WebSVN – livecd – Diff – /trunk/customize/livecd-install


#!/bin/bash
#
###############################################################
#
# Installes the LiveCD on local hard disk
# 
# Boot LiveCD and run this script as root
#
# Urs Beyerle
# Brent L. Bates
#
###############################################################
 
 
###############################################################
# Definitions
###############################################################
 
# set PATH
PATH="/usr/bin:/usr/sbin:/bin:/sbin:/usr/X11R6/bin"
 
# RPMs that are no longer needed and may break future udpates
RPMS_TO_REMOVE="kernel-module-squashfs \
                kernel-module-unionfs \
                kernel-module-aufs \
                unionfs-.* \
                aufs-.* \
                squashfs-.*"
 
# RPMs that can break future Scientific Linux updates
# because there are not part of Scientific Linux
RPMS_TO_REMOVE_SL=""
                   
# RPMs that can break future PSI SL updates
# because there are not part of PSI Scientific Linux
RPMS_TO_REMOVE_PSI=""
                   
# files which should be restored from .ori files
FILES_RESTORE="/etc/init.d/netfs \
           /etc/init.d/autofs \
           /etc/init.d/halt \
           /etc/init.d/network
           /etc/init.d/functions \
           /etc/rc.d/rc.sysinit \
           /etc/sysconfig/afs \
           /etc/motd \
           /etc/redhat-release \
           /etc/rc.d/rc.local"
 
# LiveCD init scripts will be removed
LIVECD_INIT_SCRIPTS="runfirst \
                    runveryfirst \
                    runlast \
                    kudzu-auto \
                    login"
 
# Main directories which should be not be copied
DIR_NOT_COPY="/proc \
              /dev \
              /livecd \
              /boot \
              /afs \
              /sys \
              /media \
              /misc \
              /mnt \
              /net \
              /initrd"
 
# Mount point of the new SL system
NEW=/mnt/harddisk
 
# Name of the script
SCRIPTNAME=$( basename $0 )
 
# dir of mounted /$MOUNTDIR/live
MOUNTDIR=livecd
 
# Default File System Type
FS_TYPE=ext3
 
 
###############################################################
# Functions
###############################################################
 
function usage() {
 
   ## Usage
   # ----------------------------------------------------------
 
   cat <<EOF
   
  $SCRIPTNAME [OPTIONS] -mbr=[DEVICE] [PARTITION | MOUNTED FILE SYSTEM]
 
    Installes LiveCD on PARTITION and the bootloader grub into 
    the Master Boot Record (MBR) of DEVICE. The MBR will be 
    backed up to PARTITION.
 
  OPTIONS:
 
    -h   --help          : Print this screen
    -swap=[partition(s)] : Use [partition(s)] as swap ("," or "|" separated)
    -win=[partition]     : Your active Windows partition. If not given, 
                           $SCRIPTNAME tries to find it
    -nogrub              : Do not install grub. You have to install 
                           manually a bootloader (not recommended)
    -floppy              : Needed, if grub should be installed on floppy
                           In this case use -mbr=/dev/fd0 -floppy
    -norpmremove         : Do not remove RPMs that can break future 
                           updates (not recommended)
    -fstype              : File system type (ext3,xfs,etc.), default is $FS_TYPE
    -y                   : Answer all questions with yes
 
  Example:
 
  $SCRIPTNAME -swap=/dev/sda3 -mbr=/dev/sda /dev/sda2
 
    Will install LiveCD on /dev/sda2 (= second partition on 
    first SATA disk). All data on /dev/sda2 will be deleted.
    /dev/sda3 has to be a Linux Swap partion. GRUB will be 
    installed in the MBR of /dev/sda (= first SATA disk).
   
  Remarks:
 
    To display your hard disk partitions, user 'fdisk -l'.
    Use fdisk, qtparted or parted to create an empty Linux
    partition.
 
EOF
}
 
 
function exit_now() {
 
    local exitcode=$1
    umount $INSTALL_PART 2>/dev/null
    exit $exitcode
}
 
 
 
###############################################################
# Main
###############################################################
 
### are we root?
### -----------------------------------------------------------
if [ "$( whoami )" != "root" ]; then
    echo; echo "Please run this script as root: 'su - -c $SCRIPTNAME'"; echo
    exit_now 1
fi
 
 
### read options from command-line
### -----------------------------------------------------------
while [ $# -gt 0 ]; do
 
    case "$1" in
       -h)
            usage; exit_now;;
 
       --help)
            usage; exit_now;;
 
       -swap*)
           if echo $1 | grep -q '=' ; then
               SWAP_PART=$( echo $1 | sed 's/^-swap=//' )
           else
               shift
               SWAP_PART=$1
           fi
           ;;
 
       -mbr*)
           if echo $1 | grep -q '=' ; then
               MBR_DEV=$( echo $1 | sed 's/^-mbr=//' )
           else
               shift
               MBR_DEV=$1
           fi
           MBR_DEV=$( echo "$MBR_DEV" | sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )
           ;;
 
       -win*)
           if echo $1 | grep -q '=' ; then
               WIN_PART=$( echo $1 | sed 's/^-win=//' )
           else
               shift
               WIN_PART=$1
           fi
           ;;
 
