Subversion Repositories livecd

#!/bin/bash

#

###############################################################

#

# Installes the LiveCD on local hard disk

# 

# Boot LiveCD and run this script as root

#

# Urs Beyerle

# Brent L. Bates

#

###############################################################

###############################################################

# Definitions

###############################################################

# set PATH

PATH="/usr/bin:/usr/sbin:/bin:/sbin:/usr/X11R6/bin"

# RPMs that are no longer needed and may break future udpates

RPMS_TO_REMOVE="kernel-module-squashfs \

                kernel-module-unionfs \

                kernel-module-aufs \

                unionfs-.* \

                aufs-.* \

                squashfs-.*"

# RPMs that can break future Scientific Linux updates

# because there are not part of Scientific Linux

RPMS_TO_REMOVE_SL=""

# RPMs that can break future PSI SL updates

# because there are not part of PSI Scientific Linux

RPMS_TO_REMOVE_PSI=""

# files which should be restored from .ori files

FILES_RESTORE="/etc/init.d/netfs \

           /etc/init.d/autofs \

           /etc/init.d/halt \

           /etc/init.d/network

           /etc/init.d/functions \

           /etc/rc.d/rc.sysinit \

           /etc/sysconfig/afs \

           /etc/motd \

           /etc/redhat-release \

           /etc/rc.d/rc.local"

# LiveCD init scripts will be removed

LIVECD_INIT_SCRIPTS="runfirst \

                    runveryfirst \

                    runlast \

                    kudzu-auto \

                    login"

# Main directories which should be not be copied

DIR_NOT_COPY="/proc \

              /dev \

              /livecd \

              /boot \

              /afs \

              /sys \

              /media \

              /misc \

              /mnt \

              /net \

              /initrd"

# Mount point of the new SL system

NEW=/mnt/harddisk

# Name of the script

SCRIPTNAME=$( basename $0 )

# dir of mounted /$MOUNTDIR/live

MOUNTDIR=livecd

# Default File System Type

FS_TYPE=ext3

###############################################################

# Functions

###############################################################

function usage() {

   ## Usage

   # ----------------------------------------------------------

   cat <<EOF

  $SCRIPTNAME [OPTIONS] -mbr=[DEVICE] [PARTITION | MOUNTED FILE SYSTEM]

    Installes LiveCD on PARTITION and the bootloader grub into 

    the Master Boot Record (MBR) of DEVICE. The MBR will be 

    backed up to PARTITION.

  OPTIONS:

    -h   --help          : Print this screen

    -swap=[partition(s)] : Use [partition(s)] as swap ("," or "|" separated)

    -win=[partition]     : Your active Windows partition. If not given, 

                           $SCRIPTNAME tries to find it

    -nogrub              : Do not install grub. You have to install 

                           manually a bootloader (not recommended)

    -floppy              : Needed, if grub should be installed on floppy

                           In this case use -mbr=/dev/fd0 -floppy

    -norpmremove         : Do not remove RPMs that can break future 

                           updates (not recommended)

    -fstype              : File system type (ext3,xfs,etc.), default is $FS_TYPE

    -y                   : Answer all questions with yes

    -f                   : force formating 

  Example:

  $SCRIPTNAME -swap=/dev/sda3 -mbr=/dev/sda /dev/sda2

    Will install LiveCD on /dev/sda2 (= second partition on 

    first SATA disk). All data on /dev/sda2 will be deleted.

    /dev/sda3 has to be a Linux Swap partion. GRUB will be 

    installed in the MBR of /dev/sda (= first SATA disk).

  Remarks:

    To display your hard disk partitions, user 'fdisk -l'.

    Use fdisk, qtparted or parted to create an empty Linux

    partition.

