WebSVN – livecd – Diff – /trunk/customize/livecd-install

               /media"
 # Mount point of the new SL system
 NEW=/mnt/harddisk
+# Name of the script
 SCRIPTNAME=$( basename $0 )
 ###############################################################
 # Functions
 ###############################################################
 function usage() {
-   Installes LiveCD on PARTITION and the boot loader grub
+    Installes LiveCD on PARTITION and the boot loader grub
-   into the Master Boot Record (MBR) of DEVICE.
+    into the Master Boot Record (MBR) of DEVICE.
-   OPTIONS:
+  OPTIONS:
-    -h                  print this screen
+    -h   --help         print this screen
-    -swap [partition]  	use [partition] as swap
+    -swap [partition]   use [partition] as swap
     -nogrub             do not install grub (leave MBR untouched)
-    -floppy             need, if grub should be isntalled on a floopy
+    -floppy             needed, if grub should be installed on floppy
     -y                  answer all questions with yes
+  Example:
+  $SCRIPTNAME -swap /dev/sda3 -mbr /dev/sda /dev/sda2
+    Will install LiveCD on /dev/sda2 (= second partition on
+    first SATA disk). All data on /dev/sda2 will be deleted.
+    /dev/sda3 has to be a Linux Swap partion. GRUB will be
+    installed in the MBR of /dev/sda (= first SATA disk).
 EOF
+}
+function exit_now() {
+    local exitcode=$1
+    umount $INSTALL_PART 2>/dev/null
+    exit $exitcode
+}
 ###############################################################
 # Main
 ###############################################################
 ### are we root?
 ### -----------------------------------------------------------
 if [ "$( whoami )" != "root" ]; then
     echo "Please run this script as root."
-    # exit 1
+    exit_now 1
 fi
 ### read options from command-line
 ### -----------------------------------------------------------
 while [ $# -gt 0 ]; do
     case "$1" in
        -h)
+            usage; exit_now;;
+       --help)
-            usage; exit;;
+            usage; exit_now;;
        -swap)
             shift; SWAP_PART=$1; shift; continue;;
        -mbr)
             shift; MBR_DEV=$1; shift; continue;;
        -nogrub)
 ### -----------------------------------------------------------
 if [ ! $NOGRUB ]; then
     if [ ! $MBR_DEV ]; then
 	echo "No MBR device defined."
 	echo "Please see '$SCRIPTNAME -h'."; echo
-	exit 1
+	exit_now 1
     fi
 fi
-### test if $INSTALL_PART defined and exists
+### test if $INSTALL_PART is defined and exists
 ### -----------------------------------------------------------
 if [ ! $INSTALL_PART ]; then
     echo "No partition defined for installation"
     echo "Please see '$SCRIPTNAME -h'."; echo
-    exit 1
+    exit_now 1
 fi
 ### test if $INSTALL_PART exists
 ### -----------------------------------------------------------
 fdisk -l | cut -d" " -f1 | grep -q "^${INSTALL_PART}$"
 if [ "$?" != "0" ]; then
     echo "Partition $INSTALL_PART not found! (see 'disk -l')"; echo
-    exit 1
+    exit_now 1
 fi
 ### set $INSTALL_DEV (eg. /dev/sda)
 ### -----------------------------------------------------------
 ### -----------------------------------------------------------
 if [ $SWAP_PART ]; then
     fdisk -l | cut -d" " -f1 | grep -q "^${SWAP_PART}$"
     if [ "$?" != "0" ]; then
 	echo "Swap partition $SWAP_PART not found! (see 'disk -l')"; echo
-	exit 1
+	exit_now 1
     fi
     fdisk -l | grep "Linux swap" | cut -d" " -f1 | grep -q "^${SWAP_PART}$"
     if [ "$?" != "0" ]; then
 	echo "Partition $SWAP_PART is not a Linux swap partition! (see 'disk -l')"; echo
-	exit 1
+	exit_now 1
     fi
 fi
 ### print warning
 ### -----------------------------------------------------------
 if [ ! $YES ]; then
     echo -n "Continue (y/N)? "
     read key
     echo
-    [ "$key" != "y" ] && exit 0
+    [ "$key" != "y" ] && exit_now 0
 fi
 echo
+### Backup MBR
+### -----------------------------------------------------------
+### to do !!!!!!!!!!
