WebSVN – livecd – Diff – /trunk/customize/runlast


#!/bin/bash
#
# Fix things during bootup - run last 
# called at the end of /etc/rc.d/rc.local
#
# Urs Beyerle
#
 
### -----------------------------------------------------------
### definitions
### -----------------------------------------------------------
 
# dir of mounted live system: /$MOUNTDIR/live
MOUNTDIR=livecd
 
# source functions
. /$MOUNTDIR/live/liblinuxlive
. /etc/init.d/functions
 
# defaults for xorg.conf
XORG_CONF=/etc/X11/xorg.conf
 
HSYNC_DEFAULT="30.0-80.0"
VSYNC_DEFAULT="50.0-90.0"
SCREEN_DEFAULT="1400x1050"
 
MODES_DEFAULT='"2048x1536" "1920x1200" "1600x1200" "1400x1050" "1280x1024" "1280x960" "1280x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"'
 
 
### -----------------------------------------------------------
### Get boot parameters
### -----------------------------------------------------------
 
# root on NFS?
NFSROOT=$( cmdline_value nfsroot )
 
# NFS Server
NFSSERVER=$( echo $NFSROOT | cut -d":" -f1 )
 
# no local user?
NOLOCAL=$( cmdline_parameter nolocal )
 
# no root user?
NOROOT=$( cmdline_parameter noroot )
 
# no localadmin?
NOADMIN=$( cmdline_parameter noadmin )
LocalAdminGroup=localadmin
 
# set password
PASSWD=$( cmdline_value passwd )
[ ! $PASSWD ] && PASSWD=$( cmdline_value pw )
 
# no password = empty password
NOPASSWD=$( cmdline_parameter nopasswd )
 
# keyboard layout (kb= or keyboard=)
KEYBOARD=$( cmdline_value keyboard )
KB=$( cmdline_value kb )
 
# PSI setup?
PSI=$( cmdline_parameter psi )
 
# cups server
CUPS=$( cmdline_value cups )
 
# failsafe X server
SIMPLEX=$( cmdline_parameter simplex )
 
# NVIDIA driver
NVIDIA=$( cmdline_parameter nvidia )
[ "$XDRIVER" = "nvidia" ] && NVIDIA=nvidia
 
# force NO NVIDIA driver - will overwite NVIDIA option
NONVIDIA=$( cmdline_parameter nonvidia )
 
# VESA driver
VESA=$( cmdline_parameter vesa )
 
# force to use a video driver ?
XDRIVER=$( cmdline_value xdriver )
 
# Xserver configurations
HSYNC=$( cmdline_value hsync )
VSYNC=$( cmdline_value vsync )
SCREEN=$( cmdline_value screen )
 
# no SWAP
NOSWAP=$( cmdline_parameter noswap )
 
# should we auto mount all found devices?
AUTOMOUNT=$( cmdline_parameter automount )
if [ $AUTOMOUNT ]; then
    MOUNTOPT="auto,users"
else
    MOUNTOPT="noauto,users"
fi
 
# should we read only mount all found devices?
ROMOUNT=$( cmdline_parameter romount )
[ $ROMOUNT ] && MOUNTOPT="$MOUNTOPT,ro"
 
# folder where we find data which was previously stored
# (can be on an usbstick or harddisk partition)
SAVEFOLDER=SL_LIVECD
 
# local home partition?
# (e.g. /dev/hda1, /dev/hda1:/my_home)
HOMELOCAL=$( cmdline_value home )
 
# fast booting?
FASTBOOT=$( cmdline_parameter fastboot )
 
# start afs?
AFS=$( cmdline_parameter afs )
 
# or force no afs
[ $( cmdline_parameter noafs ) ] && AFS=""
 
# turn of sound (volume=0)
NOSOUND=$( cmdline_parameter nosound )
 
# local user name?
LOCALUSER=$( cmdline_value user )
 
# hostname?
HOSTNAME=$( cmdline_value hostname )
 
# do we have defined a configuration directory?
CONFIG=$( cmdline_value config )
 
# do not update fstab?
NOFSTAB=$( cmdline_parameter nofstab )
 
# kde/gnome as desktop
GNOME=$( cmdline_parameter gnome )
KDE=$( cmdline_parameter kde )
 
# do no fixes (useful for debugging)
NOFIX=$( cmdline_parameter nofix )
 
# do not start network
NONET=$( cmdline_parameter nonet )
 
 
 
### -----------------------------------------------------------
### Functions
### -----------------------------------------------------------
 
reload_soundmodule() {
 
    ### unload/load sound module for snd-card-X (timing problem?)
    if [ ! $NOFIX ]; then
	rpm -q alsa-lib | grep el5 >/dev/null
	if [ "$?" = "0" ]; then
	    # disable kernel messages
	    echo "0" > /proc/sys/kernel/printk
	    sound_modules=$( grep snd-card- /etc/modprobe.conf | awk ' $1 ~ /alias/ { print $3 }' | tr - _ )
	    for module in $sound_modules; do
		lsmod | awk '{ print $1 }' | grep $module >/dev/null 2>&1
		if [ "$?" = "0" ]; then
		    rmmod $module    >/dev/null 2>&1
		    modprobe $module >/dev/null 2>&1
		fi
	    done
	    # enable kernel messages
	    echo "6" > /proc/sys/kernel/printk
	fi
    fi
}
 
 
### -----------------------------------------------------------
### Improved hardware detection
### -----------------------------------------------------------
 
### Improved graphic card detection
 
if [ ! $SIMPLEX ] && [ ! $NOFIX ]; then
 
    ### Intel Mobile 915GM
    lspci | grep -q VGA.*Intel.*Mobile.*915GM
    if [ "$?" = "0" ]; then
	I915GM=i915gm
	[ $XDRIVER ] || XDRIVER=i810
    fi
 
    ### Intel Mobile 855GM
    lspci | grep -q VGA.*Intel.*855GM
    if [ "$?" = "0" ]; then
	I855GM=i855gm
    fi
fi
 
 
### -----------------------------------------------------------
### Main
### -----------------------------------------------------------
 
### try to load fuse kernel module
modprobe fuse 2>/dev/null
 
### reload sound module (first time)
reload_soundmodule
 
### activate SWAP
# delete all swap lines in fstab
 sed -i -e "/ swap /d" /etc/fstab
# search for swap partition
fdisk -l > /var/log/fdisk
swap_part=$( fdisk -l 2>/dev/null | grep -i "Linux swap" \
            | grep "^/dev/" | cut -f 1 -d " " | head -1 )
# add to /etc/fstab and activate SWAP
if [ $swap_part ] && [ ! $NOSWAP ]; then
    echo "$swap_part               swap                    swap    defaults 0 0" >>/etc/fstab
    # activate SWAP
    swapoff -a
    swapon -a -e
fi
 
### MAC Address of eth0
MAC_ETH0=$( ifconfig | grep eth0 | awk '{print $5}' )
 
### Get CONFIG_FOLDER for this machine from NFS Server (if existing) 
#   and copy it to /$MOUNTDIR
if [ $NFSSERVER ] && [ $CONFIG ]; then
    mkdir -p /mnt/config
    echo "Search for configuration files on the server ..."
    /etc/init.d/portmap start >/dev/null
    mount -t nfs $NFSSERVER:$CONFIG /mnt/config 2>/dev/null
    if [ "$?" != "0" ]; then
	echo "Could not mount $NFSSERVER:$CONFIG."
    else
	if [ -d /mnt/config/$MAC_ETH0 ]; then
	    CONFIG_FOLDER=/$MOUNTDIR/config
	    mkdir -p $CONFIG_FOLDER
	    cp -a /mnt/config/$MAC_ETH0/* /$CONFIG_FOLDER/ 2>/dev/null
	    if [ "$?" != "0" ]; then
		echo "Could not get $NFSSERVER:$CONFIG/$MAC_ETH0"
		CONFIG_FOLDER=""
	    else
		echo "Found configuration files on the server." 
	    fi	    
	fi
	umount /mnt/config
    fi
    /etc/init.d/portmap stop >/dev/null
fi
 
