soundmodule
 
### bring up all network interfaces (useful to enable WLAN devices)
if [ ! $NONET ]; then
    devices=$( ls /etc/sysconfig/network-scripts/ifcfg-* \
               | sed "s|/etc/sysconfig/network-scripts/ifcfg-||" | grep -v lo )
    for device in $devices; do
	ifconfig $device up > /dev/null 2>&1 &
    done
fi
 

Rev 83	Rev 84
1	`#!/bin/bash`	1	`#!/bin/bash`
2	`#`	2	`#`
3	`# Fix things during bootup - run last`	3	`# Fix things during bootup - run last`
4	`#`	4	`#`
5	`# Urs Beyerle, PSI`	5	`# Urs Beyerle, PSI`
6	`#`	6	`#`
7		7
8	`### -----------------------------------------------------------`	8	`### -----------------------------------------------------------`
9	`### definitions`	9	`### definitions`
10	`### -----------------------------------------------------------`	10	`### -----------------------------------------------------------`
11		11
12	`# dir of mounted live system: /$MOUNTDIR/live`	12	`# dir of mounted live system: /$MOUNTDIR/live`
13	`MOUNTDIR=livecd`	13	`MOUNTDIR=livecd`
14		14
15	`# source functions`	15	`# source functions`
16	`. /$MOUNTDIR/live/liblinuxlive`	16	`. /$MOUNTDIR/live/liblinuxlive`
17	`. /etc/init.d/functions`	17	`. /etc/init.d/functions`
18		18
19	`# defaults for xorg.conf`	19	`# defaults for xorg.conf`
20	`XORG_CONF=/etc/X11/xorg.conf`	20	`XORG_CONF=/etc/X11/xorg.conf`
21		21
22	`HSYNC_DEFAULT="30.0-80.0"`	22	`HSYNC_DEFAULT="30.0-80.0"`
23	`VSYNC_DEFAULT="50.0-90.0"`	23	`VSYNC_DEFAULT="50.0-90.0"`
24	`SCREEN_DEFAULT="1400x1050"`	24	`SCREEN_DEFAULT="1400x1050"`
25		25
26	`MODES_DEFAULT='"2048x1536" "1920x1200" "1600x1200" "1400x1050" "1280x1024" "1280x960" "1280x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"'`	26	`MODES_DEFAULT='"2048x1536" "1920x1200" "1600x1200" "1400x1050" "1280x1024" "1280x960" "1280x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"'`
27		27
28		28
29	`### -----------------------------------------------------------`	29	`### -----------------------------------------------------------`
30	`### Get boot parameters`	30	`### Get boot parameters`
31	`### -----------------------------------------------------------`	31	`### -----------------------------------------------------------`
32		32
33	`# root on NFS?`	33	`# root on NFS?`
34	`NFSROOT=$( cmdline_value nfsroot )`	34	`NFSROOT=$( cmdline_value nfsroot )`
35		35
36	`# NFS Server`	36	`# NFS Server`
37	`NFSSERVER=$( echo $NFSROOT \| cut -d":" -f1 )`	37	`NFSSERVER=$( echo $NFSROOT \| cut -d":" -f1 )`
38		38
39	`# no local user?`	39	`# no local user?`
40	`NOLOCAL=$( cmdline_parameter nolocal )`	40	`NOLOCAL=$( cmdline_parameter nolocal )`
41		41
42	`# no root user?`	42	`# no root user?`
43	`NOROOT=$( cmdline_parameter noroot )`	43	`NOROOT=$( cmdline_parameter noroot )`
44		44
45	`# no localadmin?`	45	`# no localadmin?`
46	`NOADMIN=$( cmdline_parameter noadmin )`	46	`NOADMIN=$( cmdline_parameter noadmin )`
47	`LocalAdminGroup=localadmin`	47	`LocalAdminGroup=localadmin`
48		48
49	`# set password`	49	`# set password`
50	`PASSWD=$( cmdline_value passwd )`	50	`PASSWD=$( cmdline_value passwd )`
51	`[ ! $PASSWD ] && PASSWD=$( cmdline_value pw )`	51	`[ ! $PASSWD ] && PASSWD=$( cmdline_value pw )`
52		52
53	`# no password = empty password ?`	53	`# no password = empty password ?`
54	`NOPASSWD=$( cmdline_parameter nopasswd )`	54	`NOPASSWD=$( cmdline_parameter nopasswd )`
55		55
56	`# keyboard layout (kb= or keyboard=)`	56	`# keyboard layout (kb= or keyboard=)`
57	`KEYBOARD=$( cmdline_value keyboard )`	57	`KEYBOARD=$( cmdline_value keyboard )`
58	`KB=$( cmdline_value kb )`	58	`KB=$( cmdline_value kb )`
59		59
60	`# PSI setup?`	60	`# PSI setup?`
61	`PSI=$( cmdline_parameter psi )`	61	`PSI=$( cmdline_parameter psi )`
62		62
63	`# cups server`	63	`# cups server`
64	`CUPS=$( cmdline_value cups )`	64	`CUPS=$( cmdline_value cups )`
65		65
66	`# failsafe X server`	66	`# failsafe X server`
