WebSVN – livecd – Diff – /trunk/customize/runlast


#!/bin/bash
#
# Fix things during bootup - run last 
#
# Urs Beyerle, PSI
#
 
### -----------------------------------------------------------
### definitions
### -----------------------------------------------------------
 
# dir of mounted live system: /$MOUNTDIR/live
MOUNTDIR=livecd
 
# source functions
. /$MOUNTDIR/live/liblinuxlive
. /etc/init.d/functions
 
 
### -----------------------------------------------------------
### Get boot parameters
### -----------------------------------------------------------
 
# root on NFS?
NFSROOT=$( cmdline_value nfsroot )
 
# NFS Server
NFSSERVER=$( echo $NFSROOT | cut -d":" -f1 )
 
# no local user?
NOLOCAL=$( cmdline_parameter nolocal )
 
# no root user?
NOROOT=$( cmdline_parameter noroot )
 
# no localadmin?
NOADMIN=$( cmdline_parameter noadmin )
LocalAdminGroup=localadmin
 
# set password
PASSWD=$( cmdline_value passwd )
[ ! $PASSWD ] && PASSWD=$( cmdline_value pw )
 
# no password = empty password ?
NOPASSWD=$( cmdline_parameter nopasswd )
 
# keyboard layout (kb= or keyboard=)
KEYBOARD=$( cmdline_value keyboard )
KB=$( cmdline_value kb )
 
# PSI setup?
PSI=$( cmdline_parameter psi )
 
# cups server
CUPS=$( cmdline_value cups )
 
 
 
 
# failsafe X server
SIMPLEX=$( cmdline_parameter simplex )
 
# NVIDIA driver
NVIDIA=$( cmdline_parameter nvidia )
if [ "$XDRIVER" = "nvidia" ]; then
    NVIDIA=nvidia
fi
 
# force NO NVIDIA driver - will overwite NVIDIA option
NONVIDIA=$( cmdline_parameter nonvidia )
 
# VESA driver
VESA=$( cmdline_parameter vesa )
 
# force to use a video driver ?
XDRIVER=$( cmdline_value xdriver )
 
# Xserver configurations
HSYNC=$( cmdline_value hsync )
VSYNC=$( cmdline_value vsync )
SCREEN=$( cmdline_value screen )
 
# no SWAP
NOSWAP=$( cmdline_parameter noswap )
 
# should we auto mount all found devices?
AUTOMOUNT=$( cmdline_parameter automount )
if [ $AUTOMOUNT ]; then
    MOUNTOPT="auto,users"
else
    MOUNTOPT="noauto,users,ro"
fi
 
# folder where we find data which was previously stored
# (normally on a usbstick, but can be partition)
if [ $PSI ]; then
    SAVEFOLDER=PSI_LIVECD
else
    SAVEFOLDER=SL_LIVECD
fi
 
# local home partition?
# (e.g. /dev/hda1, /dev/hda1:/my_home)
HOMELOCAL=$( cmdline_value home )
 
# fast booting ?
FASTBOOT=$( cmdline_parameter fastboot )
 
# start afs?
AFS=$( cmdline_parameter afs )
 
# or force no afs
[ $( cmdline_parameter noafs ) ] && AFS=""
 
# turn of sound (volume=0)
NOSOUND=$( cmdline_parameter nosound )
 
# local user name?
LOCALUSER=$( cmdline_value user )
 
# hostname?
HOSTNAME=$( cmdline_value hostname )
 
# do we have defined a configuration directory?
CONFIG=$( cmdline_value config )
 
# do not udpate fstab?
NOFSTAB=$( cmdline_parameter nofstab )
 
# kde/gnome as desktop
GNOME=$( cmdline_parameter gnome )
KDE=$( cmdline_parameter kde )
 
 
### -----------------------------------------------------------
### Improved hardware detection
### -----------------------------------------------------------
 
### Improved graphic card detection?
 
if [ ! $SIMPLEX ]; then
 
    ### Intel Mobile 945GM
    lspci | grep -q VGA.*Intel.*Mobile.*945GM
    if [ "$?" = "0" ]; then
	I945GM=i945gm
	## not yet supported by i810 driver
        ## [ $XDRIVER ] || XDRIVER=i810
	I915RESOLUTION=on
    fi
    ### Intel Mobile 915GM
    lspci | grep -q VGA.*Intel.*Mobile.*915GM
    if [ "$?" = "0" ]; then
	I915GM=i915gm
	[ $XDRIVER ] || XDRIVER=i810
	I855RESOLUTION=on
    fi
 
    ### Intel Mobile 855GM
    lspci | grep -q VGA.*Intel.*855GM
    if [ "$?" = "0" ]; then
	I855GM=i855gm
	I855RESOLUTION=on
    fi
fi
 
 
### -----------------------------------------------------------
### Main
### -----------------------------------------------------------
 
### try load fuse kernel module
modprobe fuse 2>/dev/null
 
### activate SWAP
# delete all swap lines in fstab
 sed -i -e "/ swap /d" /etc/fstab
# search for swap partition
fdisk -l > /var/log/fdisk
swap_part=$( fdisk -l 2>/dev/null | grep -i "Linux swap" \
            | grep "^/dev/" | cut -f 1 -d " " | head -1 )
# add to /etc/fstab and activate SWAP
if [ $swap_part ] && [ ! $NOSWAP ]; then
    echo "$swap_part               swap                    swap    defaults 0 0" >>/etc/fstab
    # activate SWAP
    swapoff -a
    swapon -a -e
fi
 
### MAC Address of eth0
MAC_ETH0=$( ifconfig | grep eth0 | awk '{print $5}' )
 
### Get CONFIG_FOLDER for this machine from NFS Server (if existing) 
#   and copy it to /$MOUNTDIR
if [ $NFSSERVER ] && [ $CONFIG ]; then
    mkdir -p /mnt/config
    echo "Search for configuration files on the server ..."
    /etc/init.d/portmap start >/dev/null
    mount -t nfs $NFSSERVER:$CONFIG /mnt/config 2>/dev/null
    if [ "$?" != "0" ]; then
	echo "Could not mount $NFSSERVER:$CONFIG."
    else
	if [ -d /mnt/config/$MAC_ETH0 ]; then
	    CONFIG_FOLDER=/$MOUNTDIR/config
	    mkdir -p $CONFIG_FOLDER
	    cp -a /mnt/config/$MAC_ETH0/* /$CONFIG_FOLDER/ 2>/dev/null
	    if [ "$?" != "0" ]; then
		echo "Could not get $NFSSERVER:$CONFIG/$MAC_ETH0"
		CONFIG_FOLDER=""
	    else
		echo "Found configuration files on the server." 
	    fi	    
	fi
	umount /mnt/config
    fi
    /etc/init.d/portmap stop >/dev/null
fi
 
### search for partitions and update fstab 
### and look for $SAVEFOLDER (previously stored data)
if [ ! $FASTBOOT ] && [ ! $NOFSTAB ]; then
    echo "Update /etc/fstab ..."
    # disable kernel messages during mount/unmount
    echo 0 > /proc/sys/kernel/printk
    DEVICES=$( list_partition_devices )
    for DEVICE in $DEVICES; do
        # try to mount the device and unmount it. 
        # If OK, we can add it to fstab
	DEV=$( echo $DEVICE | cut -d"/" -f 3 )
	if [ $DEV ]; then
	    mkdir -p /mnt/$DEV
	    mount $DEVICE /mnt/$DEV >/dev/null 2>&1
	    # search for $SAVEFOLDER
	    if [ -d /mnt/$DEV/$SAVEFOLDER ]; then
		FOUND_RESTORE_DEV=/dev/$DEV
		echo "Found folder '$SAVEFOLDER' on $FOUND_RESTORE_DEV"
	    fi
	    # unmount again
	    umount /mnt/$DEV >/dev/null 2>&1
	    # if sucsessful add to fstab, if not already done
	    if [ "$?" = "0" ]; then
		grep -q "^$DEVICE " /etc/fstab
		if [ "$?" != "0" ]; then
		    echo -e "$DEVICE \t /mnt/$DEV \t auto \t $MOUNTOPT,suid,dev,exec 0 0" >> /etc/fstab
		fi
	    else
		rmdir /mnt/$DEV 2>/dev/null
	    fi
	fi
    done
    # enable kernel messages again
    echo 6 > /proc/sys/kernel/printk
fi
 
### if $SAVEFOLDER found, set $CONFIG_FOLDER and mount $FOUND_RESTORE_MNT 
if [ $FOUND_RESTORE_DEV ]; then
    FOUND_RESTORE_MNT=$( grep "^$FOUND_RESTORE_DEV " /etc/fstab | awk '{ print $2 }' )
    CONFIG_FOLDER=$FOUND_RESTORE_MNT/$SAVEFOLDER
    echo "Will restore data from $CONFIG_FOLDER"
    mount $FOUND_RESTORE_MNT
fi
 