### search for partitions and update fstab 
### and look for $SAVEFOLDER (previously stored data)
if [ ! $FASTBOOT ] && [ ! $NOFSTAB ]; then
    echo "Update /etc/fstab ..."
    # disable kernel messages during mount/unmount
    echo 0 > /proc/sys/kernel/printk
    DEVICES=$( list_partition_devices )
    for DEVICE in $DEVICES; do
        # try to mount the device and unmount it. 
        # If OK, we can add it to fstab
	DEV=$( basename $DEVICE )
	mkdir -p /mnt/$DEV
	mount $DEVICE /mnt/$DEV >/dev/null 2>&1
	# search for $SAVEFOLDER
	if [ -d /mnt/$DEV/$SAVEFOLDER ]; then
	    FOUND_RESTORE_DEV=/dev/$DEV
	    echo "Found folder '$SAVEFOLDER' on $FOUND_RESTORE_DEV"
	fi
	# unmount again
	umount /mnt/$DEV >/dev/null 2>&1
	# if sucsessful add to fstab, if not already in fstab
	if [ "$?" = "0" ]; then
	    grep -q "^$DEVICE " /etc/fstab
	    if [ "$?" != "0" ]; then
		echo -e "$DEVICE \t /mnt/$DEV \t auto \t $MOUNTOPT,suid,dev,exec 0 0" >> /etc/fstab
	    fi
	else
	    rmdir /mnt/$DEV 2>/dev/null
	fi
    done
    # enable kernel messages again
    echo 6 > /proc/sys/kernel/printk
fi
 
### if $SAVEFOLDER found, set $CONFIG_FOLDER and mount $FOUND_RESTORE_MNT 
if [ $FOUND_RESTORE_DEV ]; then
    FOUND_RESTORE_MNT=$( grep "^$FOUND_RESTORE_DEV " /etc/fstab | awk '{ print $2 }' )
    CONFIG_FOLDER=$FOUND_RESTORE_MNT/$SAVEFOLDER
    echo "Will restore data from $CONFIG_FOLDER"
    mount $FOUND_RESTORE_MNT
fi
 
### source the file "config", if found in $CONFIG_FOLDER
if [ -f $CONFIG_FOLDER/config ]; then
    . $CONFIG_FOLDER/config
fi
 
### do we have a shadow/passwd file in $FOUND_FOULDER 
if [ -r $CONFIG_FOLDER/passwd.tar.gz ] && [ -r $CONFIG_FOLDER/shadow.tar.gz ]; then
    # we do not need a password for local user and root
    NOLOCAL=nolocal
    NOROOT=noroot
fi
 
### set local user name and default hostname
if [ $PSI ]; then
    [ $LOCALUSER ] || LOCALUSER=l_psi
    DEFAULT_HOSTNAME=psi
else
    [ $LOCALUSER ] || LOCALUSER=sluser
    DEFAULT_HOSTNAME=slinux
fi
 
### check for xorg.conf in CONFIG_FOLDER
if [ -r $CONFIG_FOLDER/xorg.conf ]; then
    cp -af $CONFIG_FOLDER/xorg.conf $XORG_CONF
    if [ "$?" = "0" ]; then
	echo "Saved xorg.conf file found."
	XDRIVER=""
	HAVE_XORG_CONF="yes"
    fi
fi
 
### use vesa driver?
if [ $VESA ]; then
    echo "Force to use VESA driver!"
    video_driver="--set-driver=vesa"
else
    video_driver=""
fi
 
### force an other video driver?
if [ $XDRIVER ]; then
    echo "Force to use $XDRIVER driver!"
    video_driver="--set-driver=$XDRIVER"
fi
 
### configure Xserver
if [ -x /usr/bin/system-config-display ]; then
    echo "Configure Xserver:"
    if [ ! $HAVE_XORG_CONF ]; then
	if [ ! $SIMPLEX ]; then
 
            # default values
	    [ ! $HSYNC ]  && HSYNC="$HSYNC_DEFAULT"
	    [ ! $VSYNC ]  && VSYNC="$VSYNC_DEFAULT"
	    [ ! $SCREEN ] && SCREEN="$SCREEN_DEFAULT"
	    
            # run system-config-display 
	    system-config-display \
		--reconfig \
                -v \
		--set-resolution=$SCREEN \
		--set-hsync=$HSYNC \
		--set-vsync=$VSYNC \
		$video_driver | grep Trying
 
            # system-config-display in SL5 does not work nicely :-(
            # e.g. No Monitor Section
 
	    # add Monitor Section and add Monitor0 to Screen Section
	    grep -q Monitor $XORG_CONF
	    if [ "$?" != "0" ]; then
		echo    "Section \"Monitor\""          >> $XORG_CONF
		echo -e "\tIdentifier   \"Monitor0\""  >> $XORG_CONF
		echo -e "\tHorizSync    $HSYNC"        >> $XORG_CONF
		echo -e "\tVertRefresh  $VSYNC"        >> $XORG_CONF
		echo -e "\tOption       \"dpms\""      >> $XORG_CONF
		echo -e "EndSection"                   >> $XORG_CONF
                sed -i "s|Device     \"Videocard0\"|Device     \"Videocard0\"\n\tMonitor    \"Monitor0\"|" $XORG_CONF
	    fi
 
            # add Modes for $SCREEN, if not yet there
	    grep -q Modes $XORG_CONF
	    if [ "$?" != "0" ]; then
		modeline=$( echo ${MODES_DEFAULT} | sed "s|.*\"$SCREEN|\"$SCREEN|" )
		if [ "$modeline" ]; then
		    sed -i "s|\tDepth.*|\tDepth     24\n\t\tModes $modeline|" $XORG_CONF
		fi
	    fi
 
 
	# simple Xserver configuration.
	else
	    echo "Use simple Xserver configuration."
	    system-config-display --noui --reconfig -v | grep Trying
	fi
    fi
fi
 
### enable nvidia driver
if [ $NVIDIA ] && [ ! $NONVIDIA ]; then
    # serach for Nvidia Video Card
    /sbin/lspci | grep VGA | grep -i -q nvidia
    if [ "$?" = "0" ]; then
	# nvidia-x11-drv installed?
	which nvidia-xconfig >/dev/null 2>&1
	if [ "$?" = "0" ]; then
	    echo "Enable nvidia driver."
	    # set driver to nv in case it's only vesa
	    sed -i 's|"vesa"|"nv"|' /etc/X11/xorg.conf
	    # configure for nvidia driver
	    nvidia-xconfig >/dev/null 2>&1
            nvidia-config-display enable
	else
	    echo "Nvidia driver not found."
	fi
    fi
fi
 
### set special video driver options for Intel Mobile
 
#   (external VGA output: Clone)
if [ $I915GM ] || [ $I855GM ]; then
    sed -e "/Section[ \t]*\"Device\"/,/EndSection/{
     /^[ \t]*Option[ \t]*\"MonitorLayout\"/d
     /^[ \t]*Option[ \t]*\"Clone/d
     /EndSection/i\\
        Option      \"MonitorLayout\" \"CRT,LFP\"\\
        Option      \"Clone\" \"1\"\\
        Option      \"CloneRefresh\" \"60\"
     }" -i $XORG_CONF
fi
 
# Set BoardName for Intel 915GM
if [ $I915GM ]; then
    sed -i 's/BoardName.*VESA driver.*/BoardName   "Intel 915"/' $XORG_CONF
fi
 
 
### parameter KB = KEYBOARD
KEYBOARD=$KB
 
### ask user for keyboard layout if no keyboard given
if [ -x /usr/bin/system-config-keyboard ]; then
    if [ ! $KEYBOARD ]; then
	MORE_LAYOUTS="more..."
	keytables="U.S...........(us) \
	           Swiss-German..(sg-latin1) \
                   Swiss-French..(fr_CH-latin1) \
                   German........(de-latin1) \
                   Japanese......(jp106) \
                   $MORE_LAYOUTS"
	PS3="-> "
	echo
	echo "Please choose keyboard layout (type 1-6):"
	select KEYBOARD in $keytables;
	  do
	     case $KEYBOARD in
	        *)
	        # extract keyboard layout string from $KEYBOARD
	        KEYBOARD=${KEYBOARD##*(}
                KEYBOARD=${KEYBOARD%%)}
                break
                ;;
	     esac
	  done
    fi
fi
 
### set keyboard
if [ -x /usr/bin/system-config-keyboard ]; then
    if [ "$KEYBOARD" = "$MORE_LAYOUTS" ]; then
	system-config-keyboard --text
    else
	echo -n "Set keyboard to '$KEYBOARD', please wait ... "
	system-config-keyboard --noui $KEYBOARD >/dev/null 2>&1
	echo "done."
    fi
    echo
fi
 
### update AFS users and SEPP (only for PSI)
if [ $PSI ] && [ $AFS ]; then
    echo "Update AFS users..."
    [ -x /afs/psi.ch/sys/common/update_user.pl ] && /afs/psi.ch/sys/common/update_user.pl >/dev/null 2>&1 &
    if [ -d /usr/pack ]; then
	echo "Update SEPP links..."
	[ -x /afs/psi.ch/sys/common/update_sepp.pl ] && /afs/psi.ch/sys/common/update_sepp.pl >/dev/null 2>&1 &
    fi
    echo
fi
 
### create local user, if "nolocal" is not set 
if [ ! $NOLOCAL ]; then
 
    user=$LOCALUSER
 
    if [ $PSI ] && [ ! $NOADMIN ]; then
 
	groupadd $user   2>/dev/null
 
 
 