67	`SIMPLEX=$( cmdline_parameter simplex )`	67	`SIMPLEX=$( cmdline_parameter simplex )`
68		68
69	`# NVIDIA driver`	69	`# NVIDIA driver`
70	`NVIDIA=$( cmdline_parameter nvidia )`	70	`NVIDIA=$( cmdline_parameter nvidia )`
71	`if [ "$XDRIVER" = "nvidia" ]; then`	71	`if [ "$XDRIVER" = "nvidia" ]; then`
72	`NVIDIA=nvidia`	72	`NVIDIA=nvidia`
73	`fi`	73	`fi`
74		74
75	`# force NO NVIDIA driver - will overwite NVIDIA option`	75	`# force NO NVIDIA driver - will overwite NVIDIA option`
76	`NONVIDIA=$( cmdline_parameter nonvidia )`	76	`NONVIDIA=$( cmdline_parameter nonvidia )`
77		77
78	`# VESA driver`	78	`# VESA driver`
79	`VESA=$( cmdline_parameter vesa )`	79	`VESA=$( cmdline_parameter vesa )`
80		80
81	`# force to use a video driver ?`	81	`# force to use a video driver ?`
82	`XDRIVER=$( cmdline_value xdriver )`	82	`XDRIVER=$( cmdline_value xdriver )`
83		83
84	`# Xserver configurations`	84	`# Xserver configurations`
85	`HSYNC=$( cmdline_value hsync )`	85	`HSYNC=$( cmdline_value hsync )`
86	`VSYNC=$( cmdline_value vsync )`	86	`VSYNC=$( cmdline_value vsync )`
87	`SCREEN=$( cmdline_value screen )`	87	`SCREEN=$( cmdline_value screen )`
88		88
89	`# no SWAP`	89	`# no SWAP`
90	`NOSWAP=$( cmdline_parameter noswap )`	90	`NOSWAP=$( cmdline_parameter noswap )`
91		91
92	`# should we auto mount all found devices?`	92	`# should we auto mount all found devices?`
93	`AUTOMOUNT=$( cmdline_parameter automount )`	93	`AUTOMOUNT=$( cmdline_parameter automount )`
94	`if [ $AUTOMOUNT ]; then`	94	`if [ $AUTOMOUNT ]; then`
95	`MOUNTOPT="auto,users"`	95	`MOUNTOPT="auto,users"`
96	`else`	96	`else`
97	`MOUNTOPT="noauto,users,ro"`	97	`MOUNTOPT="noauto,users,ro"`
98	`fi`	98	`fi`
99		99
100	`# folder where we find data which was previously stored`	100	`# folder where we find data which was previously stored`
101	`# (normally on a usbstick, but can be partition)`	101	`# (normally on a usbstick, but can be partition)`
102	`if [ $PSI ]; then`	102	`if [ $PSI ]; then`
103	`SAVEFOLDER=PSI_LIVECD`	103	`SAVEFOLDER=PSI_LIVECD`
104	`else`	104	`else`
105	`SAVEFOLDER=SL_LIVECD`	105	`SAVEFOLDER=SL_LIVECD`
106	`fi`	106	`fi`
107		107
108	`# local home partition?`	108	`# local home partition?`
109	`# (e.g. /dev/hda1, /dev/hda1:/my_home)`	109	`# (e.g. /dev/hda1, /dev/hda1:/my_home)`
110	`HOMELOCAL=$( cmdline_value home )`	110	`HOMELOCAL=$( cmdline_value home )`
111		111
112	`# fast booting ?`	112	`# fast booting ?`
113	`FASTBOOT=$( cmdline_parameter fastboot )`	113	`FASTBOOT=$( cmdline_parameter fastboot )`
114		114
115	`# start afs?`	115	`# start afs?`
116	`AFS=$( cmdline_parameter afs )`	116	`AFS=$( cmdline_parameter afs )`
117		117
118	`# or force no afs`	118	`# or force no afs`
119	`[ $( cmdline_parameter noafs ) ] && AFS=""`	119	`[ $( cmdline_parameter noafs ) ] && AFS=""`
120		120
121	`# turn of sound (volume=0)`	121	`# turn of sound (volume=0)`
122	`NOSOUND=$( cmdline_parameter nosound )`	122	`NOSOUND=$( cmdline_parameter nosound )`
123		123
124	`# local user name?`	124	`# local user name?`
125	`LOCALUSER=$( cmdline_value user )`	125	`LOCALUSER=$( cmdline_value user )`
126		126
127	`# hostname?`	127	`# hostname?`
128	`HOSTNAME=$( cmdline_value hostname )`	128	`HOSTNAME=$( cmdline_value hostname )`
129		129
130	`# do we have defined a configuration directory?`	130	`# do we have defined a configuration directory?`
131	`CONFIG=$( cmdline_value config )`	131	`CONFIG=$( cmdline_value config )`
132		132
133	`# do not udpate fstab?`	133	`# do not udpate fstab?`
134	`NOFSTAB=$( cmdline_parameter nofstab )`	134	`NOFSTAB=$( cmdline_parameter nofstab )`
135		135
136	`# kde/gnome as desktop`	136	`# kde/gnome as desktop`
137	`GNOME=$( cmdline_parameter gnome )`	137	`GNOME=$( cmdline_parameter gnome )`
138	`KDE=$( cmdline_parameter kde )`	138	`KDE=$( cmdline_parameter kde )`
139		139
140	`# do no fixes (useful for debugging)`	140	`# do no fixes (useful for debugging)`