EOF

}

function exit_now() {

    local exitcode=$1

    umount $INSTALL_PART 2>/dev/null

    exit $exitcode

}

###############################################################

# Main

###############################################################

### are we root?

### -----------------------------------------------------------

if [ "$( whoami )" != "root" ]; then

    echo; echo "Please run this script as root: 'su - -c $SCRIPTNAME'"; echo

    exit_now 1

fi

### read options from command-line

### -----------------------------------------------------------

while [ $# -gt 0 ]; do

    case "$1" in

       -h)

            usage; exit_now;;

       --help)

            usage; exit_now;;

       -swap*)

           if echo $1 | grep -q '=' ; then

               SWAP_PART=$( echo $1 | sed 's/^-swap=//' )

           else

               shift

               SWAP_PART=$1

           fi

           ;;

       -mbr*)

           if echo $1 | grep -q '=' ; then

               MBR_DEV=$( echo $1 | sed 's/^-mbr=//' )

           else

               shift

               MBR_DEV=$1

           fi

           MBR_DEV=$( echo "$MBR_DEV" | sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )

           ;;

       -win*)

           if echo $1 | grep -q '=' ; then

               WIN_PART=$( echo $1 | sed 's/^-win=//' )

           else

               shift

               WIN_PART=$1

           fi

           ;;

       -nogrub)

            NOGRUB=$1;;

       -norpmremove)

            NORPMREMOVE=$1;;

       -floppy)

            FLOPPY=$1;;

       -fstype)

            $FS_TYPE=$1;;

       -f)

            $FORCE=$1;;

       -y)

            YES=$1;;

       *)

            INSTALL_PART=$1;;

    esac

    shift

done

echo

### display fdisk -l

### -----------------------------------------------------------

echo "Output of 'fdisk -l' ..."

fdisk -l 2>/dev/null

echo

### test if $INSTALL_PART is defined

### -----------------------------------------------------------

if [ ! $INSTALL_PART ]; then

    echo "No partition defined for installation."

    echo "Please see '$SCRIPTNAME -h'."; echo

    exit_now 1

fi

### test if MBR_DEV is given

### -----------------------------------------------------------

if [ ! $NOGRUB ]; then

    if [ ! $MBR_DEV ]; then

        echo "No MBR device defined."

        echo "Please see '$SCRIPTNAME -h'."

        echo

        exit_now 1

    fi

fi

### test if $INSTALL_PART is mounted

### -----------------------------------------------------------

df -T -l | sed -e 's/  */ /g' | grep -q "${INSTALL_PART}"

if [ "$?" = "0" ]; then

   ### This is a mounted partition

   ### -----------------------------------------------------------

   MOUNTED=1

   df -T -l | sed -e 's/  */ /g' | cut -d" " -f7 | grep -q "^${INSTALL_PART}$"

   if [ "$?" = "0" ]; then

      ### Was given the mount point

      ### -----------------------------------------------------------

      NEW=${INSTALL_PART}

      INSTALL_PART=`df -T -l | grep "${INSTALL_PART}$" | cut -d" " -f1`

   else

      ### Was given the mount partition

      ### -----------------------------------------------------------

      NEW=`df -T -l | grep "^${INSTALL_PART}" | sed -e 's/  */ /g' | cut -d" " -f7`

   fi

   FS_TYPE=`df -T -l | sed -e 's/  */ /g' | grep "^${INSTALL_PART}" | cut -d" " -f2`

   ### Get boot defice information

   ###    Check for separate mounted boot partition

   ### -----------------------------------------------------------

   INSTALL_DEV=`df -T -l | sed -e 's/  */ /g' | grep "boot$" | cut -d" " -f1`

   if [ "$?" = "0" ]; then

      ###    Separate boot partition

      ### -----------------------------------------------------------

      INSTALL_BOOT_DIR=""

   else

      ###    Install and boot all one partition

      ### -----------------------------------------------------------

      INSTALL_DEV=${INSTALL_PART}

      INSTALL_BOOT_DIR="/boot"

   fi

   ### Is the boot device a RAID device

   ### -----------------------------------------------------------

   mdadm -D $INSTALL_DEV 2>/dev/null | grep -q -i Version

   if [ "$?" = "0" ]; then

      ### Boot device is RAID

      ### -----------------------------------------------------------

      BOOT_DRIVE=`mdadm -D $INSTALL_DEV | grep -v ':$' | grep "/dev/" | sed -e 's/  */ /g' | cut -d" " -f8 |head -1`