 
 
 
        # add user to fuse group ?
	grep -q "^fuse:" /etc/group
	if [ "$?" = "0" ]; then
	    useradd -g $user -G ${LocalAdminGroup},fuse $user  2>/dev/null
	else
	    useradd -g $user -G ${LocalAdminGroup} $user       2>/dev/null
	fi
    else
 
	groupadd $user  2>/dev/null
 
 
        # add user to fuse group ?
	grep -q "^fuse:" /etc/group
	if [ "$?" = "0" ]; then
	    useradd -g $user -G fuse $user  2>/dev/null
	else
	    useradd -g $user $user          2>/dev/null
	fi
    fi
 
fi
 
### copy special files for PSI user l_psi
if [ $PSI ] && [ ! $NOLOCAL ]; then
    find /usr/share/${LOCALUSER}/ -maxdepth 1 -mindepth 1 2>/dev/null | \
    while read dir; do 
	cp -a $dir /home/${LOCALUSER}/
    done
    # set owner
    chown -R ${LOCALUSER}.${LOCALUSER} /home/${LOCALUSER}
fi
 
### autostart kmix and krandrtray in KDE
if [ ! $NOLOCAL ]; then
    mkdir -p /home/${LOCALUSER}/.kde/Autostart
    cp -a /usr/share/applications/kde/krandrtray.desktop /home/${LOCALUSER}/.kde/Autostart 2>/dev/null
    cp -a /usr/share/applications/kde/kmix.desktop /home/${LOCALUSER}/.kde/Autostart 2>/dev/null
    chown -R ${LOCALUSER}.${LOCALUSER} /home/${LOCALUSER}/.kde/Autostart
fi
 
 
### first set empty password
if [ ! $NOROOT ]; then
    sed -i "s|^root:.*|root::12345:0:99999:1:::|" /etc/shadow
fi
if [ ! $NOLOCAL]; then
    sed -i "s|^$LOCALUSER:.*|$LOCALUSER::12345:0:99999:1:::|" /etc/shadow
fi
 
### set password for root and local user
if [ ! $NOPASSWD ]; then
    if [ ! $NOROOT ] || [ ! $NOLOCAL ]; then
	echo -n "Set password for "
	if [ ! $NOROOT ]; then
	    echo -n "'root' "
	fi
	if [ ! $NOROOT ] && [ ! $NOLOCAL ]; then
	    echo -n "and "
	fi
	if [ ! $NOLOCAL ]; then
	    echo -n "local user '$user' "
	fi
	echo
	echo "or hit return for empty password."
 
	if [ ! $NOLOCAL ]; then
	    echo "Login as local user '$user' with this password."
	fi
	echo
 
        # ask for password, if not yet given by $PASSWD
	if [ ! $PASSWD ]; then 
	    echo -n "Password: "
	    read -s PASSWD
	    echo
	fi
 
	# set password - or - set empty password
	if [ ! $NOROOT ] && [ "$PASSWD" ]; then
	    echo $PASSWD | passwd --stdin root >/dev/null
	fi
	if [ ! $NOLOCAL] && [ "$PASSWD" ]; then
	    echo $PASSWD | passwd --stdin $user >/dev/null
	fi
	echo
    fi
fi
 
### try to get hostname from DNS, if not yet defined
if [ ! $HOSTNAME ]; then
    echo "Try to get hostname from DNS ..."
    IP=$( /sbin/ip add show dev eth0 2>/dev/null | grep "inet " | cut -d" " -f6 | sed 's|/.*||' )
    if [ "$IP" = "" ]; then
	IP=$( /sbin/ip add show dev eth1 2>/dev/null | grep "inet " | cut -d" " -f6 | sed 's|/.*||' )
    fi
    if [ "$IP" != "" ]; then
	host -W 1 $IP >/dev/null 2>&1
	if [ "$?" = "0" ]; then
	    HOSTNAME=$( host -W 1 $IP | cut -d" " -f 5 | cut -d"." -f 1 )
	    if [ "$HOSTNAME" = "3(NXDOMAIN)" ]; then
		HOSTNAME=$DEFAULT_HOSTNAME
	    fi	
	    if [ "$HOSTNAME" = "no" ]; then
		HOSTNAME=$DEFAULT_HOSTNAME
	    fi	
	fi
    fi
fi
 
### define default hostname, if $HOSTNAME is still not yet set
if [ ! $HOSTNAME ]; then
    HOSTNAME=$DEFAULT_HOSTNAME
fi
 
### set hostname
export HOSTNAME=$HOSTNAME
hostname $HOSTNAME
sed -i "s/HOSTNAME=.*/HOSTNAME=${HOSTNAME}/" /etc/sysconfig/network
if [ $PSI ]; then
    sed -i "s/hostname=.*/hostname=${HOSTNAME}.psi.ch/" /etc/ssmtp/ssmtp.conf
    sed -i "s/HOSTNAME=.*/HOSTNAME=${HOSTNAME}/" /etc/sysconfig/psi
fi
for iface in eth0 eth1 eth2 eth3; do
    if [ -e /etc/sysconfig/network-scripts/ifcfg-${iface} ]; then
	echo "DHCP_HOSTNAME=${HOSTNAME}" >> /etc/sysconfig/network-scripts/ifcfg-${iface}
    fi
done
 
echo "Hostname set to: $HOSTNAME"
echo
 
### set cups server
if [ $CUPS ]; then
    sed -i "s|.*ServerName .*|ServerName  $CUPS|" /etc/cups/client.conf
    grep -q ServerName /etc/cups/client.conf || echo "ServerName  $CUPS" >> /etc/cups/client.conf 
fi
 
### some magic: just access this file in order that it can be sourced later
ls -lag /etc/X11/xinit/xinitrc-common >/dev/null 2>&1
 
### set keyboard for rdesktop
if [ -e $XORG_CONF ]; then
    grep -q de_CH $XORG_CONF && RDESKTOP_OPT="-k de-ch"
    grep -q fr_CH $XORG_CONF && RDESKTOP_OPT="-k fr-ch"
    grep -q jp106 $XORG_CONF && RDESKTOP_OPT="-k ja"
fi
 
if [ "$RDESKTOP_OPT" ]; then
    echo "alias rdesktop='rdesktop $RDESKTOP_OPT'" > /etc/profile.d/rdesktop.sh
    echo "export RDESKTOP_OPT='$RDESKTOP_OPT'" >> /etc/profile.d/rdesktop.sh
    chmod 755 /etc/profile.d/rdesktop.sh
fi
 
### run setup script, if found in $CONFIG_FOLDER on $FOUND_RESTORE_MNT
if [ -r $CONFIG_FOLDER/setup ]; then
    CONFIG_FOLDER=$CONFIG_FOLDER bash $CONFIG_FOLDER/setup
fi
 
### umount $FOUND_RESTORE_MNT
if [ $FOUND_RESTORE_MNT ]; then
    echo "Unmount $FOUND_RESTORE_MNT"
    umount $FOUND_RESTORE_MNT 2>/dev/null
    sleep 3
fi
 
### local home partition?
if [ $HOMELOCAL ]; then
    mv /home /home.old
    mkdir -p /mnt/home_par
    # which partition? which folder?
    HOMEPAR=$( echo $HOMELOCAL | cut -d":" -f1 )
    HOMEDIR=$( echo $HOMELOCAL | grep ":" | cut -d":" -f2 )
    umount $HOMEPAR 2>/dev/null
    # mount it with option noatime, healthy for USB flash drives
    mount -o noatime -rw $HOMEPAR /mnt/home_par 2>/dev/null
    if [ "$?" != "0" ]; then
	echo "ERROR: Could not mount read/write $HOMEPAR"
	umount $HOMEPAR >/dev/null 2&>1
	mv /home.old /home
    else
	echo "$HOMEPAR mounted on /mnt/home_par"
	# link to new home
	ln -s /mnt/home_par/$HOMEDIR /home
	if [ ! -d /mnt/home_par/$HOMEDIR ]; then
	    echo "$HOMELOCAL not found on $HOMEPAR"
	    echo mkdir -p /mnt/home_par/$HOMEDIR
	    if [ "$?" != "0" ]; then
		echo "ERROR: Could not create $HOMELOCAL on $HOMEPAR"
		umount $HOMEPAR >/dev/null 2&>1
		rm -f /home
		mv /home.old /home
	    else
		echo "Folder $HOMEDIR created on $HOMEPAR"
	    fi
	fi
	if [ -d /mnt/home_par/$HOMEDIR ]; then
	    echo "/home is linked to /mnt/home_par${HOMEDIR}"
	    # copy files from /home.old to /home, which are not yet there
	    /bin/cp -a -i --reply=no /home.old/* /home/ 
	    rm -rf /home.old
	fi
    fi
    sleep 2
fi
 