141	`NOFIX=$( cmdline_parameter nofix )`	141	`NOFIX=$( cmdline_parameter nofix )`
142		142
143	`# do not start network`	143	`# do not start network`
144	`NONET=$( cmdline_parameter nonet )`	144	`NONET=$( cmdline_parameter nonet )`
145		145
146		146
147		147
148	`### -----------------------------------------------------------`	148	`### -----------------------------------------------------------`
149	`### Functions`	149	`### Functions`
150	`### -----------------------------------------------------------`	150	`### -----------------------------------------------------------`
151		151
152	`reload_soundmodule() {`	152	`reload_soundmodule() {`
153		153
154	`### unload/load sound module for snd-card-X (timing problem?)`	154	`### unload/load sound module for snd-card-X (timing problem?)`
155	`if [ ! $NOFIX ]; then`	155	`if [ ! $NOFIX ]; then`
156	`rpm -q alsa-lib \| grep el5 >/dev/null`	156	`rpm -q alsa-lib \| grep el5 >/dev/null`
157	`if [ "$?" = "0" ]; then`	157	`if [ "$?" = "0" ]; then`
158	`# disable kernel messages`	158	`# disable kernel messages`
159	`echo "0" > /proc/sys/kernel/printk`	159	`echo "0" > /proc/sys/kernel/printk`
160	`sound_modules=$( grep snd-card- /etc/modprobe.conf \| awk ' $1 ~ /alias/ { print $3 }' \| tr - _ )`	160	`sound_modules=$( grep snd-card- /etc/modprobe.conf \| awk ' $1 ~ /alias/ { print $3 }' \| tr - _ )`
161	`for module in $sound_modules; do`	161	`for module in $sound_modules; do`
162	`lsmod \| awk '{ print $1 }' \| grep $module >/dev/null 2>&1`	162	`lsmod \| awk '{ print $1 }' \| grep $module >/dev/null 2>&1`
163	`if [ "$?" = "0" ]; then`	163	`if [ "$?" = "0" ]; then`
164	`rmmod $module >/dev/null 2>&1`	164	`rmmod $module >/dev/null 2>&1`
165	`modprobe $module >/dev/null 2>&1`	165	`modprobe $module >/dev/null 2>&1`
166	`fi`	166	`fi`
167	`done`	167	`done`
168	`# enable kernel messages`	168	`# enable kernel messages`
169	`echo "6" > /proc/sys/kernel/printk`	169	`echo "6" > /proc/sys/kernel/printk`
170	`fi`	170	`fi`
171	`fi`	171	`fi`
172	`}`	172	`}`
173		173
174		174
175	`### -----------------------------------------------------------`	175	`### -----------------------------------------------------------`
176	`### Improved hardware detection`	176	`### Improved hardware detection`
177	`### -----------------------------------------------------------`	177	`### -----------------------------------------------------------`
178		178
179	`### Improved graphic card detection`	179	`### Improved graphic card detection`
180		180
181	`if [ ! $SIMPLEX ] && [ ! $NOFIX ]; then`	181	`if [ ! $SIMPLEX ] && [ ! $NOFIX ]; then`
182		182
183	`### Intel Mobile 945GM`	-
184	`lspci \| grep -q VGA.Intel.Mobile.*945GM`	-
185	`if [ "$?" = "0" ]; then`	-
186	`I945GM=i945gm`	-
187	`## not yet supported by i810 driver`	-
188	`## [ $XDRIVER ] \|\| XDRIVER=i810`	-
189	`I915RESOLUTION=on`	-
190	`fi`	-
191	`### Intel Mobile 915GM`	183	`### Intel Mobile 915GM`
192	`lspci \| grep -q VGA.Intel.Mobile.*915GM`	184	`lspci \| grep -q VGA.Intel.Mobile.*915GM`
193	`if [ "$?" = "0" ]; then`	185	`if [ "$?" = "0" ]; then`
194	`I915GM=i915gm`	186	`I915GM=i915gm`
195	`[ $XDRIVER ] \|\| XDRIVER=i810`	187	`[ $XDRIVER ] \|\| XDRIVER=i810`
196	`I855RESOLUTION=on`	188	`I855RESOLUTION=on`
197	`fi`	189	`fi`
198		190
199	`### Intel Mobile 855GM`	191	`### Intel Mobile 855GM`
200	`lspci \| grep -q VGA.Intel.855GM`	192	`lspci \| grep -q VGA.Intel.855GM`
201	`if [ "$?" = "0" ]; then`	193	`if [ "$?" = "0" ]; then`
202	`I855GM=i855gm`	194	`I855GM=i855gm`
203	`I855RESOLUTION=on`	195	`I855RESOLUTION=on`
204	`fi`	196	`fi`
205	`fi`	197	`fi`
206		198
207		199
208	`### -----------------------------------------------------------`	200	`### -----------------------------------------------------------`
209	`### Main`	201	`### Main`
210	`### -----------------------------------------------------------`	202	`### -----------------------------------------------------------`