### source the file "config", if found in $CONFIG_FOLDER
if [ -f $CONFIG_FOLDER/config ]; then
    . $CONFIG_FOLDER/config
fi
 
### do we have a shadow/passwd file in $FOUND_FOULDER 
if [ -r $CONFIG_FOLDER/passwd.tar.gz ] && [ -r $CONFIG_FOLDER/shadow.tar.gz ]; then
    # we do not need a password for local user and root
    NOLOCAL=nolocal
    NOROOT=noroot
fi
 
### set local user name and default hostname
if [ $PSI ]; then
    [ $LOCALUSER ] || LOCALUSER=l_psi
    DEFAULT_HOSTNAME=psi
else
    [ $LOCALUSER ] || LOCALUSER=sluser
    DEFAULT_HOSTNAME=slinux
fi
 
### start 855resolution?
[ $I855RESOLUTION ] && /etc/init.d/855resolution start 2>/dev/null
 
### start 915resolution?
[ $I915RESOLUTION ] && /etc/init.d/915resolution start 2>/dev/null
 
### configure Xserver
 
### check for xorg.conf in CONFIG_FOLDER
if [ -r $CONFIG_FOLDER/xorg.conf ]; then
    cp -af $CONFIG_FOLDER/xorg.conf /etc/X11/xorg.conf
    if [ "$?" = "0" ]; then
	echo "Saved xorg.conf file found."
	XDRIVER=""
	HAVE_XORG_CONF="yes"
    fi
fi
 
### use vesa driver?
if [ $VESA ]; then
    echo "Force to use VESA driver!"
    video_driver="--set-driver=vesa"
else
    video_driver=""
fi
 
### force an other video driver?
if [ $XDRIVER ]; then
    echo "Force to use $XDRIVER driver!"
    video_driver="--set-driver=$XDRIVER"
fi
 
### run system-config-display
if [ -x /usr/bin/system-config-display ]; then
    echo "Configure Xserver:"
    if [ ! $HAVE_XORG_CONF ]; then
	if [ ! $SIMPLEX ]; then
            # default values
	    [ ! $HSYNC ] && HSYNC="30.0-80.0"
	    [ ! $VSYNC ] && VSYNC="50.0-90.0"
	    [ ! $SCREEN ] && SCREEN="1280x1024"
    
	    system-config-display \
		--reconfig \
                -v \
		--set-resolution=$SCREEN \
		--set-hsync=$HSYNC \
		--set-vsync=$VSYNC \
		$video_driver | grep Trying
	else
	    echo "Use simple Xserver configuration."
	    system-config-display --noui --reconfig -v | grep Trying
	fi
    fi
fi
 
### enable NVIDIA driver (needs nvidia, nvidia-libs rpms)
if [ $NVIDIA ] && [ ! $NONVIDIA ]; then
    # serach for Nvidia Video Card
    /sbin/lspci | grep VGA | grep -i -q nvidia
    if [ "$?" = "0" ]; then
	# lib or lib64 ?
	LIB=lib
	[ $( arch ) = "x86_64" ] && LIB=lib64
	# find out installed Nvidia driver version
	libglx=$( ls /usr/X11R6/$LIB/modules/extensions/libglx.so.1.* | head -n 1 )
	nvidia_version=${libglx##*.so.1.}
	# enable Nvidia driver (normally done by nvidia-enable - does not work on LiveCD)
	echo -n "NVIDIA graphic card found. Enable the nvidia driver ${nvidia_version} ... " 
	NVLOG=/var/log/nvidia.log
	# assuming that the kernel modules are already build 
	# link to Nvidia libs
	ln -sf ../../usr/X11R6/$LIB/libGL.so.1.${nvidia_version} /usr/$LIB/libGL.so
	ln -sf libGL.so.1.${nvidia_version} /usr/X11R6/$LIB/libGL.so
	mv /usr/X11R6/$LIB/modules/extensions/libGLcore.a /usr/X11R6/$LIB/modules/extensions/xxx.libGLcore.a.saved_by_nvidia
	mv /usr/X11R6/$LIB/modules/extensions/libglx.a /usr/X11R6/$LIB/modules/extensions/xxx.libglx.a.saved_by_nvidia
	ln -sf libglx.so.1.${nvidia_version} /usr/X11R6/$LIB/modules/extensions/libglx.so
	# reconfigure X
	/usr/sbin/nvidia-xconfig >> $NVLOG 2>&1
	if [ $PSI ]; then
	    echo 'NVIDIA=on' >> /etc/sysconfig/cfengine
	fi
	echo "ok."
    fi
fi
 
### set special video driver options for Intel Mobile
 
#   (external VGA output: Clone)
if [ $I915GM ] || [ $I855GM ]; then
    sed -e "/Section[ \t]*\"Device\"/,/EndSection/{
     /^[ \t]*Option[ \t]*\"MonitorLayout\"/d
     /^[ \t]*Option[ \t]*\"Clone/d
     /EndSection/i\\
        Option      \"MonitorLayout\" \"CRT,LFP\"\\
        Option      \"Clone\" \"1\"\\
        Option      \"CloneRefresh\" \"60\"
     }" -i /etc/X11/xorg.conf
fi
 
# Set BoardName for Intel 915GM
if [ $I915GM ]; then
    sed -i 's/BoardName.*VESA driver.*/BoardName   "Intel 915"/' /etc/X11/xorg.conf
fi
 
 
### parameter KB = KEYBOARD
KEYBOARD=$KB
 
### ask user for keyboard layout if no keyboard given
if [ -x /usr/bin/system-config-keyboard ]; then
    if [ ! $KEYBOARD ]; then
	MORE_LAYOUTS="more..."
	keytables="U.S...........(us) \
	           Swiss-German..(sg-latin1) \
                   Swiss-French..(fr_CH-latin1) \
                   German........(de-latin1) \
                   Japanese......(jp106) \
                   $MORE_LAYOUTS"
	PS3="-> "
	echo
	echo "Please choose keyboard layout (type 1-6):"
	select KEYBOARD in $keytables;
	  do
	     case $KEYBOARD in
	        *)
	        # extract keyboard layout string from $KEYBOARD
	        KEYBOARD=${KEYBOARD##*(}
                KEYBOARD=${KEYBOARD%%)}
                break
                ;;
	     esac
	  done
    fi
fi
 
### set keyboard
if [ -x /usr/bin/system-config-keyboard ]; then
    if [ "$KEYBOARD" = "$MORE_LAYOUTS" ]; then
	system-config-keyboard --text
    else
	echo -n "Set keyboard to '$KEYBOARD', please wait ... "
	system-config-keyboard --noui $KEYBOARD >/dev/null 2>&1
	echo "done."
    fi
    echo
fi
 
### update AFS users and SEPP links (only for PSI)
if [ $PSI ] && [ $AFS ]; then
    echo "Update AFS users and SEPP links..."
    [ -x /afs/psi.ch/sys/common/update_user.pl ] && /afs/psi.ch/sys/common/update_user.pl >/dev/null 2>&1 &
    [ -x /afs/psi.ch/sys/common/update_sepp.pl ] && /afs/psi.ch/sys/common/update_sepp.pl >/dev/null 2>&1 &
    echo
fi
 
### create local user, if "nolocal" is not set 
if [ ! $NOLOCAL ]; then
 
    user=$LOCALUSER
    # execute useradd twice, to make it work (don't know why)
    if [ $PSI ] && [ ! $NOADMIN ]; then
	userdel -r $user 2>/dev/null
	useradd -G $LocalAdminGroup $user 2>/dev/null
	userdel -r $user 2>/dev/null
	useradd -G $LocalAdminGroup $user
    else
	userdel -r $user 2>/dev/null
	useradd $user 2>/dev/null
	userdel -r $user 2>/dev/null
	useradd $user
    fi
 
    # only for PSI: change users's group to GID=UID+50000
    if [ $PSI ]; then
	uid=$( id -u $user )
	old_gid=$( id -g $user )
	new_gid=$(( $old_gid + 50000 ))
        # fix /etc/group
	sed -i "s/${user}:x:${old_gid}:/${user}:x:${new_gid}:/" /etc/group
        # fix /etc/passwd
	sed -i "s/${user}:x:${uid}:${old_gid}:/${user}:x:${uid}:${new_gid}:/" /etc/passwd
        # fix perm of /home/${user)
	chgrp -R $user /home/${user}
    fi
fi
 