      INSTALL_PART_NR=$( echo "$BOOT_DRIVE" | sed -e 's%.*/[sh]d[a-z]\([0-9]*\)$%\1%' )

      BOOT_DRIVE=$( echo "$BOOT_DRIVE" | sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )

   else

      ### Boot device not RAID

      ### -----------------------------------------------------------

      INSTALL_PART_NR=$( echo "$INSTALL_DEV" | sed -e 's%.*/[sh]d[a-z]\([0-9]*\)$%\1%' )

      INSTALL_DEV=$( echo "$INSTALL_DEV" | sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )

      BOOT_DRIVE=$INSTALL_DEV

   fi

else

   ### Partition is NOT mounted

   ### -----------------------------------------------------------

   MOUNTED=0

   ### test if $INSTALL_PART exists

   ### -----------------------------------------------------------

   fdisk -l 2>/dev/null | cut -d" " -f1 | grep -q "^${INSTALL_PART}$"

   if [ "$?" != "0" ]; then

       echo "Partition $INSTALL_PART not found! See 'fdisk -l'."

       echo "Or you have to reboot first to make the partition table active." 

       echo

       exit_now 1

   fi

   ### test if $INSTALL_PART is a Linux partition

   ### -----------------------------------------------------------

   fdisk -l 2>/dev/null | grep "Linux$" | cut -d" " -f1 | grep -q "^${INSTALL_PART}$"

   if [ "$?" != "0" ]; then

       echo "Partition $INSTALL_PART is not a Linux partition! (see 'fdisk -l')."

       echo "Use fdisk and/or qtparted to create a Linux partition!"

       echo "You have to reboot first to make the partition table active."

       echo

       exit_now 1

   fi

   ### set $INSTALL_DEV (eg. /dev/sda)

   ### -----------------------------------------------------------

   INSTALL_DEV=$( echo "$INSTALL_PART" | sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )

   BOOT_DRIVE=$INSTALL_DEV

   INSTALL_PART_NR=$( echo "$INSTALL_PART" | sed -e 's%.*/[sh]d[a-z]\([0-9]*\)$%\1%' )

   INSTALL_BOOT_DIR="/boot"

fi

### test if $SWAP_PART exists and is a Linux Swap partition

### -----------------------------------------------------------

if [ "$SWAP_PART" ]; then

    SWAP_PART=`echo ${SWAP_PART} |tr '[,|]' ' '`

    for SWAP_PARTITION in $SWAP_PART ; do

       fdisk -l 2>/dev/null | cut -d" " -f1 | grep -q "^${SWAP_PARTITION}$"

       if [ "$?" != "0" ]; then

           echo "Swap partition $SWAP_PARTITION not found! (see 'fdisk -l')."

           echo "Or you have to reboot first to make the partition table active."

           echo

           exit_now 1

       fi

       fdisk -l 2>/dev/null | grep "Linux swap" | cut -d" " -f1 | grep -q "^${SWAP_PARTITION}$"

       if [ "$?" != "0" ]; then

           echo "Partition(s) $SWAP_PARTITION is/are not a Linux swap partition! (see 'fdisk -l')."

           echo "Use fdisk and/or qtparted to create a Linux Swap partition !"

           echo "You have to reboot first to make the partition table active."

           echo

           exit_now 1

       fi

    done

fi

### print warning

### -----------------------------------------------------------

echo                     "------------------------------------------------------------"

echo                     "   LiveCD will be installed on partition $INSTALL_PART"

[ "$SWAP_PART" ] && echo " Partition(s) $SWAP_PART will be used as swap partition(s)."