211		203
212	`### try load fuse kernel module`	204	`### try load fuse kernel module`
213	`modprobe fuse 2>/dev/null`	205	`modprobe fuse 2>/dev/null`
214		206
215	`### reload sound module (first time)`	207	`### reload sound module (first time)`
216	`reload_soundmodule`	208	`reload_soundmodule`
217		209
218	`### activate SWAP`	210	`### activate SWAP`
219	`# delete all swap lines in fstab`	211	`# delete all swap lines in fstab`
220	`sed -i -e "/ swap /d" /etc/fstab`	212	`sed -i -e "/ swap /d" /etc/fstab`
221	`# search for swap partition`	213	`# search for swap partition`
222	`fdisk -l > /var/log/fdisk`	214	`fdisk -l > /var/log/fdisk`
223	`swap_part=$( fdisk -l 2>/dev/null \| grep -i "Linux swap" \`	215	`swap_part=$( fdisk -l 2>/dev/null \| grep -i "Linux swap" \`
224	`\| grep "^/dev/" \| cut -f 1 -d " " \| head -1 )`	216	`\| grep "^/dev/" \| cut -f 1 -d " " \| head -1 )`
225	`# add to /etc/fstab and activate SWAP`	217	`# add to /etc/fstab and activate SWAP`
226	`if [ $swap_part ] && [ ! $NOSWAP ]; then`	218	`if [ $swap_part ] && [ ! $NOSWAP ]; then`
227	`echo "$swap_part swap swap defaults 0 0" >>/etc/fstab`	219	`echo "$swap_part swap swap defaults 0 0" >>/etc/fstab`
228	`# activate SWAP`	220	`# activate SWAP`
229	`swapoff -a`	221	`swapoff -a`
230	`swapon -a -e`	222	`swapon -a -e`
231	`fi`	223	`fi`
232		224
233	`### MAC Address of eth0`	225	`### MAC Address of eth0`
234	`MAC_ETH0=$( ifconfig \| grep eth0 \| awk '{print $5}' )`	226	`MAC_ETH0=$( ifconfig \| grep eth0 \| awk '{print $5}' )`
235		227
236	`### Get CONFIG_FOLDER for this machine from NFS Server (if existing)`	228	`### Get CONFIG_FOLDER for this machine from NFS Server (if existing)`
237	`# and copy it to /$MOUNTDIR`	229	`# and copy it to /$MOUNTDIR`
238	`if [ $NFSSERVER ] && [ $CONFIG ]; then`	230	`if [ $NFSSERVER ] && [ $CONFIG ]; then`
239	`mkdir -p /mnt/config`	231	`mkdir -p /mnt/config`
240	`echo "Search for configuration files on the server ..."`	232	`echo "Search for configuration files on the server ..."`
241	`/etc/init.d/portmap start >/dev/null`	233	`/etc/init.d/portmap start >/dev/null`
242	`mount -t nfs $NFSSERVER:$CONFIG /mnt/config 2>/dev/null`	234	`mount -t nfs $NFSSERVER:$CONFIG /mnt/config 2>/dev/null`
243	`if [ "$?" != "0" ]; then`	235	`if [ "$?" != "0" ]; then`
244	`echo "Could not mount $NFSSERVER:$CONFIG."`	236	`echo "Could not mount $NFSSERVER:$CONFIG."`
245	`else`	237	`else`
246	`if [ -d /mnt/config/$MAC_ETH0 ]; then`	238	`if [ -d /mnt/config/$MAC_ETH0 ]; then`
247	`CONFIG_FOLDER=/$MOUNTDIR/config`	239	`CONFIG_FOLDER=/$MOUNTDIR/config`
248	`mkdir -p $CONFIG_FOLDER`	240	`mkdir -p $CONFIG_FOLDER`
249	`cp -a /mnt/config/$MAC_ETH0/* /$CONFIG_FOLDER/ 2>/dev/null`	241	`cp -a /mnt/config/$MAC_ETH0/* /$CONFIG_FOLDER/ 2>/dev/null`
250	`if [ "$?" != "0" ]; then`	242	`if [ "$?" != "0" ]; then`
251	`echo "Could not get $NFSSERVER:$CONFIG/$MAC_ETH0"`	243	`echo "Could not get $NFSSERVER:$CONFIG/$MAC_ETH0"`
252	`CONFIG_FOLDER=""`	244	`CONFIG_FOLDER=""`
253	`else`	245	`else`
254	`echo "Found configuration files on the server."`	246	`echo "Found configuration files on the server."`
255	`fi`	247	`fi`
256	`fi`	248	`fi`
257	`umount /mnt/config`	249	`umount /mnt/config`
258	`fi`	250	`fi`
259	`/etc/init.d/portmap stop >/dev/null`	251	`/etc/init.d/portmap stop >/dev/null`
260	`fi`	252	`fi`
261		253
262	`### search for partitions and update fstab`	254	`### search for partitions and update fstab`
263	`### and look for $SAVEFOLDER (previously stored data)`	255	`### and look for $SAVEFOLDER (previously stored data)`
264	`if [ ! $FASTBOOT ] && [ ! $NOFSTAB ]; then`	256	`if [ ! $FASTBOOT ] && [ ! $NOFSTAB ]; then`
265	`echo "Update /etc/fstab ..."`	257	`echo "Update /etc/fstab ..."`
266	`# disable kernel messages during mount/unmount`	258	`# disable kernel messages during mount/unmount`