### copy special files for PSI user l_psi
if [ $PSI ] && [ ! $NOLOCAL ]; then
    find /usr/share/${LOCALUSER}/ -maxdepth 1 -mindepth 1 2>/dev/null | \
    while read dir; do 
	cp -a $dir /home/${LOCALUSER}/
    done
    # set owner
    chown -R ${LOCALUSER}.${LOCALUSER} /home/${LOCALUSER}
fi
 
### set password for root and local user
if [ ! $NOPASSWD ]; then
    if [ ! $NOROOT ] || [ ! $NOLOCAL ]; then
	echo -n "Set password for "
	if [ ! $NOROOT ]; then
	    echo -n "'root' "
	fi
	if [ ! $NOROOT ] && [ ! $NOLOCAL ]; then
	    echo -n "and "
	fi
	if [ ! $NOLOCAL ]; then
	    echo -n "local user '$user' "
	fi
	echo
 
	if [ ! $NOLOCAL ]; then
	    echo "Login as local user '$user' with this password."
	    echo
	fi
 
        # set password, if not yet given by $PASSWD
	until [ $PASSWD ]; do
	    echo -n "Password: "
	    read -s PASSWD
	    echo
	done
	if [ ! $NOROOT ]; then
	    echo $PASSWD | passwd --stdin root >/dev/null
	fi
	if [ ! $NOLOCAL ]; then
	    echo $PASSWD | passwd --stdin $user >/dev/null
	fi
	echo
    fi
 
else
    # set root and $LOCALUSER to empty password
    sed -i "s|^root:.*|root::12345:0:99999:1:::|" /etc/shadow
    sed -i "s|^$LOCALUSER:.*|$LOCALUSER::12345:0:99999:1:::|" /etc/shadow
fi
 
### try to get hostname from DNS, if not yet defined
if [ ! $HOSTNAME ]; then
    echo "Try to get hostname from DNS ..."
    IP=$( /sbin/ip add show dev eth0 2>/dev/null | grep "inet " | cut -d" " -f6 | sed 's|/.*||' )
    if [ "$IP" = "" ]; then
	IP=$( /sbin/ip add show dev eth1 2>/dev/null | grep "inet " | cut -d" " -f6 | sed 's|/.*||' )
    fi
    if [ "$IP" != "" ]; then
	host -W 1 $IP >/dev/null 2>&1
	if [ "$?" = "0" ]; then
	    HOSTNAME=$( host -W 1 $IP | cut -d" " -f 5 | cut -d"." -f 1 )
	    if [ "$HOSTNAME" = "3(NXDOMAIN)" ]; then
		HOSTNAME=$DEFAULT_HOSTNAME
	    fi	
	    if [ "$HOSTNAME" = "no" ]; then
		HOSTNAME=$DEFAULT_HOSTNAME
	    fi	
	fi
    fi
fi
 
### define default hostname, if $HOSTNAME still not yet set
if [ ! $HOSTNAME ]; then
    HOSTNAME=$DEFAULT_HOSTNAME
fi
 
### set hostname
export HOSTNAME=$HOSTNAME
hostname $HOSTNAME
sed -i "s/HOSTNAME=.*/HOSTNAME=${HOSTNAME}/" /etc/sysconfig/network
if [ $PSI ]; then
    sed -i "s/hostname=.*/hostname=${HOSTNAME}.psi.ch/" /etc/ssmtp/ssmtp.conf
    sed -i "s/HOSTNAME=.*/HOSTNAME=${HOSTNAME}/" /etc/sysconfig/cfengine
fi
for iface in eth0 eth1 eth2 eth3; do
    if [ -e /etc/sysconfig/network-scripts/ifcfg-${iface} ]; then
	echo "DHCP_HOSTNAME=${HOSTNAME}" >> /etc/sysconfig/network-scripts/ifcfg-${iface}
    fi
done
 
echo "Hostname set to: $HOSTNAME"
echo
 
### set cups server
if [ $CUPS ]; then
    sed -i "s|.*ServerName .*|ServerName  $CUPS|" /etc/cups/client.conf
fi
 
### some magic: just access this file in order that it can be sourced later
ls -lag /etc/X11/xinit/xinitrc-common >/dev/null 2>&1
sleep 1
 
### set keyboard for rdesktop
if [ -e /etc/X11/xorg.conf ]; then
    grep -q de_CH /etc/X11/xorg.conf && RDESKTOP_OPT="-k de-ch"
    grep -q fr_CH /etc/X11/xorg.conf && RDESKTOP_OPT="-k fr-ch"
    grep -q jp106 /etc/X11/xorg.conf && RDESKTOP_OPT="-k ja"
fi
 
if [ "$RDESKTOP_OPT" ]; then
    echo "alias rdesktop='rdesktop $RDESKTOP_OPT'" > /etc/profile.d/rdesktop.sh
    echo "export RDESKTOP_OPT='$RDESKTOP_OPT'" >> /etc/profile.d/rdesktop.sh
    chmod 755 /etc/profile.d/rdesktop.sh
fi
 
### run setup script, if found in $CONFIG_FOLDER on $FOUND_RESTORE_MNT
if [ -r $CONFIG_FOLDER/setup ]; then
    CONFIG_FOLDER=$CONFIG_FOLDER bash $CONFIG_FOLDER/setup
fi
 
### umount $FOUND_RESTORE_MNT
if [ $FOUND_RESTORE_MNT ]; then
    echo "Unmount $FOUND_RESTORE_MNT"
    umount $FOUND_RESTORE_MNT 2>/dev/null
    sleep 3
fi
 
### local home partition?
if [ $HOMELOCAL ]; then
    mv /home /home.old
    mkdir -p /mnt/home_par
    # which partition? which folder?
    HOMEPAR=$( echo $HOMELOCAL | cut -d":" -f1 )
    HOMEDIR=$( echo $HOMELOCAL | grep ":" | cut -d":" -f2 )
    umount $HOMEPAR 2>/dev/null
    # mount it with option noatime, healthy for USB flash drives
    mount -o noatime -rw $HOMEPAR /mnt/home_par 2>/dev/null
    if [ "$?" != "0" ]; then
	echo "ERROR: Could not mount read/write $HOMEPAR"
	umount $HOMEPAR >/dev/null 2&>1
	mv /home.old /home
    else
	echo "$HOMEPAR mounted on /mnt/home_par"
	# link to new home
	ln -s /mnt/home_par/$HOMEDIR /home
	if [ ! -d /mnt/home_par/$HOMEDIR ]; then
	    echo "$HOMELOCAL not found on $HOMEPAR"
	    echo mkdir -p /mnt/home_par/$HOMEDIR
	    if [ "$?" != "0" ]; then
		echo "ERROR: Could not create $HOMELOCAL on $HOMEPAR"
		umount $HOMEPAR >/dev/null 2&>1
		rm -f /home
		mv /home.old /home
	    else
		echo "Folder $HOMEDIR created on $HOMEPAR"
	    fi
	fi
	if [ -d /mnt/home_par/$HOMEDIR ]; then
	    echo "/home is linked to /mnt/home_par${HOMEDIR}"
	    # copy files from /home.old to /home, which are not yet there
	    /bin/cp -a -i --reply=no /home.old/* /home/ 
	    rm -rf /home.old
	fi
    fi
    sleep 2
fi
 
### mount all if AUTOMOUNT set
if [ $AUTOMOUNT ]; then
    mount -a
fi
 
### unload/load sound module for snd-card-X (timing problem?)
rpm -q alsa-lib | grep el5 >/dev/null
if [ "$?" = "0" ]; then
    sound_modules=$( grep snd-card- /etc/modprobe.conf | awk ' $1 ~ /alias/ { print $3 }' | tr - _ )
    for module in $sound_modules; do
	lsmod | awk '{ print $1 }' | grep $module >/dev/null 2>&1
	if [ "$?" = "0" ]; then
	    rmmod $module    >/dev/null 2>&1
	    sleep 2
	    modprobe $module >/dev/null 2>&1
	fi
    done
fi
 
### unmute all mixers and set volumes
if [ -x /usr/bin/set-volume ]; then 
    if [ $NOSOUND ]; then
	/usr/bin/set-volume 0 > /var/log/set-volume.log 2>&1 &
    else
	/usr/bin/set-volume 60 > /var/log/set-volume.log 2>&1 &
    fi
fi
 
### set kde or gnome as desktop
if [ $KDE ]; then
    sed -i "/^DESKTOP=.*/d" /etc/sysconfig/desktop 2&>/dev/null
    echo "DESKTOP=KDE" >> /etc/sysconfig/desktop
fi
if [ $GNOME ]; then
    sed -i "/^DESKTOP=.*/d" /etc/sysconfig/desktop 2&>/dev/null
    echo "DESKTOP=GNOME" >> /etc/sysconfig/desktop
fi
 
 
 
 
 
 