[ ! $NOGRUB ]    && echo " GRUB will be installed in Master Boot Record of $MBR_DEV"

echo                     "       !! All data on $INSTALL_PART will be lost !!"

echo                     "------------------------------------------------------------"

echo

### continue?

### -----------------------------------------------------------

if [ ! $YES ]; then

    echo -n "Continue (y/N)? "

    read key

    echo

    [ "$key" != "y" ] && exit_now 0

fi

### format $SWAP_PART (don't format swap, if already formated)

### -----------------------------------------------------------

if [ "$SWAP_PART" ]; then

    echo "Make swap on $SWAP_PART ..."

    swapoff -a >/dev/null 2>&1

    swapon -p 1 $SWAP_PART 2>/dev/null

    if [ "$?" != "0" ]; then

        for SWAP_PARTITION in $SWAP_PART; do

           echo "Format $SWAP_PARTITION as swap." 

           mkswap $SWAP_PARTITION

        done

    fi

    echo

fi

if [ $MOUNTED = "0" ]; then

    ### format $INSTALL_PART

    ### -----------------------------------------------------------

    # define force option for mkfs command

    if [ "$FORCE" ] && [ "$FS_TYPE" = "ext3" ];     then  FORCE="-F"; fi

    if [ "$FORCE" ] && [ "$FS_TYPE" = "ext2" ];     then  FORCE="-F"; fi

    if [ "$FORCE" ] && [ "$FS_TYPE" = "xfs" ];      then  FORCE="-f"; fi

    if [ "$FORCE" ] && [ "$FS_TYPE" = "reiserfs" ]; then  FORCE=""; fi

    echo -n "Format $INSTALL_PART, please wait ... " 

    mkfs.$FS_TYPE $FORCE -q $INSTALL_PART || exit_now 1

    echo "done."; echo

    ### mount $INSTALL_PART

    ### -----------------------------------------------------------

    echo -n "Try to mount $INSTALL_PART to $NEW ... "

    mkdir -p $NEW

    mount $INSTALL_PART $NEW || exit_now 1

    echo "done."; echo

fi

### copy root dirs

### -----------------------------------------------------------

echo "Copy Live System to $INSTALL_PART ..."

root_dirs=$( ls / )

for dir in $root_dirs; do

    # check if dir is not in $DIR_NOT_COPY

    do_not_copy=""

    for not_dir in $DIR_NOT_COPY; do

        if [ "$not_dir" = "/$dir" ]; then 

            do_not_copy="yes"

            break

        fi

    done

    # do not copy links

    [ -L /$dir ] && do_not_copy="yes"

    fail=""

    if [ ! $do_not_copy ]; then

        echo -n "  * Copy  /$dir ... "

        cp -a -f /$dir $NEW || fail=true

        echo "done."

    fi

    fail=""

done

echo

if [ $fail ]; then

    echo "ERROR: Not everything was copied to $INSTALL_PART"

    exit_now 1

fi

### move /usr/opt back to /opt

### -----------------------------------------------------------

if [ -d $NEW/usr/opt ]; then

    echo -n "Move /opt back ... "

    mv $NEW/usr/opt $NEW/

    echo "done."; echo

fi

### create dirs which were not copied

### -----------------------------------------------------------

for dir in $DIR_NOT_COPY; do

   if [ ! -d $NEW$dir ]; then

       mkdir $NEW$dir

   fi

done

# we do not need this directory

rmdir $NEW/livecd

# if not yet existing, create

mkdir -p $NEW/srv

mkdir -p $NEW/selinux

### copy back original files

### -----------------------------------------------------------

echo -n "Restore original files ... " 

for file in $FILES_RESTORE; do

    [ -r $NEW${file}.ori ] && mv -f $NEW${file}.ori $NEW${file} 

done

echo "done."; echo

### define kernel version

### -----------------------------------------------------------

rpm --quiet -q kernel     && UP_installed=true

rpm --quiet -q kernel-smp && SMP_installed=true

[ $UP_installed ]  && KERNEL_VERSION=$( rpm -q --qf "%{V}-%{R}" kernel 2>/dev/null )