267	`echo 0 > /proc/sys/kernel/printk`	259	`echo 0 > /proc/sys/kernel/printk`
268	`DEVICES=$( list_partition_devices )`	260	`DEVICES=$( list_partition_devices )`
269	`for DEVICE in $DEVICES; do`	261	`for DEVICE in $DEVICES; do`
270	`# try to mount the device and unmount it.`	262	`# try to mount the device and unmount it.`
271	`# If OK, we can add it to fstab`	263	`# If OK, we can add it to fstab`
272	`DEV=$( echo $DEVICE \| cut -d"/" -f 3 )`	264	`DEV=$( echo $DEVICE \| cut -d"/" -f 3 )`
273	`if [ $DEV ]; then`	265	`if [ $DEV ]; then`
274	`mkdir -p /mnt/$DEV`	266	`mkdir -p /mnt/$DEV`
275	`mount $DEVICE /mnt/$DEV >/dev/null 2>&1`	267	`mount $DEVICE /mnt/$DEV >/dev/null 2>&1`
276	`# search for $SAVEFOLDER`	268	`# search for $SAVEFOLDER`
277	`if [ -d /mnt/$DEV/$SAVEFOLDER ]; then`	269	`if [ -d /mnt/$DEV/$SAVEFOLDER ]; then`
278	`FOUND_RESTORE_DEV=/dev/$DEV`	270	`FOUND_RESTORE_DEV=/dev/$DEV`
279	`echo "Found folder '$SAVEFOLDER' on $FOUND_RESTORE_DEV"`	271	`echo "Found folder '$SAVEFOLDER' on $FOUND_RESTORE_DEV"`
280	`fi`	272	`fi`
281	`# unmount again`	273	`# unmount again`
282	`umount /mnt/$DEV >/dev/null 2>&1`	274	`umount /mnt/$DEV >/dev/null 2>&1`
283	`# if sucsessful add to fstab, if not already done`	275	`# if sucsessful add to fstab, if not already done`
284	`if [ "$?" = "0" ]; then`	276	`if [ "$?" = "0" ]; then`
285	`grep -q "^$DEVICE " /etc/fstab`	277	`grep -q "^$DEVICE " /etc/fstab`
286	`if [ "$?" != "0" ]; then`	278	`if [ "$?" != "0" ]; then`
287	`echo -e "$DEVICE \t /mnt/$DEV \t auto \t $MOUNTOPT,suid,dev,exec 0 0" >> /etc/fstab`	279	`echo -e "$DEVICE \t /mnt/$DEV \t auto \t $MOUNTOPT,suid,dev,exec 0 0" >> /etc/fstab`
288	`fi`	280	`fi`
289	`else`	281	`else`
290	`rmdir /mnt/$DEV 2>/dev/null`	282	`rmdir /mnt/$DEV 2>/dev/null`
291	`fi`	283	`fi`
292	`fi`	284	`fi`
293	`done`	285	`done`
294	`# enable kernel messages again`	286	`# enable kernel messages again`
295	`echo 6 > /proc/sys/kernel/printk`	287	`echo 6 > /proc/sys/kernel/printk`
296	`fi`	288	`fi`
297		289
298	`### if $SAVEFOLDER found, set $CONFIG_FOLDER and mount $FOUND_RESTORE_MNT`	290	`### if $SAVEFOLDER found, set $CONFIG_FOLDER and mount $FOUND_RESTORE_MNT`
299	`if [ $FOUND_RESTORE_DEV ]; then`	291	`if [ $FOUND_RESTORE_DEV ]; then`
300	`FOUND_RESTORE_MNT=$( grep "^$FOUND_RESTORE_DEV " /etc/fstab \| awk '{ print $2 }' )`	292	`FOUND_RESTORE_MNT=$( grep "^$FOUND_RESTORE_DEV " /etc/fstab \| awk '{ print $2 }' )`
301	`CONFIG_FOLDER=$FOUND_RESTORE_MNT/$SAVEFOLDER`	293	`CONFIG_FOLDER=$FOUND_RESTORE_MNT/$SAVEFOLDER`
302	`echo "Will restore data from $CONFIG_FOLDER"`	294	`echo "Will restore data from $CONFIG_FOLDER"`
303	`mount $FOUND_RESTORE_MNT`	295	`mount $FOUND_RESTORE_MNT`
304	`fi`	296	`fi`
305		297
306	`### source the file "config", if found in $CONFIG_FOLDER`	298	`### source the file "config", if found in $CONFIG_FOLDER`
307	`if [ -f $CONFIG_FOLDER/config ]; then`	299	`if [ -f $CONFIG_FOLDER/config ]; then`
308	`. $CONFIG_FOLDER/config`	300	`. $CONFIG_FOLDER/config`
309	`fi`	301	`fi`
310		302
311	`### do we have a shadow/passwd file in $FOUND_FOULDER`	303	`### do we have a shadow/passwd file in $FOUND_FOULDER`
312	`if [ -r $CONFIG_FOLDER/passwd.tar.gz ] && [ -r $CONFIG_FOLDER/shadow.tar.gz ]; then`	304	`if [ -r $CONFIG_FOLDER/passwd.tar.gz ] && [ -r $CONFIG_FOLDER/shadow.tar.gz ]; then`
313	`# we do not need a password for local user and root`	305	`# we do not need a password for local user and root`
314	`NOLOCAL=nolocal`	306	`NOLOCAL=nolocal`
315	`NOROOT=noroot`	307	`NOROOT=noroot`
316	`fi`	308	`fi`
317		309
318	`### set local user name and default hostname`	310	`### set local user name and default hostname`
319	`if [ $PSI ]; then`	311	`if [ $PSI ]; then`
320	`[ $LOCALUSER ] \|\| LOCALUSER=l_psi`	312	`[ $LOCALUSER ] \|\| LOCALUSER=l_psi`
321	`DEFAULT_HOSTNAME=psi`	313	`DEFAULT_HOSTNAME=psi`
322	`else`	314	`else`