Rev 43	Rev 48
1	`#!/bin/bash`	1	`#!/bin/bash`
2	`#`	2	`#`
3	`# Fix things during bootup - run last`	3	`# Fix things during bootup - run last`
4	`#`	4	`#`
5	`# Urs Beyerle, PSI`	5	`# Urs Beyerle, PSI`
6	`#`	6	`#`
7		7
8	`### -----------------------------------------------------------`	8	`### -----------------------------------------------------------`
9	`### definitions`	9	`### definitions`
10	`### -----------------------------------------------------------`	10	`### -----------------------------------------------------------`
11		11
12	`# dir of mounted live system: /$MOUNTDIR/live`	12	`# dir of mounted live system: /$MOUNTDIR/live`
13	`MOUNTDIR=livecd`	13	`MOUNTDIR=livecd`
14		14
15	`# source functions`	15	`# source functions`
16	`. /$MOUNTDIR/live/liblinuxlive`	16	`. /$MOUNTDIR/live/liblinuxlive`
17	`. /etc/init.d/functions`	17	`. /etc/init.d/functions`
18		18
19		19
20	`### -----------------------------------------------------------`	20	`### -----------------------------------------------------------`
21	`### Get boot parameters`	21	`### Get boot parameters`
22	`### -----------------------------------------------------------`	22	`### -----------------------------------------------------------`
23		23
24	`# root on NFS?`	24	`# root on NFS?`
25	`NFSROOT=$( cmdline_value nfsroot )`	25	`NFSROOT=$( cmdline_value nfsroot )`
26		26
27	`# NFS Server`	27	`# NFS Server`
28	`NFSSERVER=$( echo $NFSROOT \| cut -d":" -f1 )`	28	`NFSSERVER=$( echo $NFSROOT \| cut -d":" -f1 )`
29		29
30	`# no local user?`	30	`# no local user?`
31	`NOLOCAL=$( cmdline_parameter nolocal )`	31	`NOLOCAL=$( cmdline_parameter nolocal )`
32		32
33	`# no root user?`	33	`# no root user?`
34	`NOROOT=$( cmdline_parameter noroot )`	34	`NOROOT=$( cmdline_parameter noroot )`
35		35
36	`# no localadmin?`	36	`# no localadmin?`
37	`NOADMIN=$( cmdline_parameter noadmin )`	37	`NOADMIN=$( cmdline_parameter noadmin )`
38	`LocalAdminGroup=localadmin`	38	`LocalAdminGroup=localadmin`
39		39
40	`# set password`	40	`# set password`
41	`PASSWD=$( cmdline_value passwd )`	41	`PASSWD=$( cmdline_value passwd )`
42	`[ ! $PASSWD ] && PASSWD=$( cmdline_value pw )`	42	`[ ! $PASSWD ] && PASSWD=$( cmdline_value pw )`
43		43
44	`# no password = empty password ?`	44	`# no password = empty password ?`
45	`NOPASSWD=$( cmdline_parameter nopasswd )`	45	`NOPASSWD=$( cmdline_parameter nopasswd )`
46		46
47	`# keyboard layout (kb= or keyboard=)`	47	`# keyboard layout (kb= or keyboard=)`
48	`KEYBOARD=$( cmdline_value keyboard )`	48	`KEYBOARD=$( cmdline_value keyboard )`
49	`KB=$( cmdline_value kb )`	49	`KB=$( cmdline_value kb )`
50		50
51	`# PSI setup?`	51	`# PSI setup?`
52	`PSI=$( cmdline_parameter psi )`	52	`PSI=$( cmdline_parameter psi )`
53		53
54	`# cups server`	54	`# cups server`
55	`CUPS=$( cmdline_value cups )`	55	`CUPS=$( cmdline_value cups )`
56		56
57	`# no X11`	-
58	`NOX=$( cmdline_parameter nox )`	-
59		-
60	`# failsafe X server`	57	`# failsafe X server`
61	`SIMPLEX=$( cmdline_parameter simplex )`	58	`SIMPLEX=$( cmdline_parameter simplex )`
62		59
63	`# NVIDIA driver`	60	`# NVIDIA driver`
64	`NVIDIA=$( cmdline_parameter nvidia )`	61	`NVIDIA=$( cmdline_parameter nvidia )`
65	`if [ "$XDRIVER" = "nvidia" ]; then`	62	`if [ "$XDRIVER" = "nvidia" ]; then`
66	`NVIDIA=nvidia`	63	`NVIDIA=nvidia`
67	`fi`	64	`fi`
68		65
69	`# force NO NVIDIA driver - will overwite NVIDIA option`	66	`# force NO NVIDIA driver - will overwite NVIDIA option`
70	`NONVIDIA=$( cmdline_parameter nonvidia )`	67	`NONVIDIA=$( cmdline_parameter nonvidia )`
71		68
72	`# VESA driver`	69	`# VESA driver`
73	`VESA=$( cmdline_parameter vesa )`	70	`VESA=$( cmdline_parameter vesa )`
74		71
75	`# force to use a video driver ?`	72	`# force to use a video driver ?`
76	`XDRIVER=$( cmdline_value xdriver )`	73	`XDRIVER=$( cmdline_value xdriver )`
77		74
78	`# Xserver configurations`	75	`# Xserver configurations`
79	`HSYNC=$( cmdline_value hsync )`	76	`HSYNC=$( cmdline_value hsync )`
80	`VSYNC=$( cmdline_value vsync )`	77	`VSYNC=$( cmdline_value vsync )`
81	`SCREEN=$( cmdline_value screen )`	78	`SCREEN=$( cmdline_value screen )`
82		79
83	`# no SWAP`	80	`# no SWAP`
84	`NOSWAP=$( cmdline_parameter noswap )`	81	`NOSWAP=$( cmdline_parameter noswap )`
85		82
86	`# should we auto mount all found devices?`	83	`# should we auto mount all found devices?`
87	`AUTOMOUNT=$( cmdline_parameter automount )`	84	`AUTOMOUNT=$( cmdline_parameter automount )`
88	`if [ $AUTOMOUNT ]; then`	85	`if [ $AUTOMOUNT ]; then`
89	`MOUNTOPT="auto,users"`	86	`MOUNTOPT="auto,users"`
90	`else`	87	`else`
91	`MOUNTOPT="noauto,users,ro"`	88	`MOUNTOPT="noauto,users,ro"`
92	`fi`	89	`fi`
93		90
94	`# folder where we find data which was previously stored`	91	`# folder where we find data which was previously stored`
95	`# (normally on a usbstick, but can be partition)`	92	`# (normally on a usbstick, but can be partition)`
96	`if [ $PSI ]; then`	93	`if [ $PSI ]; then`
97	`SAVEFOLDER=PSI_LIVECD`	94	`SAVEFOLDER=PSI_LIVECD`
98	`else`	95	`else`
99	`SAVEFOLDER=SL_LIVECD`	96	`SAVEFOLDER=SL_LIVECD`
100	`fi`	97	`fi`
101		98
102	`# local home partition?`	99	`# local home partition?`
103	`# (e.g. /dev/hda1, /dev/hda1:/my_home)`	100	`# (e.g. /dev/hda1, /dev/hda1:/my_home)`
104	`HOMELOCAL=$( cmdline_value home )`	101	`HOMELOCAL=$( cmdline_value home )`
105		102
106	`# fast booting ?`	103	`# fast booting ?`
107	`FASTBOOT=$( cmdline_parameter fastboot )`	104	`FASTBOOT=$( cmdline_parameter fastboot )`
108		105
109	`# start afs?`	106	`# start afs?`
110	`AFS=$( cmdline_parameter afs )`	107	`AFS=$( cmdline_parameter afs )`
111		108
112	`# or force no afs`	109	`# or force no afs`
113	`[ $( cmdline_parameter noafs ) ] && AFS=""`	110	`[ $( cmdline_parameter noafs ) ] && AFS=""`
114		111
115	`# turn of sound (volume=0)`	112	`# turn of sound (volume=0)`
116	`NOSOUND=$( cmdline_parameter nosound )`	113	`NOSOUND=$( cmdline_parameter nosound )`
117		114
118	`# local user name?`	115	`# local user name?`
119	`LOCALUSER=$( cmdline_value user )`	116	`LOCALUSER=$( cmdline_value user )`
120		117
121	`# hostname?`	118	`# hostname?`
122	`HOSTNAME=$( cmdline_value hostname )`	119	`HOSTNAME=$( cmdline_value hostname )`