[ $SMP_installed ] && KERNEL_VERSION=$( rpm -q --qf "%{V}-%{R}" kernel-smp  2>/dev/null )

if [ ! $KERNEL_VERSION ]; then

    echo "ERROR: Kernel version could not be determined - installation failed"; echo

    exit_now 1

fi    

if [ ! $NOGRUB ]; then

    ### Backup Master Boot Record MBR

    ### -----------------------------------------------------------

    # do we have already a backup?

    MBR_FILENAME="MBR$( echo $MBR_DEV | tr / _ ).bak"

    if [ ! -e /tmp/$MBR_FILENAME ]; then

        echo "Backup Master Boot Record (MBR) of $MBR_DEV ..."

        dd if=$MBR_DEV of=/tmp/$MBR_FILENAME bs=512 count=1

    fi

    cp -a /tmp/$MBR_FILENAME $NEW/$MBR_FILENAME

    echo "MBR saved as $MBR_FILENAME on $INSTALL_PART and on /tmp"

    echo

    ### install grub

    ### -----------------------------------------------------------

    echo "Run grub-install ... "

    mkdir -p $NEW/boot/grub

    if [ $FLOPPY ]; then

        grub-install --root-directory=$NEW $MBR_DEV 2>/dev/null || GRUB_FAILED="yes"

    else

        grub-install --no-floppy --root-directory=$NEW $MBR_DEV 2>/dev/null || GRUB_FAILED="yes"

    fi

    echo "done."; echo

    ### check for device.map file 

    ### -----------------------------------------------------------

    DEVICE_MAP=$NEW/boot/grub/device.map

    if [ ! -e $NEW/boot/grub/device.map ]; then

        echo "ERROR: $NEW/boot/grub/device.map not found"

        exit_now 1

    fi

    ### convert dev syntax to grub syntax

    ### -----------------------------------------------------------

    GRUB_INSTALL_DEV=$( grep $BOOT_DRIVE $DEVICE_MAP | awk '{ print $1 }' )

    GRUB_ROOT_PART=$( echo "$GRUB_INSTALL_DEV" | sed "s%)$%,`expr $INSTALL_PART_NR - 1`)%" )

    ### find active Windows partition

    ### -----------------------------------------------------------

    if [ ! $WIN_PART ]; then

        # try to find active Windows partition

        WIN_PART=$( fdisk -l 2>/dev/null | awk '{ if ($2 == "*" && $7 ~ "NTFS") print $1 }' | head -1 )

    fi

    if [ $WIN_PART ]; then

        WIN_installed=true

        WIN_DISK=$( echo "$WIN_PART" | sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )

        WIN_PART_NR=$( echo "$WIN_PART" | sed -e 's%.*/[sh]d[a-z]\([0-9]*\)$%\1%' )

        # convert dev syntax to grub syntax

        GRUB_WIN_DEV=$( grep $WIN_DISK $DEVICE_MAP | awk '{ print $1 }' )

        GRUB_WIN_PART=$( echo "$GRUB_WIN_DEV" | sed "s%)$%,`expr $WIN_PART_NR - 1`)%" )

        # $GRUB_WIN_PART should be something like (hd0,0)

        echo "Found active Windows partition ( $WIN_PART = $GRUB_WIN_PART )" 

        echo "Will add entry for Windows in GRUB."

        echo

    fi

    ### create grub.conf file

    ### -----------------------------------------------------------

    echo "Create grub.conf ..."

    TITLE="Linux"

    [ -e $NEW/etc/redhat-release ] && TITLE=$( cat $NEW/etc/redhat-release )