323	`[ $LOCALUSER ] \|\| LOCALUSER=sluser`	315	`[ $LOCALUSER ] \|\| LOCALUSER=sluser`
324	`DEFAULT_HOSTNAME=slinux`	316	`DEFAULT_HOSTNAME=slinux`
325	`fi`	317	`fi`
326		318
327	`### start 855resolution?`	319	`### start 855resolution?`
328	`[ $I855RESOLUTION ] && /etc/init.d/855resolution start 2>/dev/null`	320	`[ $I855RESOLUTION ] && /etc/init.d/855resolution start 2>/dev/null`
329		321
330	`### start 915resolution?`	-
331	`[ $I915RESOLUTION ] && /etc/init.d/915resolution start 2>/dev/null`	-
332		322
333	`### configure Xserver`	323	`### configure Xserver`
334		324
335	`### check for xorg.conf in CONFIG_FOLDER`	325	`### check for xorg.conf in CONFIG_FOLDER`
336	`if [ -r $CONFIG_FOLDER/xorg.conf ]; then`	326	`if [ -r $CONFIG_FOLDER/xorg.conf ]; then`
337	`cp -af $CONFIG_FOLDER/xorg.conf $XORG_CONF`	327	`cp -af $CONFIG_FOLDER/xorg.conf $XORG_CONF`
338	`if [ "$?" = "0" ]; then`	328	`if [ "$?" = "0" ]; then`
339	`echo "Saved xorg.conf file found."`	329	`echo "Saved xorg.conf file found."`
340	`XDRIVER=""`	330	`XDRIVER=""`
341	`HAVE_XORG_CONF="yes"`	331	`HAVE_XORG_CONF="yes"`
342	`fi`	332	`fi`
343	`fi`	333	`fi`
344		334
345	`### use vesa driver?`	335	`### use vesa driver?`
346	`if [ $VESA ]; then`	336	`if [ $VESA ]; then`
347	`echo "Force to use VESA driver!"`	337	`echo "Force to use VESA driver!"`
348	`video_driver="--set-driver=vesa"`	338	`video_driver="--set-driver=vesa"`
349	`else`	339	`else`
350	`video_driver=""`	340	`video_driver=""`
351	`fi`	341	`fi`
352		342
353	`### force an other video driver?`	343	`### force an other video driver?`
354	`if [ $XDRIVER ]; then`	344	`if [ $XDRIVER ]; then`
355	`echo "Force to use $XDRIVER driver!"`	345	`echo "Force to use $XDRIVER driver!"`
356	`video_driver="--set-driver=$XDRIVER"`	346	`video_driver="--set-driver=$XDRIVER"`
357	`fi`	347	`fi`
358		348
359	`### configure Xserver`	349	`### configure Xserver`
360	`if [ -x /usr/bin/system-config-display ]; then`	350	`if [ -x /usr/bin/system-config-display ]; then`
361	`echo "Configure Xserver:"`	351	`echo "Configure Xserver:"`
362	`if [ ! $HAVE_XORG_CONF ]; then`	352	`if [ ! $HAVE_XORG_CONF ]; then`
363	`if [ ! $SIMPLEX ]; then`	353	`if [ ! $SIMPLEX ]; then`
364		354
365	`# default values`	355	`# default values`
366	`[ ! $HSYNC ] && HSYNC="$HSYNC_DEFAULT"`	356	`[ ! $HSYNC ] && HSYNC="$HSYNC_DEFAULT"`
367	`[ ! $VSYNC ] && VSYNC="$VSYNC_DEFAULT"`	357	`[ ! $VSYNC ] && VSYNC="$VSYNC_DEFAULT"`
368	`[ ! $SCREEN ] && SCREEN="$SCREEN_DEFAULT"`	358	`[ ! $SCREEN ] && SCREEN="$SCREEN_DEFAULT"`
369		359
370	`# run system-config-display`	360	`# run system-config-display`
371	`system-config-display \`	361	`system-config-display \`
372	`--reconfig \`	362	`--reconfig \`
373	`-v \`	363	`-v \`
374	`--set-resolution=$SCREEN \`	364	`--set-resolution=$SCREEN \`
375	`--set-hsync=$HSYNC \`	365	`--set-hsync=$HSYNC \`
376	`--set-vsync=$VSYNC \`	366	`--set-vsync=$VSYNC \`
377	`$video_driver \| grep Trying`	367	`$video_driver \| grep Trying`
378		368
379	`# system-config-display in SL5 does not work nicely :-(`	369	`# system-config-display in SL5 does not work nicely :-(`
380	`# e.g. No Monitor Section`	370	`# e.g. No Monitor Section`
381		371
382	`# add Monitor Section and add Monitor0 to Screen Section`	372	`# add Monitor Section and add Monitor0 to Screen Section`
383	`grep -q Monitor $XORG_CONF`	373	`grep -q Monitor $XORG_CONF`
384	`if [ "$?" != "0" ]; then`	374	`if [ "$?" != "0" ]; then`
385	`echo "Section \"Monitor\"" >> $XORG_CONF`	375	`echo "Section \"Monitor\"" >> $XORG_CONF`
386	`echo -e "\tIdentifier \"Monitor0\"" >> $XORG_CONF`	376	`echo -e "\tIdentifier \"Monitor0\"" >> $XORG_CONF`
387	`echo -e "\tHorizSync $HSYNC" >> $XORG_CONF`	377	`echo -e "\tHorizSync $HSYNC" >> $XORG_CONF`
388	`echo -e "\tVertRefresh $VSYNC" >> $XORG_CONF`	378	`echo -e "\tVertRefresh $VSYNC" >> $XORG_CONF`
389	`echo -e "\tOption \"dpms\"" >> $XORG_CONF`	379	`echo -e "\tOption \"dpms\"" >> $XORG_CONF`