123		120
124	`# do we have defined a configuration directory?`	121	`# do we have defined a configuration directory?`
125	`CONFIG=$( cmdline_value config )`	122	`CONFIG=$( cmdline_value config )`
126		123
127	`# do not udpate fstab?`	124	`# do not udpate fstab?`
128	`NOFSTAB=$( cmdline_parameter nofstab )`	125	`NOFSTAB=$( cmdline_parameter nofstab )`
129		126
130	`# kde/gnome as desktop`	127	`# kde/gnome as desktop`
131	`GNOME=$( cmdline_parameter gnome )`	128	`GNOME=$( cmdline_parameter gnome )`
132	`KDE=$( cmdline_parameter kde )`	129	`KDE=$( cmdline_parameter kde )`
133		130
134		131
135	`### -----------------------------------------------------------`	132	`### -----------------------------------------------------------`
136	`### Improved hardware detection`	133	`### Improved hardware detection`
137	`### -----------------------------------------------------------`	134	`### -----------------------------------------------------------`
138		135
139	`### Improved graphic card detection?`	136	`### Improved graphic card detection?`
140		137
141	`if [ ! $SIMPLEX ]; then`	138	`if [ ! $SIMPLEX ]; then`
142		139
143	`### Intel Mobile 945GM`	140	`### Intel Mobile 945GM`
144	`lspci \| grep -q VGA.Intel.Mobile.*945GM`	141	`lspci \| grep -q VGA.Intel.Mobile.*945GM`
145	`if [ "$?" = "0" ]; then`	142	`if [ "$?" = "0" ]; then`
146	`I945GM=i945gm`	143	`I945GM=i945gm`
147	`## not yet supported by i810 driver`	144	`## not yet supported by i810 driver`
148	`## [ $XDRIVER ] \|\| XDRIVER=i810`	145	`## [ $XDRIVER ] \|\| XDRIVER=i810`
149	`I915RESOLUTION=on`	146	`I915RESOLUTION=on`
150	`fi`	147	`fi`
151	`### Intel Mobile 915GM`	148	`### Intel Mobile 915GM`
152	`lspci \| grep -q VGA.Intel.Mobile.*915GM`	149	`lspci \| grep -q VGA.Intel.Mobile.*915GM`
153	`if [ "$?" = "0" ]; then`	150	`if [ "$?" = "0" ]; then`
154	`I915GM=i915gm`	151	`I915GM=i915gm`
155	`[ $XDRIVER ] \|\| XDRIVER=i810`	152	`[ $XDRIVER ] \|\| XDRIVER=i810`
156	`I855RESOLUTION=on`	153	`I855RESOLUTION=on`
157	`fi`	154	`fi`
158		155
159	`### Intel Mobile 855GM`	156	`### Intel Mobile 855GM`
160	`lspci \| grep -q VGA.Intel.855GM`	157	`lspci \| grep -q VGA.Intel.855GM`
161	`if [ "$?" = "0" ]; then`	158	`if [ "$?" = "0" ]; then`
162	`I855GM=i855gm`	159	`I855GM=i855gm`
163	`I855RESOLUTION=on`	160	`I855RESOLUTION=on`
164	`fi`	161	`fi`
165	`fi`	162	`fi`
166		163
167		164
168	`### -----------------------------------------------------------`	165	`### -----------------------------------------------------------`
169	`### Main`	166	`### Main`
170	`### -----------------------------------------------------------`	167	`### -----------------------------------------------------------`
171		168
172	`### try load fuse kernel module`	169	`### try load fuse kernel module`
173	`modprobe fuse 2>/dev/null`	170	`modprobe fuse 2>/dev/null`
174		171
175	`### activate SWAP`	172	`### activate SWAP`
176	`# delete all swap lines in fstab`	173	`# delete all swap lines in fstab`
177	`sed -i -e "/ swap /d" /etc/fstab`	174	`sed -i -e "/ swap /d" /etc/fstab`
178	`# search for swap partition`	175	`# search for swap partition`
179	`fdisk -l > /var/log/fdisk`	176	`fdisk -l > /var/log/fdisk`
180	`swap_part=$( fdisk -l 2>/dev/null \| grep -i "Linux swap" \`	177	`swap_part=$( fdisk -l 2>/dev/null \| grep -i "Linux swap" \`
181	`\| grep "^/dev/" \| cut -f 1 -d " " \| head -1 )`	178	`\| grep "^/dev/" \| cut -f 1 -d " " \| head -1 )`
182	`# add to /etc/fstab and activate SWAP`	179	`# add to /etc/fstab and activate SWAP`
183	`if [ $swap_part ] && [ ! $NOSWAP ]; then`	180	`if [ $swap_part ] && [ ! $NOSWAP ]; then`
184	`echo "$swap_part swap swap defaults 0 0" >>/etc/fstab`	181	`echo "$swap_part swap swap defaults 0 0" >>/etc/fstab`
185	`# activate SWAP`	182	`# activate SWAP`
186	`swapoff -a`	183	`swapoff -a`
187	`swapon -a -e`	184	`swapon -a -e`
188	`fi`	185	`fi`
189		186
190	`### MAC Address of eth0`	187	`### MAC Address of eth0`
191	`MAC_ETH0=$( ifconfig \| grep eth0 \| awk '{print $5}' )`	188	`MAC_ETH0=$( ifconfig \| grep eth0 \| awk '{print $5}' )`
192		189
193	`### Get CONFIG_FOLDER for this machine from NFS Server (if existing)`	190	`### Get CONFIG_FOLDER for this machine from NFS Server (if existing)`
194	`# and copy it to /$MOUNTDIR`	191	`# and copy it to /$MOUNTDIR`
195	`if [ $NFSSERVER ] && [ $CONFIG ]; then`	192	`if [ $NFSSERVER ] && [ $CONFIG ]; then`
196	`mkdir -p /mnt/config`	193	`mkdir -p /mnt/config`
197	`echo "Search for configuration files on the server ..."`	194	`echo "Search for configuration files on the server ..."`
198	`/etc/init.d/portmap start >/dev/null`	195	`/etc/init.d/portmap start >/dev/null`
199	`mount -t nfs $NFSSERVER:$CONFIG /mnt/config 2>/dev/null`	196	`mount -t nfs $NFSSERVER:$CONFIG /mnt/config 2>/dev/null`
200	`if [ "$?" != "0" ]; then`	197	`if [ "$?" != "0" ]; then`
201	`echo "Could not mount $NFSSERVER:$CONFIG."`	198	`echo "Could not mount $NFSSERVER:$CONFIG."`
202	`else`	199	`else`
203	`if [ -d /mnt/config/$MAC_ETH0 ]; then`	200	`if [ -d /mnt/config/$MAC_ETH0 ]; then`
204	`CONFIG_FOLDER=/$MOUNTDIR/config`	201	`CONFIG_FOLDER=/$MOUNTDIR/config`
205	`mkdir -p $CONFIG_FOLDER`	202	`mkdir -p $CONFIG_FOLDER`
206	`cp -a /mnt/config/$MAC_ETH0/* /$CONFIG_FOLDER/ 2>/dev/null`	203	`cp -a /mnt/config/$MAC_ETH0/* /$CONFIG_FOLDER/ 2>/dev/null`
207	`if [ "$?" != "0" ]; then`	204	`if [ "$?" != "0" ]; then`
208	`echo "Could not get $NFSSERVER:$CONFIG/$MAC_ETH0"`	205	`echo "Could not get $NFSSERVER:$CONFIG/$MAC_ETH0"`
209	`CONFIG_FOLDER=""`	206	`CONFIG_FOLDER=""`
210	`else`	207	`else`
211	`echo "Found configuration files on the server."`	208	`echo "Found configuration files on the server."`
212	`fi`	209	`fi`
213	`fi`	210	`fi`
214	`umount /mnt/config`	211	`umount /mnt/config`
215	`fi`	212	`fi`
216	`/etc/init.d/portmap stop >/dev/null`	213	`/etc/init.d/portmap stop >/dev/null`
217	`fi`	214	`fi`
218		215
219	`### search for partitions and update fstab`	216	`### search for partitions and update fstab`
220	`### and look for $SAVEFOLDER (previously stored data)`	217	`### and look for $SAVEFOLDER (previously stored data)`