### mount all if AUTOMOUNT set
if [ $AUTOMOUNT ]; then
    mount -a
fi
 
### unmute all mixers and set volumes
if [ -x /usr/bin/set-volume ]; then 
    if [ $NOSOUND ]; then
	/usr/bin/set-volume 0 > /var/log/set-volume.log 2>&1 &
    else
	/usr/bin/set-volume 60 > /var/log/set-volume.log 2>&1 &
    fi
fi
 
### set kde or gnome as desktop
if [ $KDE ]; then
    sed -i "/^DESKTOP=.*/d" /etc/sysconfig/desktop 2&>/dev/null
    echo "DESKTOP=KDE" >> /etc/sysconfig/desktop
fi
if [ $GNOME ]; then
    sed -i "/^DESKTOP=.*/d" /etc/sysconfig/desktop 2&>/dev/null
    echo "DESKTOP=GNOME" >> /etc/sysconfig/desktop
fi
 
### reload sound module (second time)
reload_soundmodule
 
### bring up all network interfaces (useful to enable WLAN devices)
if [ ! $NONET ]; then
    devices=$( ls /etc/sysconfig/network-scripts/ifcfg-* \
               | sed "s|/etc/sysconfig/network-scripts/ifcfg-||" | grep -v lo )
    for device in $devices; do
	ifconfig $device up > /dev/null 2>&1 &
    done
fi
 