390	`echo -e "EndSection" >> $XORG_CONF`	380	`echo -e "EndSection" >> $XORG_CONF`
391	`sed -i "s\|Device \"Videocard0\"\|Device \"Videocard0\"\n\tMonitor \"Monitor0\"\|" $XORG_CONF`	381	`sed -i "s\|Device \"Videocard0\"\|Device \"Videocard0\"\n\tMonitor \"Monitor0\"\|" $XORG_CONF`
392	`fi`	382	`fi`
393		383
394	`# add Modes for $SCREEN, if not yet there`	384	`# add Modes for $SCREEN, if not yet there`
395	`grep -q Modes $XORG_CONF`	385	`grep -q Modes $XORG_CONF`
396	`if [ "$?" != "0" ]; then`	386	`if [ "$?" != "0" ]; then`
397	`modeline=$( echo ${MODES_DEFAULT} \| sed "s\|.*\"$SCREEN\|\"$SCREEN\|" )`	387	`modeline=$( echo ${MODES_DEFAULT} \| sed "s\|.*\"$SCREEN\|\"$SCREEN\|" )`
398	`if [ "$modeline" ]; then`	388	`if [ "$modeline" ]; then`
399	`sed -i "s\|\tDepth.*\|\tDepth 24\n\t\tModes $modeline\|" $XORG_CONF`	389	`sed -i "s\|\tDepth.*\|\tDepth 24\n\t\tModes $modeline\|" $XORG_CONF`
400	`fi`	390	`fi`
401	`fi`	391	`fi`
402		392
403		393
404	`# simple Xserver configuration.`	394	`# simple Xserver configuration.`
405	`else`	395	`else`
406	`echo "Use simple Xserver configuration."`	396	`echo "Use simple Xserver configuration."`
407	`system-config-display --noui --reconfig -v \| grep Trying`	397	`system-config-display --noui --reconfig -v \| grep Trying`
408	`fi`	398	`fi`
409	`fi`	399	`fi`
410	`fi`	400	`fi`
411		401
412		402
413	`### enable NVIDIA driver (needs nvidia, nvidia-libs rpms)`	403	`### enable NVIDIA driver (needs nvidia, nvidia-libs rpms)`
414	`if [ $NVIDIA ] && [ ! $NONVIDIA ]; then`	404	`if [ $NVIDIA ] && [ ! $NONVIDIA ]; then`
415	`# serach for Nvidia Video Card`	405	`# serach for Nvidia Video Card`
416	`/sbin/lspci \| grep VGA \| grep -i -q nvidia`	406	`/sbin/lspci \| grep VGA \| grep -i -q nvidia`
417	`if [ "$?" = "0" ]; then`	407	`if [ "$?" = "0" ]; then`
418	`# lib or lib64 ?`	408	`# lib or lib64 ?`
419	`LIB=lib`	409	`LIB=lib`
420	`[ $( arch ) = "x86_64" ] && LIB=lib64`	410	`[ $( arch ) = "x86_64" ] && LIB=lib64`
421	`# find out installed Nvidia driver version`	411	`# find out installed Nvidia driver version`
422	`libglx=$( ls /usr/X11R6/$LIB/modules/extensions/libglx.so.1.* \| head -n 1 )`	412	`libglx=$( ls /usr/X11R6/$LIB/modules/extensions/libglx.so.1.* \| head -n 1 )`
423	`nvidia_version=${libglx##*.so.1.}`	413	`nvidia_version=${libglx##*.so.1.}`
424	`# enable Nvidia driver (normally done by nvidia-enable - does not work on LiveCD)`	414	`# enable Nvidia driver (normally done by nvidia-enable - does not work on LiveCD)`
425	`echo -n "NVIDIA graphic card found. Enable the nvidia driver ${nvidia_version} ... "`	415	`echo -n "NVIDIA graphic card found. Enable the nvidia driver ${nvidia_version} ... "`
426	`NVLOG=/var/log/nvidia.log`	416	`NVLOG=/var/log/nvidia.log`
427	`# assuming that the kernel modules are already build`	417	`# assuming that the kernel modules are already build`
428	`# link to Nvidia libs`	418	`# link to Nvidia libs`
429	`ln -sf ../../usr/X11R6/$LIB/libGL.so.1.${nvidia_version} /usr/$LIB/libGL.so`	419	`ln -sf ../../usr/X11R6/$LIB/libGL.so.1.${nvidia_version} /usr/$LIB/libGL.so`
430	`ln -sf libGL.so.1.${nvidia_version} /usr/X11R6/$LIB/libGL.so`	420	`ln -sf libGL.so.1.${nvidia_version} /usr/X11R6/$LIB/libGL.so`
431	`mv /usr/X11R6/$LIB/modules/extensions/libGLcore.a /usr/X11R6/$LIB/modules/extensions/xxx.libGLcore.a.saved_by_nvidia`	421	`mv /usr/X11R6/$LIB/modules/extensions/libGLcore.a /usr/X11R6/$LIB/modules/extensions/xxx.libGLcore.a.saved_by_nvidia`
432	`mv /usr/X11R6/$LIB/modules/extensions/libglx.a /usr/X11R6/$LIB/modules/extensions/xxx.libglx.a.saved_by_nvidia`	422	`mv /usr/X11R6/$LIB/modules/extensions/libglx.a /usr/X11R6/$LIB/modules/extensions/xxx.libglx.a.saved_by_nvidia`
433	`ln -sf libglx.so.1.${nvidia_version} /usr/X11R6/$LIB/modules/extensions/libglx.so`	423	`ln -sf libglx.so.1.${nvidia_version} /usr/X11R6/$LIB/modules/extensions/libglx.so`