221	`if [ ! $FASTBOOT ] && [ ! $NOFSTAB ]; then`	218	`if [ ! $FASTBOOT ] && [ ! $NOFSTAB ]; then`
222	`echo "Update /etc/fstab ..."`	219	`echo "Update /etc/fstab ..."`
223	`# disable kernel messages during mount/unmount`	220	`# disable kernel messages during mount/unmount`
224	`echo 0 > /proc/sys/kernel/printk`	221	`echo 0 > /proc/sys/kernel/printk`
225	`DEVICES=$( list_partition_devices )`	222	`DEVICES=$( list_partition_devices )`
226	`for DEVICE in $DEVICES; do`	223	`for DEVICE in $DEVICES; do`
227	`# try to mount the device and unmount it.`	224	`# try to mount the device and unmount it.`
228	`# If OK, we can add it to fstab`	225	`# If OK, we can add it to fstab`
229	`DEV=$( echo $DEVICE \| cut -d"/" -f 3 )`	226	`DEV=$( echo $DEVICE \| cut -d"/" -f 3 )`
230	`if [ $DEV ]; then`	227	`if [ $DEV ]; then`
231	`mkdir -p /mnt/$DEV`	228	`mkdir -p /mnt/$DEV`
232	`mount $DEVICE /mnt/$DEV >/dev/null 2>&1`	229	`mount $DEVICE /mnt/$DEV >/dev/null 2>&1`
233	`# search for $SAVEFOLDER`	230	`# search for $SAVEFOLDER`
234	`if [ -d /mnt/$DEV/$SAVEFOLDER ]; then`	231	`if [ -d /mnt/$DEV/$SAVEFOLDER ]; then`
235	`FOUND_RESTORE_DEV=/dev/$DEV`	232	`FOUND_RESTORE_DEV=/dev/$DEV`
236	`echo "Found folder '$SAVEFOLDER' on $FOUND_RESTORE_DEV"`	233	`echo "Found folder '$SAVEFOLDER' on $FOUND_RESTORE_DEV"`
237	`fi`	234	`fi`
238	`# unmount again`	235	`# unmount again`
239	`umount /mnt/$DEV >/dev/null 2>&1`	236	`umount /mnt/$DEV >/dev/null 2>&1`
240	`# if sucsessful add to fstab, if not already done`	237	`# if sucsessful add to fstab, if not already done`
241	`if [ "$?" = "0" ]; then`	238	`if [ "$?" = "0" ]; then`
242	`grep -q "^$DEVICE " /etc/fstab`	239	`grep -q "^$DEVICE " /etc/fstab`
243	`if [ "$?" != "0" ]; then`	240	`if [ "$?" != "0" ]; then`
244	`echo -e "$DEVICE \t /mnt/$DEV \t auto \t $MOUNTOPT,suid,dev,exec 0 0" >> /etc/fstab`	241	`echo -e "$DEVICE \t /mnt/$DEV \t auto \t $MOUNTOPT,suid,dev,exec 0 0" >> /etc/fstab`
245	`fi`	242	`fi`
246	`else`	243	`else`
247	`rmdir /mnt/$DEV 2>/dev/null`	244	`rmdir /mnt/$DEV 2>/dev/null`
248	`fi`	245	`fi`
249	`fi`	246	`fi`
250	`done`	247	`done`
251	`# enable kernel messages again`	248	`# enable kernel messages again`
252	`echo 6 > /proc/sys/kernel/printk`	249	`echo 6 > /proc/sys/kernel/printk`
253	`fi`	250	`fi`
254		251
255	`### if $SAVEFOLDER found, set $CONFIG_FOLDER and mount $FOUND_RESTORE_MNT`	252	`### if $SAVEFOLDER found, set $CONFIG_FOLDER and mount $FOUND_RESTORE_MNT`
256	`if [ $FOUND_RESTORE_DEV ]; then`	253	`if [ $FOUND_RESTORE_DEV ]; then`
257	`FOUND_RESTORE_MNT=$( grep "^$FOUND_RESTORE_DEV " /etc/fstab \| awk '{ print $2 }' )`	254	`FOUND_RESTORE_MNT=$( grep "^$FOUND_RESTORE_DEV " /etc/fstab \| awk '{ print $2 }' )`
258	`CONFIG_FOLDER=$FOUND_RESTORE_MNT/$SAVEFOLDER`	255	`CONFIG_FOLDER=$FOUND_RESTORE_MNT/$SAVEFOLDER`
259	`echo "Will restore data from $CONFIG_FOLDER"`	256	`echo "Will restore data from $CONFIG_FOLDER"`
260	`mount $FOUND_RESTORE_MNT`	257	`mount $FOUND_RESTORE_MNT`
261	`fi`	258	`fi`
262		259
263	`### source the file "config", if found in $CONFIG_FOLDER`	260	`### source the file "config", if found in $CONFIG_FOLDER`
264	`if [ -f $CONFIG_FOLDER/config ]; then`	261	`if [ -f $CONFIG_FOLDER/config ]; then`
265	`. $CONFIG_FOLDER/config`	262	`. $CONFIG_FOLDER/config`
266	`fi`	263	`fi`
267		264
268	`### do we have a shadow/passwd file in $FOUND_FOULDER`	265	`### do we have a shadow/passwd file in $FOUND_FOULDER`
269	`if [ -r $CONFIG_FOLDER/passwd.tar.gz ] && [ -r $CONFIG_FOLDER/shadow.tar.gz ]; then`	266	`if [ -r $CONFIG_FOLDER/passwd.tar.gz ] && [ -r $CONFIG_FOLDER/shadow.tar.gz ]; then`
270	`# we do not need a password for local user and root`	267	`# we do not need a password for local user and root`
271	`NOLOCAL=nolocal`	268	`NOLOCAL=nolocal`
272	`NOROOT=noroot`	269	`NOROOT=noroot`
273	`fi`	270	`fi`
274		271
275	`### set local user name and default hostname`	272	`### set local user name and default hostname`
276	`if [ $PSI ]; then`	273	`if [ $PSI ]; then`
277	`[ $LOCALUSER ] \|\| LOCALUSER=l_psi`	274	`[ $LOCALUSER ] \|\| LOCALUSER=l_psi`
278	`DEFAULT_HOSTNAME=psi`	275	`DEFAULT_HOSTNAME=psi`
279	`else`	276	`else`
280	`[ $LOCALUSER ] \|\| LOCALUSER=sluser`	277	`[ $LOCALUSER ] \|\| LOCALUSER=sluser`
281	`DEFAULT_HOSTNAME=slinux`	278	`DEFAULT_HOSTNAME=slinux`
282	`fi`	279	`fi`
283		280
284	`### start 855resolution?`	281	`### start 855resolution?`
285	`[ $I855RESOLUTION ] && /etc/init.d/855resolution start 2>/dev/null`	282	`[ $I855RESOLUTION ] && /etc/init.d/855resolution start 2>/dev/null`
286		283
287	`### start 915resolution?`	284	`### start 915resolution?`
288	`[ $I915RESOLUTION ] && /etc/init.d/915resolution start 2>/dev/null`	285	`[ $I915RESOLUTION ] && /etc/init.d/915resolution start 2>/dev/null`
289		286
290	`### configure Xserver`	287	`### configure Xserver`
291		288
292	`### check for xorg.conf in CONFIG_FOLDER`	289	`### check for xorg.conf in CONFIG_FOLDER`
293	`if [ -r $CONFIG_FOLDER/xorg.conf ]; then`	290	`if [ -r $CONFIG_FOLDER/xorg.conf ]; then`
294	`cp -af $CONFIG_FOLDER/xorg.conf /etc/X11/xorg.conf`	291	`cp -af $CONFIG_FOLDER/xorg.conf /etc/X11/xorg.conf`
295	`if [ "$?" = "0" ]; then`	292	`if [ "$?" = "0" ]; then`
296	`echo "Saved xorg.conf file found."`	293	`echo "Saved xorg.conf file found."`
297	`XDRIVER=""`	294	`XDRIVER=""`
298	`HAVE_XORG_CONF="yes"`	295	`HAVE_XORG_CONF="yes"`
299	`fi`	296	`fi`
300	`fi`	297	`fi`
301		298
302	`### use vesa driver?`	299	`### use vesa driver?`
303	`if [ $VESA ]; then`	300	`if [ $VESA ]; then`
304	`echo "Force to use VESA driver!"`	301	`echo "Force to use VESA driver!"`
305	`video_driver="--set-driver=vesa"`	302	`video_driver="--set-driver=vesa"`
306	`else`	303	`else`
307	`video_driver=""`	304	`video_driver=""`
308	`fi`	305	`fi`
309		306
310	`### force an other video driver?`	307	`### force an other video driver?`
311	`if [ $XDRIVER ]; then`	308	`if [ $XDRIVER ]; then`
312	`echo "Force to use $XDRIVER driver!"`	309	`echo "Force to use $XDRIVER driver!"`
313	`video_driver="--set-driver=$XDRIVER"`	310	`video_driver="--set-driver=$XDRIVER"`
314	`fi`	311	`fi`
315		312
316	`### run system-config-display`	313	`### run system-config-display`