Rev 169	Rev 172
1	`#!/bin/bash`	1	`#!/bin/bash`
2	`#`	2	`#`
3	`# Fix things during bootup - run last`	3	`# Fix things during bootup - run last`
4	`# called at the end of /etc/rc.d/rc.local`	4	`# called at the end of /etc/rc.d/rc.local`
5	`#`	5	`#`
6	`# Urs Beyerle`	6	`# Urs Beyerle`
7	`#`	7	`#`
8		8
9	`### -----------------------------------------------------------`	9	`### -----------------------------------------------------------`
10	`### definitions`	10	`### definitions`
11	`### -----------------------------------------------------------`	11	`### -----------------------------------------------------------`
12		12
13	`# dir of mounted live system: /$MOUNTDIR/live`	13	`# dir of mounted live system: /$MOUNTDIR/live`
14	`MOUNTDIR=livecd`	14	`MOUNTDIR=livecd`
15		15
16	`# source functions`	16	`# source functions`
17	`. /$MOUNTDIR/live/liblinuxlive`	17	`. /$MOUNTDIR/live/liblinuxlive`
18	`. /etc/init.d/functions`	18	`. /etc/init.d/functions`
19		19
20	`# defaults for xorg.conf`	20	`# defaults for xorg.conf`
21	`XORG_CONF=/etc/X11/xorg.conf`	21	`XORG_CONF=/etc/X11/xorg.conf`
22		22
23	`HSYNC_DEFAULT="30.0-80.0"`	23	`HSYNC_DEFAULT="30.0-80.0"`
24	`VSYNC_DEFAULT="50.0-90.0"`	24	`VSYNC_DEFAULT="50.0-90.0"`
25	`SCREEN_DEFAULT="1400x1050"`	25	`SCREEN_DEFAULT="1400x1050"`
26		26
27	`MODES_DEFAULT='"2048x1536" "1920x1200" "1600x1200" "1400x1050" "1280x1024" "1280x960" "1280x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"'`	27	`MODES_DEFAULT='"2048x1536" "1920x1200" "1600x1200" "1400x1050" "1280x1024" "1280x960" "1280x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"'`
28		28
29		29
30	`### -----------------------------------------------------------`	30	`### -----------------------------------------------------------`
31	`### Get boot parameters`	31	`### Get boot parameters`
32	`### -----------------------------------------------------------`	32	`### -----------------------------------------------------------`
33		33
34	`# root on NFS?`	34	`# root on NFS?`
35	`NFSROOT=$( cmdline_value nfsroot )`	35	`NFSROOT=$( cmdline_value nfsroot )`
36		36
37	`# NFS Server`	37	`# NFS Server`
38	`NFSSERVER=$( echo $NFSROOT \| cut -d":" -f1 )`	38	`NFSSERVER=$( echo $NFSROOT \| cut -d":" -f1 )`
39		39
40	`# no local user?`	40	`# no local user?`
41	`NOLOCAL=$( cmdline_parameter nolocal )`	41	`NOLOCAL=$( cmdline_parameter nolocal )`
42		42
43	`# no root user?`	43	`# no root user?`
44	`NOROOT=$( cmdline_parameter noroot )`	44	`NOROOT=$( cmdline_parameter noroot )`
45		45
46	`# no localadmin?`	46	`# no localadmin?`
47	`NOADMIN=$( cmdline_parameter noadmin )`	47	`NOADMIN=$( cmdline_parameter noadmin )`
48	`LocalAdminGroup=localadmin`	48	`LocalAdminGroup=localadmin`
49		49
50	`# set password`	50	`# set password`
51	`PASSWD=$( cmdline_value passwd )`	51	`PASSWD=$( cmdline_value passwd )`
52	`[ ! $PASSWD ] && PASSWD=$( cmdline_value pw )`	52	`[ ! $PASSWD ] && PASSWD=$( cmdline_value pw )`
53		53
54	`# no password = empty password`	54	`# no password = empty password`
55	`NOPASSWD=$( cmdline_parameter nopasswd )`	55	`NOPASSWD=$( cmdline_parameter nopasswd )`
56		56
57	`# keyboard layout (kb= or keyboard=)`	57	`# keyboard layout (kb= or keyboard=)`
58	`KEYBOARD=$( cmdline_value keyboard )`	58	`KEYBOARD=$( cmdline_value keyboard )`
59	`KB=$( cmdline_value kb )`	59	`KB=$( cmdline_value kb )`
60		60
61	`# PSI setup?`	61	`# PSI setup?`
62	`PSI=$( cmdline_parameter psi )`	62	`PSI=$( cmdline_parameter psi )`
63		63
64	`# cups server`	64	`# cups server`
65	`CUPS=$( cmdline_value cups )`	65	`CUPS=$( cmdline_value cups )`
66		66
67	`# failsafe X server`	67	`# failsafe X server`
68	`SIMPLEX=$( cmdline_parameter simplex )`	68	`SIMPLEX=$( cmdline_parameter simplex )`
69		69
70	`# NVIDIA driver`	70	`# NVIDIA driver`
71	`NVIDIA=$( cmdline_parameter nvidia )`	71	`NVIDIA=$( cmdline_parameter nvidia )`
72	`[ "$XDRIVER" = "nvidia" ] && NVIDIA=nvidia`	72	`[ "$XDRIVER" = "nvidia" ] && NVIDIA=nvidia`
73		73
74	`# force NO NVIDIA driver - will overwite NVIDIA option`	74	`# force NO NVIDIA driver - will overwite NVIDIA option`
75	`NONVIDIA=$( cmdline_parameter nonvidia )`	75	`NONVIDIA=$( cmdline_parameter nonvidia )`
76		76
77	`# VESA driver`	77	`# VESA driver`
78	`VESA=$( cmdline_parameter vesa )`	78	`VESA=$( cmdline_parameter vesa )`
79		79
80	`# force to use a video driver ?`	80	`# force to use a video driver ?`
81	`XDRIVER=$( cmdline_value xdriver )`	81	`XDRIVER=$( cmdline_value xdriver )`
82		82
83	`# Xserver configurations`	83	`# Xserver configurations`
84	`HSYNC=$( cmdline_value hsync )`	84	`HSYNC=$( cmdline_value hsync )`
85	`VSYNC=$( cmdline_value vsync )`	85	`VSYNC=$( cmdline_value vsync )`
86	`SCREEN=$( cmdline_value screen )`	86	`SCREEN=$( cmdline_value screen )`
87		87
88	`# no SWAP`	88	`# no SWAP`
89	`NOSWAP=$( cmdline_parameter noswap )`	89	`NOSWAP=$( cmdline_parameter noswap )`
90		90
91	`# should we auto mount all found devices?`	91	`# should we auto mount all found devices?`
92	`AUTOMOUNT=$( cmdline_parameter automount )`	92	`AUTOMOUNT=$( cmdline_parameter automount )`
93	`if [ $AUTOMOUNT ]; then`	93	`if [ $AUTOMOUNT ]; then`
94	`MOUNTOPT="auto,users"`	94	`MOUNTOPT="auto,users"`
95	`else`	95	`else`
96	`MOUNTOPT="noauto,users"`	96	`MOUNTOPT="noauto,users"`
97	`fi`	97	`fi`
98		98
99	`# should we read only mount all found devices?`	99	`# should we read only mount all found devices?`
100	`ROMOUNT=$( cmdline_parameter romount )`	100	`ROMOUNT=$( cmdline_parameter romount )`
101	`[ $ROMOUNT ] && MOUNTOPT="$MOUNTOPT,ro"`	101	`[ $ROMOUNT ] && MOUNTOPT="$MOUNTOPT,ro"`
102		102
103	`# folder where we find data which was previously stored`	103	`# folder where we find data which was previously stored`
104	`# (can be on an usbstick or harddisk partition)`	104	`# (can be on an usbstick or harddisk partition)`
105	`SAVEFOLDER=SL_LIVECD`	105	`SAVEFOLDER=SL_LIVECD`
106		106
107	`# local home partition?`	107	`# local home partition?`
108	`# (e.g. /dev/hda1, /dev/hda1:/my_home)`	108	`# (e.g. /dev/hda1, /dev/hda1:/my_home)`
109	`HOMELOCAL=$( cmdline_value home )`	109	`HOMELOCAL=$( cmdline_value home )`
110		110
111	`# fast booting?`	111	`# fast booting?`
112	`FASTBOOT=$( cmdline_parameter fastboot )`	112	`FASTBOOT=$( cmdline_parameter fastboot )`
113		113
114	`# start afs?`	114	`# start afs?`
115	`AFS=$( cmdline_parameter afs )`	115	`AFS=$( cmdline_parameter afs )`
116		116
117	`# or force no afs`	117	`# or force no afs`
118	`[ $( cmdline_parameter noafs ) ] && AFS=""`	118	`[ $( cmdline_parameter noafs ) ] && AFS=""`
119		119
120	`# turn of sound (volume=0)`	120	`# turn of sound (volume=0)`
121	`NOSOUND=$( cmdline_parameter nosound )`	121	`NOSOUND=$( cmdline_parameter nosound )`
122		122
123	`# local user name?`	123	`# local user name?`
124	`LOCALUSER=$( cmdline_value user )`	124	`LOCALUSER=$( cmdline_value user )`
125		125
126	`# hostname?`	126	`# hostname?`
127	`HOSTNAME=$( cmdline_value hostname )`	127	`HOSTNAME=$( cmdline_value hostname )`
128		128
129	`# do we have defined a configuration directory?`	129	`# do we have defined a configuration directory?`
130	`CONFIG=$( cmdline_value config )`	130	`CONFIG=$( cmdline_value config )`
131		131
132	`# do not update fstab?`	132	`# do not update fstab?`
133	`NOFSTAB=$( cmdline_parameter nofstab )`	133	`NOFSTAB=$( cmdline_parameter nofstab )`
134		134
135	`# kde/gnome as desktop`	135	`# kde/gnome as desktop`
136	`GNOME=$( cmdline_parameter gnome )`	136	`GNOME=$( cmdline_parameter gnome )`
137	`KDE=$( cmdline_parameter kde )`	137	`KDE=$( cmdline_parameter kde )`
138		138