+###
 ### format $INSTALL_PART
 ### -----------------------------------------------------------
 echo -n "Format $INSTALL_PART, please wait ... "
-mkfs.ext3 -q $INSTALL_PART || exit 1
+mkfs.ext3 -q $INSTALL_PART || exit_now 1
 echo "done."; echo
 ### mount $INSTALL_PART
 ### -----------------------------------------------------------
 echo -n "Try to mount $INSTALL_PART to $NEW ... "
 mkdir -p $NEW
-mount $INSTALL_PART $NEW || exit 1
+mount $INSTALL_PART $NEW || exit_now 1
 echo "done."; echo
 ### copy root dirs
 ### -----------------------------------------------------------
 	fi
     done
     # do not copy links
     [ -L /$dir ] && do_not_copy="yes"
+    fail=""
     if [ ! $do_not_copy ]; then
 	echo -n "  * Copy  /$dir ... "
-	cp -a /$dir $NEW
+	cp -a /$dir $NEW || fail=true
 	echo "done."
     fi
 done
 echo
+if [ $fail ]; then
+    echo "ERROR: Not everything was copied to $INSTALL_PART"
+    exit_now 1
+fi
 ### move /usr/opt back to /opt
 ### -----------------------------------------------------------
 if [ -d $NEW/usr/opt ]; then
     [ -r $NEW/${file}.ori ] && cp -a $NEW/${file}.ori $NEW/${file}
 done
 echo "done."; echo
-### do some mounts for chroot $NEW
+### do some mounts for chroot $NEW (no more needed)
 ### -----------------------------------------------------------
-mount --bind /dev $NEW/dev
+# mount --bind /dev $NEW/dev
-mount --bind /sys $NEW/sys
+# mount --bind /sys $NEW/sys
-mount -t proc proc $NEW/proc
+# mount -t proc proc $NEW/proc
 ### install grub
 ### -----------------------------------------------------------
 echo "Run grub-install: "; echo
 rpm --quiet -q kernel-smp && SMP_installed=true
 [ $UP_installed ]  && KERNEL_VERSION=$( rpm -q --qf "%{V}-%{R}" kernel 2>/dev/null )
 [ $SMP_installed ] && KERNEL_VERSION=$( rpm -q --qf "%{V}-%{R}" kernel-smp  2>/dev/null )
 if [ ! $KERNEL_VERSION ]; then
     echo "ERROR: Kernel version could not be determined - installation failed"; echo
-    exit 1
+    exit_now 1
 fi
-[ $UP_installed ]   && echo "UP kernel found."
-[ $SMP_installed ]  && echo "SMP kernel found."
-echo
 ### convert dev syntax to grub syntax
 ### -----------------------------------------------------------
 device_map=$NEW/boot/grub/device.map
 GRUB_WIN_PART=(hd0,0)
 ### create grub.conf file
 ### -----------------------------------------------------------
-echo "Create grub.conf"
+echo "Create grub.conf:"
 cat > $NEW/boot/grub/grub.conf <<EOF
 # grub.conf generated by $SCRIPTNAME
 default=0
 timeout=5
 echo "done."; echo
 ### install kernel into /boot
 ### -----------------------------------------------------------
-echo "Install kernel(s)"
+echo "Install kernel(s) ..."