317	`if [ -x /usr/bin/system-config-display ]; then`	314	`if [ -x /usr/bin/system-config-display ]; then`
318	`echo "Configure Xserver:"`	315	`echo "Configure Xserver:"`
319	`if [ ! $HAVE_XORG_CONF ]; then`	316	`if [ ! $HAVE_XORG_CONF ]; then`
320	`if [ ! $SIMPLEX ]; then`	317	`if [ ! $SIMPLEX ]; then`
321	`# default values`	318	`# default values`
322	`[ ! $HSYNC ] && HSYNC="30.0-80.0"`	319	`[ ! $HSYNC ] && HSYNC="30.0-80.0"`
323	`[ ! $VSYNC ] && VSYNC="50.0-90.0"`	320	`[ ! $VSYNC ] && VSYNC="50.0-90.0"`
324	`[ ! $SCREEN ] && SCREEN="1280x1024"`	321	`[ ! $SCREEN ] && SCREEN="1280x1024"`
325		322
326	`system-config-display \`	323	`system-config-display \`
327	`--reconfig \`	324	`--reconfig \`
328	`-v \`	325	`-v \`
329	`--set-resolution=$SCREEN \`	326	`--set-resolution=$SCREEN \`
330	`--set-hsync=$HSYNC \`	327	`--set-hsync=$HSYNC \`
331	`--set-vsync=$VSYNC \`	328	`--set-vsync=$VSYNC \`
332	`$video_driver \| grep Trying`	329	`$video_driver \| grep Trying`
333	`else`	330	`else`
334	`echo "Use simple Xserver configuration."`	331	`echo "Use simple Xserver configuration."`
335	`system-config-display --noui --reconfig -v \| grep Trying`	332	`system-config-display --noui --reconfig -v \| grep Trying`
336	`fi`	333	`fi`
337	`fi`	334	`fi`
338	`fi`	335	`fi`
339		336
340	`### enable NVIDIA driver (needs nvidia, nvidia-libs rpms)`	337	`### enable NVIDIA driver (needs nvidia, nvidia-libs rpms)`
341	`if [ $NVIDIA ] && [ ! $NONVIDIA ]; then`	338	`if [ $NVIDIA ] && [ ! $NONVIDIA ]; then`
342	`# serach for Nvidia Video Card`	339	`# serach for Nvidia Video Card`
343	`/sbin/lspci \| grep VGA \| grep -i -q nvidia`	340	`/sbin/lspci \| grep VGA \| grep -i -q nvidia`
344	`if [ "$?" = "0" ]; then`	341	`if [ "$?" = "0" ]; then`
345	`# lib or lib64 ?`	342	`# lib or lib64 ?`
346	`LIB=lib`	343	`LIB=lib`
347	`[ $( arch ) = "x86_64" ] && LIB=lib64`	344	`[ $( arch ) = "x86_64" ] && LIB=lib64`
348	`# find out installed Nvidia driver version`	345	`# find out installed Nvidia driver version`
349	`libglx=$( ls /usr/X11R6/$LIB/modules/extensions/libglx.so.1.* \| head -n 1 )`	346	`libglx=$( ls /usr/X11R6/$LIB/modules/extensions/libglx.so.1.* \| head -n 1 )`
350	`nvidia_version=${libglx##*.so.1.}`	347	`nvidia_version=${libglx##*.so.1.}`
351	`# enable Nvidia driver (normally done by nvidia-enable - does not work on LiveCD)`	348	`# enable Nvidia driver (normally done by nvidia-enable - does not work on LiveCD)`
352	`echo -n "NVIDIA graphic card found. Enable the nvidia driver ${nvidia_version} ... "`	349	`echo -n "NVIDIA graphic card found. Enable the nvidia driver ${nvidia_version} ... "`
353	`NVLOG=/var/log/nvidia.log`	350	`NVLOG=/var/log/nvidia.log`
354	`# assuming that the kernel modules are already build`	351	`# assuming that the kernel modules are already build`
355	`# link to Nvidia libs`	352	`# link to Nvidia libs`
356	`ln -sf ../../usr/X11R6/$LIB/libGL.so.1.${nvidia_version} /usr/$LIB/libGL.so`	353	`ln -sf ../../usr/X11R6/$LIB/libGL.so.1.${nvidia_version} /usr/$LIB/libGL.so`
357	`ln -sf libGL.so.1.${nvidia_version} /usr/X11R6/$LIB/libGL.so`	354	`ln -sf libGL.so.1.${nvidia_version} /usr/X11R6/$LIB/libGL.so`
358	`mv /usr/X11R6/$LIB/modules/extensions/libGLcore.a /usr/X11R6/$LIB/modules/extensions/xxx.libGLcore.a.saved_by_nvidia`	355	`mv /usr/X11R6/$LIB/modules/extensions/libGLcore.a /usr/X11R6/$LIB/modules/extensions/xxx.libGLcore.a.saved_by_nvidia`
359	`mv /usr/X11R6/$LIB/modules/extensions/libglx.a /usr/X11R6/$LIB/modules/extensions/xxx.libglx.a.saved_by_nvidia`	356	`mv /usr/X11R6/$LIB/modules/extensions/libglx.a /usr/X11R6/$LIB/modules/extensions/xxx.libglx.a.saved_by_nvidia`
360	`ln -sf libglx.so.1.${nvidia_version} /usr/X11R6/$LIB/modules/extensions/libglx.so`	357	`ln -sf libglx.so.1.${nvidia_version} /usr/X11R6/$LIB/modules/extensions/libglx.so`
361	`# reconfigure X`	358	`# reconfigure X`
362	`/usr/sbin/nvidia-xconfig >> $NVLOG 2>&1`	359	`/usr/sbin/nvidia-xconfig >> $NVLOG 2>&1`
363	`if [ $PSI ]; then`	360	`if [ $PSI ]; then`
364	`echo 'NVIDIA=on' >> /etc/sysconfig/cfengine`	361	`echo 'NVIDIA=on' >> /etc/sysconfig/cfengine`
365	`fi`	362	`fi`
366	`echo "ok."`	363	`echo "ok."`
367	`fi`	364	`fi`
368	`fi`	365	`fi`
369		366
370	`### set special video driver options for Intel Mobile`	367	`### set special video driver options for Intel Mobile`
371		368
372	`# (external VGA output: Clone)`	369	`# (external VGA output: Clone)`
373	`if [ $I915GM ] \|\| [ $I855GM ]; then`	370	`if [ $I915GM ] \|\| [ $I855GM ]; then`
374	`sed -e "/Section[ \t]*\"Device\"/,/EndSection/{`	371	`sed -e "/Section[ \t]*\"Device\"/,/EndSection/{`
375	`/^[ \t]Option[ \t]\"MonitorLayout\"/d`	372	`/^[ \t]Option[ \t]\"MonitorLayout\"/d`
376	`/^[ \t]Option[ \t]\"Clone/d`	373	`/^[ \t]Option[ \t]\"Clone/d`
377	`/EndSection/i\\`	374	`/EndSection/i\\`
378	`Option \"MonitorLayout\" \"CRT,LFP\"\\`	375	`Option \"MonitorLayout\" \"CRT,LFP\"\\`
379	`Option \"Clone\" \"1\"\\`	376	`Option \"Clone\" \"1\"\\`
380	`Option \"CloneRefresh\" \"60\"`	377	`Option \"CloneRefresh\" \"60\"`
381	`}" -i /etc/X11/xorg.conf`	378	`}" -i /etc/X11/xorg.conf`
382	`fi`	379	`fi`
383		380
384	`# Set BoardName for Intel 915GM`	381	`# Set BoardName for Intel 915GM`
385	`if [ $I915GM ]; then`	382	`if [ $I915GM ]; then`
386	`sed -i 's/BoardName.VESA driver./BoardName "Intel 915"/' /etc/X11/xorg.conf`	383	`sed -i 's/BoardName.VESA driver./BoardName "Intel 915"/' /etc/X11/xorg.conf`
387	`fi`	384	`fi`
388		385
389		386
390	`### parameter KB = KEYBOARD`	387	`### parameter KB = KEYBOARD`
391	`KEYBOARD=$KB`	388	`KEYBOARD=$KB`
392		389
393	`### ask user for keyboard layout if no keyboard given`	390	`### ask user for keyboard layout if no keyboard given`
394	`if [ -x /usr/bin/system-config-keyboard ]; then`	391	`if [ -x /usr/bin/system-config-keyboard ]; then`
395	`if [ ! $KEYBOARD ]; then`	392	`if [ ! $KEYBOARD ]; then`
396	`MORE_LAYOUTS="more..."`	393	`MORE_LAYOUTS="more..."`
397	`keytables="U.S...........(us) \`	394	`keytables="U.S...........(us) \`
398	`Swiss-German..(sg-latin1) \`	395	`Swiss-German..(sg-latin1) \`
399	`Swiss-French..(fr_CH-latin1) \`	396	`Swiss-French..(fr_CH-latin1) \`