139	`# do no fixes (useful for debugging)`	139	`# do no fixes (useful for debugging)`
140	`NOFIX=$( cmdline_parameter nofix )`	140	`NOFIX=$( cmdline_parameter nofix )`
141		141
142	`# do not start network`	142	`# do not start network`
143	`NONET=$( cmdline_parameter nonet )`	143	`NONET=$( cmdline_parameter nonet )`
144		144
145		145
146		146
147	`### -----------------------------------------------------------`	147	`### -----------------------------------------------------------`
148	`### Functions`	148	`### Functions`
149	`### -----------------------------------------------------------`	149	`### -----------------------------------------------------------`
150		150
151	`reload_soundmodule() {`	151	`reload_soundmodule() {`
152		152
153	`### unload/load sound module for snd-card-X (timing problem?)`	153	`### unload/load sound module for snd-card-X (timing problem?)`
154	`if [ ! $NOFIX ]; then`	154	`if [ ! $NOFIX ]; then`
155	`rpm -q alsa-lib \| grep el5 >/dev/null`	155	`rpm -q alsa-lib \| grep el5 >/dev/null`
156	`if [ "$?" = "0" ]; then`	156	`if [ "$?" = "0" ]; then`
157	`# disable kernel messages`	157	`# disable kernel messages`
158	`echo "0" > /proc/sys/kernel/printk`	158	`echo "0" > /proc/sys/kernel/printk`
159	`sound_modules=$( grep snd-card- /etc/modprobe.conf \| awk ' $1 ~ /alias/ { print $3 }' \| tr - _ )`	159	`sound_modules=$( grep snd-card- /etc/modprobe.conf \| awk ' $1 ~ /alias/ { print $3 }' \| tr - _ )`
160	`for module in $sound_modules; do`	160	`for module in $sound_modules; do`
161	`lsmod \| awk '{ print $1 }' \| grep $module >/dev/null 2>&1`	161	`lsmod \| awk '{ print $1 }' \| grep $module >/dev/null 2>&1`
162	`if [ "$?" = "0" ]; then`	162	`if [ "$?" = "0" ]; then`
163	`rmmod $module >/dev/null 2>&1`	163	`rmmod $module >/dev/null 2>&1`
164	`modprobe $module >/dev/null 2>&1`	164	`modprobe $module >/dev/null 2>&1`
165	`fi`	165	`fi`
166	`done`	166	`done`
167	`# enable kernel messages`	167	`# enable kernel messages`
168	`echo "6" > /proc/sys/kernel/printk`	168	`echo "6" > /proc/sys/kernel/printk`
169	`fi`	169	`fi`
170	`fi`	170	`fi`
171	`}`	171	`}`
172		172
173		173
174	`### -----------------------------------------------------------`	174	`### -----------------------------------------------------------`
175	`### Improved hardware detection`	175	`### Improved hardware detection`
176	`### -----------------------------------------------------------`	176	`### -----------------------------------------------------------`
177		177
178	`### Improved graphic card detection`	178	`### Improved graphic card detection`
179		179
180	`if [ ! $SIMPLEX ] && [ ! $NOFIX ]; then`	180	`if [ ! $SIMPLEX ] && [ ! $NOFIX ]; then`
181		181
182	`### Intel Mobile 915GM`	182	`### Intel Mobile 915GM`
183	`lspci \| grep -q VGA.Intel.Mobile.*915GM`	183	`lspci \| grep -q VGA.Intel.Mobile.*915GM`
184	`if [ "$?" = "0" ]; then`	184	`if [ "$?" = "0" ]; then`
185	`I915GM=i915gm`	185	`I915GM=i915gm`
186	`[ $XDRIVER ] \|\| XDRIVER=i810`	186	`[ $XDRIVER ] \|\| XDRIVER=i810`
187	`fi`	187	`fi`
188		188
189	`### Intel Mobile 855GM`	189	`### Intel Mobile 855GM`
190	`lspci \| grep -q VGA.Intel.855GM`	190	`lspci \| grep -q VGA.Intel.855GM`
191	`if [ "$?" = "0" ]; then`	191	`if [ "$?" = "0" ]; then`
192	`I855GM=i855gm`	192	`I855GM=i855gm`
193	`fi`	193	`fi`
194	`fi`	194	`fi`
195		195
196		196
197	`### -----------------------------------------------------------`	197	`### -----------------------------------------------------------`
198	`### Main`	198	`### Main`
199	`### -----------------------------------------------------------`	199	`### -----------------------------------------------------------`
200		200
201	`### try to load fuse kernel module`	201	`### try to load fuse kernel module`
202	`modprobe fuse 2>/dev/null`	202	`modprobe fuse 2>/dev/null`
203		203
204	`### reload sound module (first time)`	204	`### reload sound module (first time)`
205	`reload_soundmodule`	205	`reload_soundmodule`
206		206
207	`### activate SWAP`	207	`### activate SWAP`
208	`# delete all swap lines in fstab`	208	`# delete all swap lines in fstab`
209	`sed -i -e "/ swap /d" /etc/fstab`	209	`sed -i -e "/ swap /d" /etc/fstab`
210	`# search for swap partition`	210	`# search for swap partition`
211	`fdisk -l > /var/log/fdisk`	211	`fdisk -l > /var/log/fdisk`
212	`swap_part=$( fdisk -l 2>/dev/null \| grep -i "Linux swap" \`	212	`swap_part=$( fdisk -l 2>/dev/null \| grep -i "Linux swap" \`
213	`\| grep "^/dev/" \| cut -f 1 -d " " \| head -1 )`	213	`\| grep "^/dev/" \| cut -f 1 -d " " \| head -1 )`
214	`# add to /etc/fstab and activate SWAP`	214	`# add to /etc/fstab and activate SWAP`
215	`if [ $swap_part ] && [ ! $NOSWAP ]; then`	215	`if [ $swap_part ] && [ ! $NOSWAP ]; then`
216	`echo "$swap_part swap swap defaults 0 0" >>/etc/fstab`	216	`echo "$swap_part swap swap defaults 0 0" >>/etc/fstab`
217	`# activate SWAP`	217	`# activate SWAP`
218	`swapoff -a`	218	`swapoff -a`
219	`swapon -a -e`	219	`swapon -a -e`
220	`fi`	220	`fi`
221		221
222	`### MAC Address of eth0`	222	`### MAC Address of eth0`
223	`MAC_ETH0=$( ifconfig \| grep eth0 \| awk '{print $5}' )`	223	`MAC_ETH0=$( ifconfig \| grep eth0 \| awk '{print $5}' )`
224		224
225	`### Get CONFIG_FOLDER for this machine from NFS Server (if existing)`	225	`### Get CONFIG_FOLDER for this machine from NFS Server (if existing)`
226	`# and copy it to /$MOUNTDIR`	226	`# and copy it to /$MOUNTDIR`
227	`if [ $NFSSERVER ] && [ $CONFIG ]; then`	227	`if [ $NFSSERVER ] && [ $CONFIG ]; then`
228	`mkdir -p /mnt/config`	228	`mkdir -p /mnt/config`
229	`echo "Search for configuration files on the server ..."`	229	`echo "Search for configuration files on the server ..."`
230	`/etc/init.d/portmap start >/dev/null`	230	`/etc/init.d/portmap start >/dev/null`
231	`mount -t nfs $NFSSERVER:$CONFIG /mnt/config 2>/dev/null`	231	`mount -t nfs $NFSSERVER:$CONFIG /mnt/config 2>/dev/null`
232	`if [ "$?" != "0" ]; then`	232	`if [ "$?" != "0" ]; then`
233	`echo "Could not mount $NFSSERVER:$CONFIG."`	233	`echo "Could not mount $NFSSERVER:$CONFIG."`
234	`else`	234	`else`
235	`if [ -d /mnt/config/$MAC_ETH0 ]; then`	235	`if [ -d /mnt/config/$MAC_ETH0 ]; then`
236	`CONFIG_FOLDER=/$MOUNTDIR/config`	236	`CONFIG_FOLDER=/$MOUNTDIR/config`
237	`mkdir -p $CONFIG_FOLDER`	237	`mkdir -p $CONFIG_FOLDER`
238	`cp -a /mnt/config/$MAC_ETH0/* /$CONFIG_FOLDER/ 2>/dev/null`	238	`cp -a /mnt/config/$MAC_ETH0/* /$CONFIG_FOLDER/ 2>/dev/null`
239	`if [ "$?" != "0" ]; then`	239	`if [ "$?" != "0" ]; then`
240	`echo "Could not get $NFSSERVER:$CONFIG/$MAC_ETH0"`	240	`echo "Could not get $NFSSERVER:$CONFIG/$MAC_ETH0"`
241	`CONFIG_FOLDER=""`	241	`CONFIG_FOLDER=""`
242	`else`	242	`else`
243	`echo "Found configuration files on the server."`	243	`echo "Found configuration files on the server."`
244	`fi`	244	`fi`
245	`fi`	245	`fi`
246	`umount /mnt/config`	246	`umount /mnt/config`
247	`fi`	247	`fi`
248	`/etc/init.d/portmap stop >/dev/null`	248	`/etc/init.d/portmap stop >/dev/null`
249	`fi`	249	`fi`
250		250
251	`### search for partitions and update fstab`	251	`### search for partitions and update fstab`
252	`### and look for $SAVEFOLDER (previously stored data)`	252	`### and look for $SAVEFOLDER (previously stored data)`
253	`if [ ! $FASTBOOT ] && [ ! $NOFSTAB ]; then`	253	`if [ ! $FASTBOOT ] && [ ! $NOFSTAB ]; then`
254	`echo "Update /etc/fstab ..."`	254	`echo "Update /etc/fstab ..."`
255	`# disable kernel messages during mount/unmount`	255	`# disable kernel messages during mount/unmount`
256	`echo 0 > /proc/sys/kernel/printk`	256	`echo 0 > /proc/sys/kernel/printk`