 [ -e /boot/vmlinuz ]      && BOOT_DIR=/boot
 [ -e /boot/boot/vmlinuz ] && BOOT_DIR=/boot/boot
 if [ ! $BOOT_DIR ]; then
     echo "ERROR: No kernel found - installation failed"; echo
-    exit 1
+    exit_now 1
 fi
 cp -a $BOOT_DIR/vmlinuz            $NEW/boot/vmlinuz-${KERNEL_VERSION}
 cp -a $BOOT_DIR/vmlinuzs           $NEW/boot/vmlinuz-${KERNEL_VERSION}smp  2>/dev/null
 cp -a $BOOT_DIR/System.map-*       $NEW/boot/
 cp -a $BOOT_DIR/config-*           $NEW/boot/
 cp -a $BOOT_DIR/grub/splash.xpm.gz $NEW/boot/grub/
 echo "done."; echo
+### create /etc/fstab
+### -----------------------------------------------------------
+cat > $NEW/etc/fstab <<EOF
+$INSTALL_PART         /                    ext3    defaults        1 1
+devpts            /dev/pts             devpts  gid=5,mode=620  0 0
+tmpfs             /dev/shm             tmpfs   defaults        0 0
+proc              /proc                proc    defaults        0 0
+sysfs             /sys                 sysfs   defaults        0 0
+EOF
+if [ $SWAP_PART ]; then
+    echo "$SWAP_PART         swap                 swap    defaults        0 0" >> $NEW/etc/fstab
+fi
 ### make initrd
+### (needs $NEW/etc/fstab to find correct modules for root filesystem !!)
 ### -----------------------------------------------------------
-echo "Create initrd(s)"
+echo "Create initrd(s) ..."
 if [ $UP_installed ]; then
-    chroot $NEW depmod -a
+    depmod -a ${KERNEL_VERSION}
-    chroot $NEW \
+    livecd-mkinitrd --fstab=$NEW/etc/fstab \
-    livecd-mkinitrd $NEW/boot/initrd-${KERNEL_VERSION}.img ${KERNEL_VERSION}
+                    $NEW//boot/initrd-${KERNEL_VERSION}.img ${KERNEL_VERSION}
     if [ ! -e $NEW/boot/initrd-${KERNEL_VERSION}.img ]; then
 	echo "ERROR: Failed to create $NEW/boot/initrd-${KERNEL_VERSION}.img"
-	exit 1
+	exit_now 1
     fi
 fi
 if [ $SMP_installed ]; then
-    chroot $NEW depmod -a
+    depmod -a ${KERNEL_VERSION}smp
-    chroot $NEW \
+    livecd-mkinitrd --fstab=$NEW/etc/fstab \
-    livecd-mkinitrd $NEW/boot/initrd-${KERNEL_VERSION}smp.img ${KERNEL_VERSION}smp
+                    $NEW/boot/initrd-${KERNEL_VERSION}smp.img ${KERNEL_VERSION}smp
     if [ ! -e $NEW/boot/initrd-${KERNEL_VERSION}smp.img ]; then
 	echo "ERROR: Failed to create $NEW/boot/initrd-${KERNEL_VERSION}smp.img"
-	exit 1
+	exit_now 1
     fi
 fi
 echo "done."; echo
-### create /etc/fstab
-### -----------------------------------------------------------
-cat > $NEW/etc/fstab <<EOF
-$INSTALL_PART         /                    ext3    defaults        1 1
-devpts            /dev/pts             devpts  gid=5,mode=620  0 0
-tmpfs             /dev/shm             tmpfs   defaults        0 0
-proc              /proc                proc    defaults        0 0
-sysfs             /sys                 sysfs   defaults        0 0
-EOF
-if [ $SWAP_PART ]; then
-    echo "$SWAP_PART         swap                 swap    defaults        0 0" >> $NEW/etc/fstab
-fi
 ### remove LiveCD init.d scripts
 ### -----------------------------------------------------------
 for file in $LIVECD_INIT_SCRIPTS; do
     rm -f $NEW/etc/init.d/$file
     for n in 0 1 2 3 4 5 6; do
 chkconfig kudzu on
 ### umount $INSTALL_PART
 ### -----------------------------------------------------------
-umount $NEW/dev
-umount $NEW/sys
-umount $NEW/proc
 umount $INSTALL_PART

Subversion Repositories livecd

(root)/trunk/customize/livecd-install @ 21 – Rev 18 → 21