    DEFAULT=0

    # set default=1, if smp kernel is running

    uname -r | grep -q smp

    [ "$?" = "0" ] && DEFAULT=1

    cat > $NEW/boot/grub/grub.conf <<EOF

# grub.conf generated by $SCRIPTNAME

default=$DEFAULT

timeout=10

splashimage=${GRUB_ROOT_PART}${INSTALL_BOOT_DIR}/grub/splash.xpm.gz

#hiddenmenu

EOF

    if [ $UP_installed ]; then

        echo "Add entry for UP kernel into grub.conf"

        cat >> $NEW/boot/grub/grub.conf <<EOF

title $TITLE (${KERNEL_VERSION})

        root $GRUB_ROOT_PART

        kernel ${INSTALL_BOOT_DIR}/vmlinuz-$KERNEL_VERSION ro root=$INSTALL_PART

        initrd ${INSTALL_BOOT_DIR}/initrd-$KERNEL_VERSION.img

EOF

    fi

    if [ $SMP_installed ]; then

        echo "Add entry for SMP kernel into grub.conf"

        cat >> $NEW/boot/grub/grub.conf <<EOF

title $TITLE (${KERNEL_VERSION}smp)

        root $GRUB_ROOT_PART

        kernel ${INSTALL_BOOT_DIR}/vmlinuz-${KERNEL_VERSION}smp ro root=$INSTALL_PART

        initrd ${INSTALL_BOOT_DIR}/initrd-${KERNEL_VERSION}smp.img

EOF

    fi

    if [ $WIN_installed ]; then

        echo "Add entry for Windows into grub.conf"

        cat >> $NEW/boot/grub/grub.conf <<EOF

title Windows

        rootnoverify $GRUB_WIN_PART

        chainloader +1

EOF

    fi

    chmod 600 $NEW/boot/grub/grub.conf

    ln -s ../boot/grub/grub.conf $NEW/etc/grub.conf

    ln -s ./grub.conf $NEW/boot/grub/menu.lst

    echo "done."; echo

    ### create /etc/sysconfig/grub file

    ### -----------------------------------------------------------

    cat > $NEW/etc/sysconfig/grub <<EOF    

boot=$INSTALL_DEV

forcelba=0

EOF

fi

### install kernel and other files into /boot

### -----------------------------------------------------------

echo "Install kernel(s) ..."

[ -e /boot/vmlinuz ]      && BOOT_DIR=/boot

[ -e /boot/boot/vmlinuz ] && BOOT_DIR=/boot/boot

if [ ! $BOOT_DIR ]; then

    echo "ERROR: No kernel found - installation failed"; echo

    exit_now 1

fi

cp -a $BOOT_DIR/vmlinuz            $NEW/boot/vmlinuz-${KERNEL_VERSION}

cp -a $BOOT_DIR/vmlinuzs           $NEW/boot/vmlinuz-${KERNEL_VERSION}smp  2>/dev/null

cp -a $BOOT_DIR/System.map-*       $NEW/boot/

cp -a $BOOT_DIR/config-*           $NEW/boot/

cp -a $BOOT_DIR/symvers-*.gz       $NEW/boot/        2>/dev/null

cp -a $BOOT_DIR/grub/splash.xpm.gz $NEW/boot/grub/   2>/dev/null

cp -a $BOOT_DIR/message.ja         $NEW/boot/        2>/dev/null

cp -a $BOOT_DIR/message            $NEW/boot/        2>/dev/null

echo "done."; echo

### create /etc/sysconfig/kernel file

### -----------------------------------------------------------

cat > $NEW/etc/sysconfig/kernel <<EOF    

# UPDATEDEFAULT specifies if new-kernel-pkg should make

# new kernels the default

UPDATEDEFAULT=yes

# DEFAULTKERNEL specifies the default kernel package type

DEFAULTKERNEL=kernel

EOF

### create /etc/fstab

### -----------------------------------------------------------

cat > $NEW/etc/fstab <<EOF

$INSTALL_PART	/		$FS_TYPE		defaults	1 1

EOF

if [ -z "$INSTALL_BOOT_DIR" ]; then

   echo "$INSTALL_DEV	/boot		$FS_TYPE		defaults	1 2" >> $NEW/etc/fstab

fi

cat >> $NEW/etc/fstab <<EOF

devpts          /dev/pts        devpts          gid=5,mode=620  0 0

tmpfs	        /dev/shm        tmpfs           defaults        0 0

proc	        /proc           proc            defaults        0 0

sysfs		/sys            sysfs           defaults        0 0

EOF

if [ "$SWAP_PART" ]; then

    for SWAP_PARTITION in $SWAP_PART ; do

        echo "$SWAP_PARTITION	swap		swap		defaults,pri=1	0 0" >> $NEW/etc/fstab

    done

fi

### make initrd 

### (needs $NEW/etc/fstab to find correct modules for root filesystem !!)

### -----------------------------------------------------------

echo "Create initrd(s) ..."