257	`DEVICES=$( list_partition_devices )`	257	`DEVICES=$( list_partition_devices )`
258	`for DEVICE in $DEVICES; do`	258	`for DEVICE in $DEVICES; do`
259	`# try to mount the device and unmount it.`	259	`# try to mount the device and unmount it.`
260	`# If OK, we can add it to fstab`	260	`# If OK, we can add it to fstab`
261	`DEV=$( basename $DEVICE )`	261	`DEV=$( basename $DEVICE )`
262	`mkdir -p /mnt/$DEV`	262	`mkdir -p /mnt/$DEV`
263	`mount $DEVICE /mnt/$DEV >/dev/null 2>&1`	263	`mount $DEVICE /mnt/$DEV >/dev/null 2>&1`
264	`# search for $SAVEFOLDER`	264	`# search for $SAVEFOLDER`
265	`if [ -d /mnt/$DEV/$SAVEFOLDER ]; then`	265	`if [ -d /mnt/$DEV/$SAVEFOLDER ]; then`
266	`FOUND_RESTORE_DEV=/dev/$DEV`	266	`FOUND_RESTORE_DEV=/dev/$DEV`
267	`echo "Found folder '$SAVEFOLDER' on $FOUND_RESTORE_DEV"`	267	`echo "Found folder '$SAVEFOLDER' on $FOUND_RESTORE_DEV"`
268	`fi`	268	`fi`
269	`# unmount again`	269	`# unmount again`
270	`umount /mnt/$DEV >/dev/null 2>&1`	270	`umount /mnt/$DEV >/dev/null 2>&1`
271	`# if sucsessful add to fstab, if not already in fstab`	271	`# if sucsessful add to fstab, if not already in fstab`
272	`if [ "$?" = "0" ]; then`	272	`if [ "$?" = "0" ]; then`
273	`grep -q "^$DEVICE " /etc/fstab`	273	`grep -q "^$DEVICE " /etc/fstab`
274	`if [ "$?" != "0" ]; then`	274	`if [ "$?" != "0" ]; then`
275	`echo -e "$DEVICE \t /mnt/$DEV \t auto \t $MOUNTOPT,suid,dev,exec 0 0" >> /etc/fstab`	275	`echo -e "$DEVICE \t /mnt/$DEV \t auto \t $MOUNTOPT,suid,dev,exec 0 0" >> /etc/fstab`
276	`fi`	276	`fi`
277	`else`	277	`else`
278	`rmdir /mnt/$DEV 2>/dev/null`	278	`rmdir /mnt/$DEV 2>/dev/null`
279	`fi`	279	`fi`
280	`done`	280	`done`
281	`# enable kernel messages again`	281	`# enable kernel messages again`
282	`echo 6 > /proc/sys/kernel/printk`	282	`echo 6 > /proc/sys/kernel/printk`
283	`fi`	283	`fi`
284		284
285	`### if $SAVEFOLDER found, set $CONFIG_FOLDER and mount $FOUND_RESTORE_MNT`	285	`### if $SAVEFOLDER found, set $CONFIG_FOLDER and mount $FOUND_RESTORE_MNT`
286	`if [ $FOUND_RESTORE_DEV ]; then`	286	`if [ $FOUND_RESTORE_DEV ]; then`
287	`FOUND_RESTORE_MNT=$( grep "^$FOUND_RESTORE_DEV " /etc/fstab \| awk '{ print $2 }' )`	287	`FOUND_RESTORE_MNT=$( grep "^$FOUND_RESTORE_DEV " /etc/fstab \| awk '{ print $2 }' )`
288	`CONFIG_FOLDER=$FOUND_RESTORE_MNT/$SAVEFOLDER`	288	`CONFIG_FOLDER=$FOUND_RESTORE_MNT/$SAVEFOLDER`
289	`echo "Will restore data from $CONFIG_FOLDER"`	289	`echo "Will restore data from $CONFIG_FOLDER"`
290	`mount $FOUND_RESTORE_MNT`	290	`mount $FOUND_RESTORE_MNT`
291	`fi`	291	`fi`
292		292
293	`### source the file "config", if found in $CONFIG_FOLDER`	293	`### source the file "config", if found in $CONFIG_FOLDER`
294	`if [ -f $CONFIG_FOLDER/config ]; then`	294	`if [ -f $CONFIG_FOLDER/config ]; then`
295	`. $CONFIG_FOLDER/config`	295	`. $CONFIG_FOLDER/config`
296	`fi`	296	`fi`
297		297
298	`### do we have a shadow/passwd file in $FOUND_FOULDER`	298	`### do we have a shadow/passwd file in $FOUND_FOULDER`
299	`if [ -r $CONFIG_FOLDER/passwd.tar.gz ] && [ -r $CONFIG_FOLDER/shadow.tar.gz ]; then`	299	`if [ -r $CONFIG_FOLDER/passwd.tar.gz ] && [ -r $CONFIG_FOLDER/shadow.tar.gz ]; then`
300	`# we do not need a password for local user and root`	300	`# we do not need a password for local user and root`
301	`NOLOCAL=nolocal`	301	`NOLOCAL=nolocal`
302	`NOROOT=noroot`	302	`NOROOT=noroot`
303	`fi`	303	`fi`
304		304
305	`### set local user name and default hostname`	305	`### set local user name and default hostname`
306	`if [ $PSI ]; then`	306	`if [ $PSI ]; then`
307	`[ $LOCALUSER ] \|\| LOCALUSER=l_psi`	307	`[ $LOCALUSER ] \|\| LOCALUSER=l_psi`
308	`DEFAULT_HOSTNAME=psi`	308	`DEFAULT_HOSTNAME=psi`
309	`else`	309	`else`
310	`[ $LOCALUSER ] \|\| LOCALUSER=sluser`	310	`[ $LOCALUSER ] \|\| LOCALUSER=sluser`
311	`DEFAULT_HOSTNAME=slinux`	311	`DEFAULT_HOSTNAME=slinux`
312	`fi`	312	`fi`
313		313
314	`### check for xorg.conf in CONFIG_FOLDER`	314	`### check for xorg.conf in CONFIG_FOLDER`
315	`if [ -r $CONFIG_FOLDER/xorg.conf ]; then`	315	`if [ -r $CONFIG_FOLDER/xorg.conf ]; then`
316	`cp -af $CONFIG_FOLDER/xorg.conf $XORG_CONF`	316	`cp -af $CONFIG_FOLDER/xorg.conf $XORG_CONF`
317	`if [ "$?" = "0" ]; then`	317	`if [ "$?" = "0" ]; then`
318	`echo "Saved xorg.conf file found."`	318	`echo "Saved xorg.conf file found."`
319	`XDRIVER=""`	319	`XDRIVER=""`
320	`HAVE_XORG_CONF="yes"`	320	`HAVE_XORG_CONF="yes"`
321	`fi`	321	`fi`
322	`fi`	322	`fi`
323		323
324	`### use vesa driver?`	324	`### use vesa driver?`
325	`if [ $VESA ]; then`	325	`if [ $VESA ]; then`
326	`echo "Force to use VESA driver!"`	326	`echo "Force to use VESA driver!"`
327	`video_driver="--set-driver=vesa"`	327	`video_driver="--set-driver=vesa"`
328	`else`	328	`else`
329	`video_driver=""`	329	`video_driver=""`
330	`fi`	330	`fi`
331		331
332	`### force an other video driver?`	332	`### force an other video driver?`
333	`if [ $XDRIVER ]; then`	333	`if [ $XDRIVER ]; then`
334	`echo "Force to use $XDRIVER driver!"`	334	`echo "Force to use $XDRIVER driver!"`
335	`video_driver="--set-driver=$XDRIVER"`	335	`video_driver="--set-driver=$XDRIVER"`
336	`fi`	336	`fi`
337		337
338	`### configure Xserver`	338	`### configure Xserver`
339	`if [ -x /usr/bin/system-config-display ]; then`	339	`if [ -x /usr/bin/system-config-display ]; then`
340	`echo "Configure Xserver:"`	340	`echo "Configure Xserver:"`
341	`if [ ! $HAVE_XORG_CONF ]; then`	341	`if [ ! $HAVE_XORG_CONF ]; then`
342	`if [ ! $SIMPLEX ]; then`	342	`if [ ! $SIMPLEX ]; then`
343		343
344	`# default values`	344	`# default values`
345	`[ ! $HSYNC ] && HSYNC="$HSYNC_DEFAULT"`	345	`[ ! $HSYNC ] && HSYNC="$HSYNC_DEFAULT"`
346	`[ ! $VSYNC ] && VSYNC="$VSYNC_DEFAULT"`	346	`[ ! $VSYNC ] && VSYNC="$VSYNC_DEFAULT"`
347	`[ ! $SCREEN ] && SCREEN="$SCREEN_DEFAULT"`	347	`[ ! $SCREEN ] && SCREEN="$SCREEN_DEFAULT"`
348		348
349	`# run system-config-display`	349	`# run system-config-display`
350	`system-config-display \`	350	`system-config-display \`
351	`--reconfig \`	351	`--reconfig \`
352	`-v \`	352	`-v \`
353	`--set-resolution=$SCREEN \`	353	`--set-resolution=$SCREEN \`
354	`--set-hsync=$HSYNC \`	354	`--set-hsync=$HSYNC \`
355	`--set-vsync=$VSYNC \`	355	`--set-vsync=$VSYNC \`
356	`$video_driver \| grep Trying`	356	`$video_driver \| grep Trying`
357		357
358	`# system-config-display in SL5 does not work nicely :-(`	358	`# system-config-display in SL5 does not work nicely :-(`
359	`# e.g. No Monitor Section`	359	`# e.g. No Monitor Section`
360		360
361	`# add Monitor Section and add Monitor0 to Screen Section`	361	`# add Monitor Section and add Monitor0 to Screen Section`
362	`grep -q Monitor $XORG_CONF`	362	`grep -q Monitor $XORG_CONF`
363	`if [ "$?" != "0" ]; then`	363	`if [ "$?" != "0" ]; then`
364	`echo "Section \"Monitor\"" >> $XORG_CONF`	364	`echo "Section \"Monitor\"" >> $XORG_CONF`
365	`echo -e "\tIdentifier \"Monitor0\"" >> $XORG_CONF`	365	`echo -e "\tIdentifier \"Monitor0\"" >> $XORG_CONF`
366	`echo -e "\tHorizSync $HSYNC" >> $XORG_CONF`	366	`echo -e "\tHorizSync $HSYNC" >> $XORG_CONF`
367	`echo -e "\tVertRefresh $VSYNC" >> $XORG_CONF`	367	`echo -e "\tVertRefresh $VSYNC" >> $XORG_CONF`
368	`echo -e "\tOption \"dpms\"" >> $XORG_CONF`	368	`echo -e "\tOption \"dpms\"" >> $XORG_CONF`
369	`echo -e "EndSection" >> $XORG_CONF`	369	`echo -e "EndSection" >> $XORG_CONF`
370	`sed -i "s\|Device \"Videocard0\"\|Device \"Videocard0\"\n\tMonitor \"Monitor0\"\|" $XORG_CONF`	370	`sed -i "s\|Device \"Videocard0\"\|Device \"Videocard0\"\n\tMonitor \"Monitor0\"\|" $XORG_CONF`
371	`fi`	371	`fi`
372		372