400	`German........(de-latin1) \`	397	`German........(de-latin1) \`
401	`Japanese......(jp106) \`	398	`Japanese......(jp106) \`
402	`$MORE_LAYOUTS"`	399	`$MORE_LAYOUTS"`
403	`PS3="-> "`	400	`PS3="-> "`
404	`echo`	401	`echo`
405	`echo "Please choose keyboard layout (type 1-6):"`	402	`echo "Please choose keyboard layout (type 1-6):"`
406	`select KEYBOARD in $keytables;`	403	`select KEYBOARD in $keytables;`
407	`do`	404	`do`
408	`case $KEYBOARD in`	405	`case $KEYBOARD in`
409	`*)`	406	`*)`
410	`# extract keyboard layout string from $KEYBOARD`	407	`# extract keyboard layout string from $KEYBOARD`
411	`KEYBOARD=${KEYBOARD##*(}`	408	`KEYBOARD=${KEYBOARD##*(}`
412	`KEYBOARD=${KEYBOARD%%)}`	409	`KEYBOARD=${KEYBOARD%%)}`
413	`break`	410	`break`
414	`;;`	411	`;;`
415	`esac`	412	`esac`
416	`done`	413	`done`
417	`fi`	414	`fi`
418	`fi`	415	`fi`
419		416
420	`### set keyboard`	417	`### set keyboard`
421	`if [ -x /usr/bin/system-config-keyboard ]; then`	418	`if [ -x /usr/bin/system-config-keyboard ]; then`
422	`if [ "$KEYBOARD" = "$MORE_LAYOUTS" ]; then`	419	`if [ "$KEYBOARD" = "$MORE_LAYOUTS" ]; then`
423	`system-config-keyboard --text`	420	`system-config-keyboard --text`
424	`else`	421	`else`
425	`echo -n "Set keyboard to '$KEYBOARD', please wait ... "`	422	`echo -n "Set keyboard to '$KEYBOARD', please wait ... "`
426	`system-config-keyboard --noui $KEYBOARD >/dev/null 2>&1`	423	`system-config-keyboard --noui $KEYBOARD >/dev/null 2>&1`
427	`echo "done."`	424	`echo "done."`
428	`fi`	425	`fi`
429	`echo`	426	`echo`
430	`fi`	427	`fi`
431		428
432	`### update AFS users and SEPP links (only for PSI)`	429	`### update AFS users and SEPP links (only for PSI)`
433	`if [ $PSI ] && [ $AFS ]; then`	430	`if [ $PSI ] && [ $AFS ]; then`
434	`echo "Update AFS users and SEPP links..."`	431	`echo "Update AFS users and SEPP links..."`
435	`[ -x /afs/psi.ch/sys/common/update_user.pl ] && /afs/psi.ch/sys/common/update_user.pl >/dev/null 2>&1 &`	432	`[ -x /afs/psi.ch/sys/common/update_user.pl ] && /afs/psi.ch/sys/common/update_user.pl >/dev/null 2>&1 &`
436	`[ -x /afs/psi.ch/sys/common/update_sepp.pl ] && /afs/psi.ch/sys/common/update_sepp.pl >/dev/null 2>&1 &`	433	`[ -x /afs/psi.ch/sys/common/update_sepp.pl ] && /afs/psi.ch/sys/common/update_sepp.pl >/dev/null 2>&1 &`
437	`echo`	434	`echo`
438	`fi`	435	`fi`
439		436
440	`### create local user, if "nolocal" is not set`	437	`### create local user, if "nolocal" is not set`
441	`if [ ! $NOLOCAL ]; then`	438	`if [ ! $NOLOCAL ]; then`
442		439
443	`user=$LOCALUSER`	440	`user=$LOCALUSER`
444	`# execute useradd twice, to make it work (don't know why)`	441	`# execute useradd twice, to make it work (don't know why)`
445	`if [ $PSI ] && [ ! $NOADMIN ]; then`	442	`if [ $PSI ] && [ ! $NOADMIN ]; then`
446	`userdel -r $user 2>/dev/null`	443	`userdel -r $user 2>/dev/null`
447	`useradd -G $LocalAdminGroup $user 2>/dev/null`	444	`useradd -G $LocalAdminGroup $user 2>/dev/null`
448	`userdel -r $user 2>/dev/null`	445	`userdel -r $user 2>/dev/null`
449	`useradd -G $LocalAdminGroup $user`	446	`useradd -G $LocalAdminGroup $user`
450	`else`	447	`else`
451	`userdel -r $user 2>/dev/null`	448	`userdel -r $user 2>/dev/null`
452	`useradd $user 2>/dev/null`	449	`useradd $user 2>/dev/null`
453	`userdel -r $user 2>/dev/null`	450	`userdel -r $user 2>/dev/null`
454	`useradd $user`	451	`useradd $user`
455	`fi`	452	`fi`
456		453
457	`# only for PSI: change users's group to GID=UID+50000`	454	`# only for PSI: change users's group to GID=UID+50000`
458	`if [ $PSI ]; then`	455	`if [ $PSI ]; then`
459	`uid=$( id -u $user )`	456	`uid=$( id -u $user )`
460	`old_gid=$( id -g $user )`	457	`old_gid=$( id -g $user )`
461	`new_gid=$(( $old_gid + 50000 ))`	458	`new_gid=$(( $old_gid + 50000 ))`
462	`# fix /etc/group`	459	`# fix /etc/group`
463	`sed -i "s/${user}:x:${old_gid}:/${user}:x:${new_gid}:/" /etc/group`	460	`sed -i "s/${user}:x:${old_gid}:/${user}:x:${new_gid}:/" /etc/group`
464	`# fix /etc/passwd`	461	`# fix /etc/passwd`
465	`sed -i "s/${user}:x:${uid}:${old_gid}:/${user}:x:${uid}:${new_gid}:/" /etc/passwd`	462	`sed -i "s/${user}:x:${uid}:${old_gid}:/${user}:x:${uid}:${new_gid}:/" /etc/passwd`
466	`# fix perm of /home/${user)`	463	`# fix perm of /home/${user)`
467	`chgrp -R $user /home/${user}`	464	`chgrp -R $user /home/${user}`
468	`fi`	465	`fi`
469	`fi`	466	`fi`
470		467
471	`### copy special files for PSI user l_psi`	468	`### copy special files for PSI user l_psi`
472	`if [ $PSI ] && [ ! $NOLOCAL ]; then`	469	`if [ $PSI ] && [ ! $NOLOCAL ]; then`
473	`find /usr/share/${LOCALUSER}/ -maxdepth 1 -mindepth 1 2>/dev/null \| \`	470	`find /usr/share/${LOCALUSER}/ -maxdepth 1 -mindepth 1 2>/dev/null \| \`
474	`while read dir; do`	471	`while read dir; do`
475	`cp -a $dir /home/${LOCALUSER}/`	472	`cp -a $dir /home/${LOCALUSER}/`
476	`done`	473	`done`
477	`# set owner`	474	`# set owner`
478	`chown -R ${LOCALUSER}.${LOCALUSER} /home/${LOCALUSER}`	475	`chown -R ${LOCALUSER}.${LOCALUSER} /home/${LOCALUSER}`
479	`fi`	476	`fi`
480		477
481	`### set password for root and local user`	478	`### set password for root and local user`
482	`if [ ! $NOPASSWD ]; then`	479	`if [ ! $NOPASSWD ]; then`
483	`if [ ! $NOROOT ] \|\| [ ! $NOLOCAL ]; then`	480	`if [ ! $NOROOT ] \|\| [ ! $NOLOCAL ]; then`
484	`echo -n "Set password for "`	481	`echo -n "Set password for "`
485	`if [ ! $NOROOT ]; then`	482	`if [ ! $NOROOT ]; then`
486	`echo -n "'root' "`	483	`echo -n "'root' "`
487	`fi`	484	`fi`
488	`if [ ! $NOROOT ] && [ ! $NOLOCAL ]; then`	485	`if [ ! $NOROOT ] && [ ! $NOLOCAL ]; then`
489	`echo -n "and "`	486	`echo -n "and "`
490	`fi`	487	`fi`
491	`if [ ! $NOLOCAL ]; then`	488	`if [ ! $NOLOCAL ]; then`
492	`echo -n "local user '$user' "`	489	`echo -n "local user '$user' "`
493	`fi`	490	`fi`
494	`echo`	491	`echo`
495		492
496	`if [ ! $NOLOCAL ]; then`	493	`if [ ! $NOLOCAL ]; then`
497	`echo "Login as local user '$user' with this password."`	494	`echo "Login as local user '$user' with this password."`
498	`echo`	495	`echo`
499	`fi`	496	`fi`
500		497

Subversion Repositories livecd

(root)/trunk/customize/runlast @ 56 – Rev 43 → 48