# initrd should not be build on tmpfs (we take $NEW/tmp instead of /tmp)

sed -i "s|^TMPDIR=.*|TMPDIR=\"$NEW/tmp\"|" /usr/sbin/livecd-mkinitrd

if [ $UP_installed ]; then

    depmod -a ${KERNEL_VERSION}

    /usr/sbin/livecd-mkinitrd --fstab=$NEW/etc/fstab \

                    $NEW/boot/initrd-${KERNEL_VERSION}.img ${KERNEL_VERSION}

    if [ ! -e $NEW/boot/initrd-${KERNEL_VERSION}.img ]; then

        echo "ERROR: Failed to create $NEW/boot/initrd-${KERNEL_VERSION}.img"

        exit_now 1

    fi

fi

if [ $SMP_installed ]; then

    depmod -a ${KERNEL_VERSION}smp

    /usr/sbin/livecd-mkinitrd --fstab=$NEW/etc/fstab \

                    $NEW/boot/initrd-${KERNEL_VERSION}smp.img ${KERNEL_VERSION}smp

    if [ ! -e $NEW/boot/initrd-${KERNEL_VERSION}smp.img ]; then

        echo "ERROR: Failed to create $NEW/boot/initrd-${KERNEL_VERSION}smp.img"

        exit_now 1

    fi

fi

echo "done."; echo

### remove LiveCD init.d scripts

### -----------------------------------------------------------

for file in $LIVECD_INIT_SCRIPTS; do

    rm -f $NEW/etc/rc.d/init.d/$file

    for n in 0 1 2 3 4 5 6; do

	rm -f $NEW/etc/rc.d/rc${n}.d/*$file

    done

done

### restore cronjobs

### -----------------------------------------------------------

mv $NEW/etc/cron_backup/sysstat       $NEW/etc/cron.d/ 2>/dev/null

mv $NEW/etc/cron_backup/cfengine      $NEW/etc/cron.d/ 2>/dev/null

mv $NEW/etc/cron_backup/psi-cronjobs  $NEW/etc/cron.d/ 2>/dev/null

mv $NEW/etc/cron_backup/00-makewhatis.cron.weekly $NEW/etc/cron.weekly/00-makewhatis.cron 2>/dev/null

mv $NEW/etc/cron_backup/*             $NEW/etc/cron.daily/ 2>/dev/null

### prepare chroot to $NEW

### -----------------------------------------------------------

mount --bind /dev $NEW/dev

mount --bind /sys $NEW/sys

mount -t proc proc $NEW/proc

### turn on kudzu again

### -----------------------------------------------------------

chroot $NEW chkconfig kudzu on

### turn on check_update again (only at PSI)

### -----------------------------------------------------------

chroot $NEW chkconfig check_update on 2>/dev/null

### fix some services which were disabled 

### because of diskless NFS client

### -----------------------------------------------------------

if [ -e /$MOUNTDIR/service.on ]; then

    cat /$MOUNTDIR/service.on | while read $serv; do

        chroot $NEW chkconfig $serv on

    done

fi

### remove some files

### -----------------------------------------------------------

rm -rf $NEW/usr/share/applications/livecd-install-gui.desktop

rm -rf $NEW/usr/share/applications/save-localdata.desktop

### remove RPMs that can break future updates  

### -----------------------------------------------------------

if [ ! $NORPMREMOVE ]; then

    echo "Remove RPMs that may break future updates ..."