373	`# add Modes for $SCREEN, if not yet there`	373	`# add Modes for $SCREEN, if not yet there`
374	`grep -q Modes $XORG_CONF`	374	`grep -q Modes $XORG_CONF`
375	`if [ "$?" != "0" ]; then`	375	`if [ "$?" != "0" ]; then`
376	`modeline=$( echo ${MODES_DEFAULT} \| sed "s\|.*\"$SCREEN\|\"$SCREEN\|" )`	376	`modeline=$( echo ${MODES_DEFAULT} \| sed "s\|.*\"$SCREEN\|\"$SCREEN\|" )`
377	`if [ "$modeline" ]; then`	377	`if [ "$modeline" ]; then`
378	`sed -i "s\|\tDepth.*\|\tDepth 24\n\t\tModes $modeline\|" $XORG_CONF`	378	`sed -i "s\|\tDepth.*\|\tDepth 24\n\t\tModes $modeline\|" $XORG_CONF`
379	`fi`	379	`fi`
380	`fi`	380	`fi`
381		381
382		382
383	`# simple Xserver configuration.`	383	`# simple Xserver configuration.`
384	`else`	384	`else`
385	`echo "Use simple Xserver configuration."`	385	`echo "Use simple Xserver configuration."`
386	`system-config-display --noui --reconfig -v \| grep Trying`	386	`system-config-display --noui --reconfig -v \| grep Trying`
387	`fi`	387	`fi`
388	`fi`	388	`fi`
389	`fi`	389	`fi`
390		390
391	`### enable nvidia driver`	391	`### enable nvidia driver`
392	`if [ $NVIDIA ] && [ ! $NONVIDIA ]; then`	392	`if [ $NVIDIA ] && [ ! $NONVIDIA ]; then`
393	`# serach for Nvidia Video Card`	393	`# serach for Nvidia Video Card`
394	`/sbin/lspci \| grep VGA \| grep -i -q nvidia`	394	`/sbin/lspci \| grep VGA \| grep -i -q nvidia`
395	`if [ "$?" = "0" ]; then`	395	`if [ "$?" = "0" ]; then`
396	`# nvidia-x11-drv installed?`	396	`# nvidia-x11-drv installed?`
397	`which nvidia-xconfig >/dev/null 2>&1`	397	`which nvidia-xconfig >/dev/null 2>&1`
398	`if [ "$?" = "0" ]; then`	398	`if [ "$?" = "0" ]; then`
399	`echo "Enable nvidia driver."`	399	`echo "Enable nvidia driver."`
400	`# set driver to nv in case it's only vesa`	400	`# set driver to nv in case it's only vesa`
401	`sed -i 's\|"vesa"\|"nv"\|' /etc/X11/xorg.conf`	401	`sed -i 's\|"vesa"\|"nv"\|' /etc/X11/xorg.conf`
402	`# configure for nvidia driver`	402	`# configure for nvidia driver`
403	`nvidia-xconfig >/dev/null 2>&1`	403	`nvidia-xconfig >/dev/null 2>&1`
404	`nvidia-config-display enable`	404	`nvidia-config-display enable`
405	`else`	405	`else`
406	`echo "Nvidia driver not found."`	406	`echo "Nvidia driver not found."`
407	`fi`	407	`fi`
408	`fi`	408	`fi`
409	`fi`	409	`fi`
410		410
411	`### set special video driver options for Intel Mobile`	411	`### set special video driver options for Intel Mobile`
412		412
413	`# (external VGA output: Clone)`	413	`# (external VGA output: Clone)`
414	`if [ $I915GM ] \|\| [ $I855GM ]; then`	414	`if [ $I915GM ] \|\| [ $I855GM ]; then`
415	`sed -e "/Section[ \t]*\"Device\"/,/EndSection/{`	415	`sed -e "/Section[ \t]*\"Device\"/,/EndSection/{`
416	`/^[ \t]Option[ \t]\"MonitorLayout\"/d`	416	`/^[ \t]Option[ \t]\"MonitorLayout\"/d`
417	`/^[ \t]Option[ \t]\"Clone/d`	417	`/^[ \t]Option[ \t]\"Clone/d`
418	`/EndSection/i\\`	418	`/EndSection/i\\`
419	`Option \"MonitorLayout\" \"CRT,LFP\"\\`	419	`Option \"MonitorLayout\" \"CRT,LFP\"\\`
420	`Option \"Clone\" \"1\"\\`	420	`Option \"Clone\" \"1\"\\`
421	`Option \"CloneRefresh\" \"60\"`	421	`Option \"CloneRefresh\" \"60\"`
422	`}" -i $XORG_CONF`	422	`}" -i $XORG_CONF`
423	`fi`	423	`fi`
424		424
425	`# Set BoardName for Intel 915GM`	425	`# Set BoardName for Intel 915GM`
426	`if [ $I915GM ]; then`	426	`if [ $I915GM ]; then`
427	`sed -i 's/BoardName.VESA driver./BoardName "Intel 915"/' $XORG_CONF`	427	`sed -i 's/BoardName.VESA driver./BoardName "Intel 915"/' $XORG_CONF`
428	`fi`	428	`fi`
429		429
430		430
431	`### parameter KB = KEYBOARD`	431	`### parameter KB = KEYBOARD`
432	`KEYBOARD=$KB`	432	`KEYBOARD=$KB`
433		433
434	`### ask user for keyboard layout if no keyboard given`	434	`### ask user for keyboard layout if no keyboard given`
435	`if [ -x /usr/bin/system-config-keyboard ]; then`	435	`if [ -x /usr/bin/system-config-keyboard ]; then`
436	`if [ ! $KEYBOARD ]; then`	436	`if [ ! $KEYBOARD ]; then`
437	`MORE_LAYOUTS="more..."`	437	`MORE_LAYOUTS="more..."`
438	`keytables="U.S...........(us) \`	438	`keytables="U.S...........(us) \`
439	`Swiss-German..(sg-latin1) \`	439	`Swiss-German..(sg-latin1) \`
440	`Swiss-French..(fr_CH-latin1) \`	440	`Swiss-French..(fr_CH-latin1) \`
441	`German........(de-latin1) \`	441	`German........(de-latin1) \`
442	`Japanese......(jp106) \`	442	`Japanese......(jp106) \`
443	`$MORE_LAYOUTS"`	443	`$MORE_LAYOUTS"`
444	`PS3="-> "`	444	`PS3="-> "`
445	`echo`	445	`echo`
446	`echo "Please choose keyboard layout (type 1-6):"`	446	`echo "Please choose keyboard layout (type 1-6):"`
447	`select KEYBOARD in $keytables;`	447	`select KEYBOARD in $keytables;`
448	`do`	448	`do`
449	`case $KEYBOARD in`	449	`case $KEYBOARD in`
450	`*)`	450	`*)`
451	`# extract keyboard layout string from $KEYBOARD`	451	`# extract keyboard layout string from $KEYBOARD`
452	`KEYBOARD=${KEYBOARD##*(}`	452	`KEYBOARD=${KEYBOARD##*(}`
453	`KEYBOARD=${KEYBOARD%%)}`	453	`KEYBOARD=${KEYBOARD%%)}`
454	`break`	454	`break`
455	`;;`	455	`;;`
456	`esac`	456	`esac`
457	`done`	457	`done`
458	`fi`	458	`fi`
459	`fi`	459	`fi`
460		460
461	`### set keyboard`	461	`### set keyboard`
462	`if [ -x /usr/bin/system-config-keyboard ]; then`	462	`if [ -x /usr/bin/system-config-keyboard ]; then`
463	`if [ "$KEYBOARD" = "$MORE_LAYOUTS" ]; then`	463	`if [ "$KEYBOARD" = "$MORE_LAYOUTS" ]; then`
464	`system-config-keyboard --text`	464	`system-config-keyboard --text`
465	`else`	465	`else`
466	`echo -n "Set keyboard to '$KEYBOARD', please wait ... "`	466	`echo -n "Set keyboard to '$KEYBOARD', please wait ... "`
467	`system-config-keyboard --noui $KEYBOARD >/dev/null 2>&1`	467	`system-config-keyboard --noui $KEYBOARD >/dev/null 2>&1`
468	`echo "done."`	468	`echo "done."`
469	`fi`	469	`fi`
470	`echo`	470	`echo`
471	`fi`	471	`fi`
472		472
473	`### update AFS users and SEPP (only for PSI)`	473	`### update AFS users and SEPP (only for PSI)`
474	`if [ $PSI ] && [ $AFS ]; then`	474	`if [ $PSI ] && [ $AFS ]; then`
475	`echo "Update AFS users..."`	475	`echo "Update AFS users..."`
476	`[ -x /afs/psi.ch/sys/common/update_user.pl ] && /afs/psi.ch/sys/common/update_user.pl >/dev/null 2>&1 &`	476	`[ -x /afs/psi.ch/sys/common/update_user.pl ] && /afs/psi.ch/sys/common/update_user.pl >/dev/null 2>&1 &`
477	`if [ -d /usr/pack ]; then`	477	`if [ -d /usr/pack ]; then`
478	`echo "Update SEPP links..."`	478	`echo "Update SEPP links..."`
479	`[ -x /afs/psi.ch/sys/common/update_sepp.pl ] && /afs/psi.ch/sys/common/update_sepp.pl >/dev/null 2>&1 &`	479	`[ -x /afs/psi.ch/sys/common/update_sepp.pl ] && /afs/psi.ch/sys/common/update_sepp.pl >/dev/null 2>&1 &`
480	`fi`	480	`fi`
481	`echo`	481	`echo`
482	`fi`	482	`fi`
483		483
484	`### create local user, if "nolocal" is not set`	484	`### create local user, if "nolocal" is not set`
485	`if [ ! $NOLOCAL ]; then`	485	`if [ ! $NOLOCAL ]; then`
486		486
487	`user=$LOCALUSER`	487	`user=$LOCALUSER`
488	`# execute useradd/groupadd twice, to make it work (don't know why)`	-
489	`if [ $PSI ] && [ ! $NOADMIN ]; then`	488	`if [ $PSI ] && [ ! $NOADMIN ]; then`
490	`groupdel $user 2>/dev/null`	-
491	`groupadd $user 2>/dev/null`	489	`groupadd $user 2>/dev/null`
492	`groupdel $user 2>/dev/null`	-
493	`groupadd $user`	-
494		-
495	`userdel -r $user 2>/dev/null`	-
496	`useradd -G $LocalAdminGroup $user 2>/dev/null`	-
497	`userdel -r $user 2>/dev/null`	-
498	`# add user to fuse group ?`	490	`# add user to fuse group ?`
499	`grep -q "^fuse:" /etc/group`	491	`grep -q "^fuse:" /etc/group`
500	`if [ "$?" = "0" ]; then`	492	`if [ "$?" = "0" ]; then`

Subversion Repositories livecd

(root)/trunk/customize/runlast @ 191 – Rev 169 → 172