434	`# reconfigure X`	424	`# reconfigure X`
435	`/usr/sbin/nvidia-xconfig >> $NVLOG 2>&1`	425	`/usr/sbin/nvidia-xconfig >> $NVLOG 2>&1`
436	`if [ $PSI ]; then`	426	`if [ $PSI ]; then`
437	`echo 'NVIDIA=on' >> /etc/sysconfig/cfengine`	427	`echo 'NVIDIA=on' >> /etc/sysconfig/cfengine`
438	`fi`	428	`fi`
439	`echo "ok."`	429	`echo "ok."`
440	`fi`	430	`fi`
441	`fi`	431	`fi`
442		432
443	`### set special video driver options for Intel Mobile`	433	`### set special video driver options for Intel Mobile`
444		434
445	`# (external VGA output: Clone)`	435	`# (external VGA output: Clone)`
446	`if [ $I915GM ] \|\| [ $I855GM ]; then`	436	`if [ $I915GM ] \|\| [ $I855GM ]; then`
447	`sed -e "/Section[ \t]*\"Device\"/,/EndSection/{`	437	`sed -e "/Section[ \t]*\"Device\"/,/EndSection/{`
448	`/^[ \t]Option[ \t]\"MonitorLayout\"/d`	438	`/^[ \t]Option[ \t]\"MonitorLayout\"/d`
449	`/^[ \t]Option[ \t]\"Clone/d`	439	`/^[ \t]Option[ \t]\"Clone/d`
450	`/EndSection/i\\`	440	`/EndSection/i\\`
451	`Option \"MonitorLayout\" \"CRT,LFP\"\\`	441	`Option \"MonitorLayout\" \"CRT,LFP\"\\`
452	`Option \"Clone\" \"1\"\\`	442	`Option \"Clone\" \"1\"\\`
453	`Option \"CloneRefresh\" \"60\"`	443	`Option \"CloneRefresh\" \"60\"`
454	`}" -i $XORG_CONF`	444	`}" -i $XORG_CONF`
455	`fi`	445	`fi`
456		446
457	`# Set BoardName for Intel 915GM`	447	`# Set BoardName for Intel 915GM`
458	`if [ $I915GM ]; then`	448	`if [ $I915GM ]; then`
459	`sed -i 's/BoardName.VESA driver./BoardName "Intel 915"/' $XORG_CONF`	449	`sed -i 's/BoardName.VESA driver./BoardName "Intel 915"/' $XORG_CONF`
460	`fi`	450	`fi`
461		451
462		452
463	`### parameter KB = KEYBOARD`	453	`### parameter KB = KEYBOARD`
464	`KEYBOARD=$KB`	454	`KEYBOARD=$KB`
465		455
466	`### ask user for keyboard layout if no keyboard given`	456	`### ask user for keyboard layout if no keyboard given`
467	`if [ -x /usr/bin/system-config-keyboard ]; then`	457	`if [ -x /usr/bin/system-config-keyboard ]; then`
468	`if [ ! $KEYBOARD ]; then`	458	`if [ ! $KEYBOARD ]; then`
469	`MORE_LAYOUTS="more..."`	459	`MORE_LAYOUTS="more..."`
470	`keytables="U.S...........(us) \`	460	`keytables="U.S...........(us) \`
471	`Swiss-German..(sg-latin1) \`	461	`Swiss-German..(sg-latin1) \`
472	`Swiss-French..(fr_CH-latin1) \`	462	`Swiss-French..(fr_CH-latin1) \`
473	`German........(de-latin1) \`	463	`German........(de-latin1) \`
474	`Japanese......(jp106) \`	464	`Japanese......(jp106) \`
475	`$MORE_LAYOUTS"`	465	`$MORE_LAYOUTS"`
476	`PS3="-> "`	466	`PS3="-> "`
477	`echo`	467	`echo`
478	`echo "Please choose keyboard layout (type 1-6):"`	468	`echo "Please choose keyboard layout (type 1-6):"`
479	`select KEYBOARD in $keytables;`	469	`select KEYBOARD in $keytables;`
480	`do`	470	`do`
481	`case $KEYBOARD in`	471	`case $KEYBOARD in`
482	`*)`	472	`*)`
483	`# extract keyboard layout string from $KEYBOARD`	473	`# extract keyboard layout string from $KEYBOARD`
484	`KEYBOARD=${KEYBOARD##*(}`	474	`KEYBOARD=${KEYBOARD##*(}`
485	`KEYBOARD=${KEYBOARD%%)}`	475	`KEYBOARD=${KEYBOARD%%)}`
486	`break`	476	`break`
487	`;;`	477	`;;`
488	`esac`	478	`esac`
489	`done`	479	`done`
490	`fi`	480	`fi`
491	`fi`	481	`fi`
492		482
493	`### set keyboard`	483	`### set keyboard`
494	`if [ -x /usr/bin/system-config-keyboard ]; then`	484	`if [ -x /usr/bin/system-config-keyboard ]; then`
495	`if [ "$KEYBOARD" = "$MORE_LAYOUTS" ]; then`	485	`if [ "$KEYBOARD" = "$MORE_LAYOUTS" ]; then`
496	`system-config-keyboard --text`	486	`system-config-keyboard --text`
497	`else`	487	`else`
498	`echo -n "Set keyboard to '$KEYBOARD', please wait ... "`	488	`echo -n "Set keyboard to '$KEYBOARD', please wait ... "`
499	`system-config-keyboard --noui $KEYBOARD >/dev/null 2>&1`	489	`system-config-keyboard --noui $KEYBOARD >/dev/null 2>&1`
500	`echo "done."`	490	`echo "done."`

Subversion Repositories livecd

(root)/trunk/customize/runlast @ 84 – Rev 83 → 84