    chroot $NEW rpm -qa 2>/dev/null > /tmp/rpmlist

    # Scientific Linux RPMs

    RPMSTOREMOVE="$RPMS_TO_REMOVE $RPMS_TO_REMOVE_SL"

    # PSI Scientific Linux RPMs

    if [ -e /etc/sysconfig/psi ]; then

        RPMSTOREMOVE="$RPMS_TO_REMOVE $RPMS_TO_REMOVE_PSI"

    fi

    for rpm in $RPMSTOREMOVE; do

        rpms_remove=$( cat /tmp/rpmlist | grep "^$rpm" )

        for rpm_remove in $rpms_remove; do        

            chroot $NEW rpm -e --nodeps $rpm_remove >/dev/null 2>&1

            [ "$?" = "0" ] && echo " removing $rpm_remove"

        done

    done

    echo "done."; echo

fi

### disable nvidia driver 

### -----------------------------------------------------------

# not in case of a PSI installation

if [ ! -e /etc/sysconfig/psi ]; then

    if [ -e $NEW/etc/X11/xorg.conf.nv_SAVED ]; then

        echo "Remove nvidia driver and correct xorg.conf ..."

        # correct xorg.conf

        sed -i "s/#nv_SAVED //" $NEW/etc/X11/xorg.conf

        sed -i "/.*Driver.*nvidia.*/d" $NEW/etc/X11/xorg.conf

        # disable nvidia libs (if not yet done by rpm -e)

        LIB=lib

        [ $( arch ) = "x86_64" ] && LIB=lib64

        mv -f $NEW/usr/X11R6/$LIB/modules/extensions/xxx.libGLcore.a.saved_by_nvidia \

              $NEW/usr/X11R6/$LIB/modules/extensions/libGLcore.a 2>/dev/null

        mv -f $NEW/usr/X11R6/$LIB/modules/extensions/xxx.libglx.a.saved_by_nvidia \

              $NEW/usr/X11R6/$LIB/modules/extensions/libglx.a 2>/dev/null

        rm -f $NEW/usr/X11R6/$LIB/modules/extensions/libglx.so

        rm -f $NEW/usr/X11R6/$LIB/libGL.so*

        rm -f $NEW/usr/$LIB/libGLcore.so

        echo "done."; echo

    fi

fi

### install grub for the 2. time, if it failed before 

### (happens on xfs filesystem)

### -----------------------------------------------------------

if [ ! $NOGRUB ] && [ $GRUB_FAILED ]; then

    echo "Run grub-install for the 2. time ... "

    mkdir -p $NEW/boot/grub

    if [ $FLOPPY ]; then

        grub-install --root-directory=$NEW $MBR_DEV

    else

        grub-install --no-floppy --root-directory=$NEW $MBR_DEV

    fi

    echo "done."; echo

fi

### umount $INSTALL_PART

### -----------------------------------------------------------

umount $NEW/dev

umount $NEW/sys

umount $NEW/proc

UMOUNT_LIST=`df -l | grep "$NEW" | sed -e 's/  */ /g' | cut -d" " -f6 | sort -r`

umount $UMOUNT_LIST

### print summary

### -----------------------------------------------------------

echo                     "--------------------------------------------------------------"

echo                     "  LiveCD installed on partition $INSTALL_PART"

[ "$SWAP_PART" ] && echo "  Partition(s) $SWAP_PART will be used as swap partition(s)"

echo

[ ! $NOGRUB ]    && echo "  GRUB installed in Master Boot Record (MBR) of $MBR_DEV"

[ ! $NOGRUB ]    && echo "  MBR saved as $MBR_FILENAME on $INSTALL_PART and in /tmp"

[ ! $NOGRUB ]    && echo "  If you have to restore MBR, execute under Linux:"

[ ! $NOGRUB ]    && echo "  # dd if=$MBR_FILENAME of=$MBR_DEV bs=512 count=1"

echo 

[ $WIN_PART ]    && echo "  Entry created in grub.conf for Windows partition $WIN_PART"

echo                     "--------------------------------------------------------------"

echo                     "End of $SCRIPTNAME"

echo