       -nogrub)
            NOGRUB=$1;;
 
       -norpmremove)
            NORPMREMOVE=$1;;
 
       -floppy)
            FLOPPY=$1;;
 
       -fstype)
            shift
	    FS_TYPE=$1;;
 
       -y)
            YES=$1;;
 
       *)
            INSTALL_PART=$1;;
    esac
 
    shift
 
done
echo
 
 
### display fdisk -l
### -----------------------------------------------------------
echo "Output of 'fdisk -l' ..."
fdisk -l 2>/dev/null
echo
 
 
### test if $INSTALL_PART is defined
### -----------------------------------------------------------
if [ ! $INSTALL_PART ]; then
    echo "No partition defined for installation."
    echo "Please see '$SCRIPTNAME -h'."; echo
    exit_now 1
fi
 
 
### test if MBR_DEV is given
### -----------------------------------------------------------
if [ ! $NOGRUB ]; then
    if [ ! $MBR_DEV ]; then
        echo "No MBR device defined."
        echo "Please see '$SCRIPTNAME -h'."
        echo
        exit_now 1
    fi
fi
 
 
### test if $INSTALL_PART is mounted
### -----------------------------------------------------------
df -T -l | sed -e 's/  */ /g' | grep -q "${INSTALL_PART}"
 
if [ "$?" = "0" ]; then
   ### This is a mounted partition
   ### -----------------------------------------------------------
   MOUNTED=1
 
   df -T -l | sed -e 's/  */ /g' | cut -d" " -f7 | grep -q "^${INSTALL_PART}$"
   if [ "$?" = "0" ]; then
 
      ### Was given the mount point
      ### -----------------------------------------------------------
      NEW=${INSTALL_PART}
      INSTALL_PART=`df -T -l | grep "${INSTALL_PART}$" | cut -d" " -f1`
   else
 
      ### Was given the mount partition
      ### -----------------------------------------------------------
      NEW=`df -T -l | grep "^${INSTALL_PART}" | sed -e 's/  */ /g' | cut -d" " -f7`
   fi
   FS_TYPE=`df -T -l | sed -e 's/  */ /g' | grep "^${INSTALL_PART}" | cut -d" " -f2`
 
   ### Get boot defice information
   ###    Check for separate mounted boot partition
   ### -----------------------------------------------------------
   INSTALL_DEV=`df -T -l | sed -e 's/  */ /g' | grep "boot$" | cut -d" " -f1`
   if [ "$?" = "0" ]; then
      ###    Separate boot partition
      ### -----------------------------------------------------------
      INSTALL_BOOT_DIR=""
   else
      ###    Install and boot all one partition
      ### -----------------------------------------------------------
      INSTALL_DEV=${INSTALL_PART}
      INSTALL_BOOT_DIR="/boot"
   fi
 
   ### Is the boot device a RAID device
   ### -----------------------------------------------------------
   mdadm -D $INSTALL_DEV 2>/dev/null | grep -q -i Version
   if [ "$?" = "0" ]; then
      ### Boot device is RAID
      ### -----------------------------------------------------------
      BOOT_DRIVE=`mdadm -D $INSTALL_DEV | grep -v ':$' | grep "/dev/" | sed -e 's/  */ /g' | cut -d" " -f8 |head -1`
      INSTALL_PART_NR=$( echo "$BOOT_DRIVE" | sed -e 's%.*/[sh]d[a-z]\([0-9]*\)$%\1%' )
      BOOT_DRIVE=$( echo "$BOOT_DRIVE" | sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )
   else
      ### Boot device not RAID
      ### -----------------------------------------------------------
      INSTALL_PART_NR=$( echo "$INSTALL_DEV" | sed -e 's%.*/[sh]d[a-z]\([0-9]*\)$%\1%' )
      INSTALL_DEV=$( echo "$INSTALL_DEV" | sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )
      BOOT_DRIVE=$INSTALL_DEV
   fi
else
   ### Partition is NOT mounted
   ### -----------------------------------------------------------
   MOUNTED=0
 
   ### test if $INSTALL_PART exists
   ### -----------------------------------------------------------
   fdisk -l 2>/dev/null | cut -d" " -f1 | grep -q "^${INSTALL_PART}$"
   if [ "$?" != "0" ]; then
       echo "Partition $INSTALL_PART not found! See 'fdisk -l'."
       echo "Or you have to reboot first to make the partition table active." 
       echo
       exit_now 1
   fi
 
 
   ### test if $INSTALL_PART is a Linux partition
   ### -----------------------------------------------------------
   fdisk -l 2>/dev/null | grep "Linux$" | cut -d" " -f1 | grep -q "^${INSTALL_PART}$"
   if [ "$?" != "0" ]; then
       echo "Partition $INSTALL_PART is not a Linux partition! (see 'fdisk -l')."
       echo "Use fdisk and/or qtparted to create a Linux partition!"
       echo "You have to reboot first to make the partition table active."
       echo
       exit_now 1
   fi
 
   ### set $INSTALL_DEV (eg. /dev/sda)
   ### -----------------------------------------------------------
   INSTALL_DEV=$( echo "$INSTALL_PART" | sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )
   BOOT_DRIVE=$INSTALL_DEV
   INSTALL_PART_NR=$( echo "$INSTALL_PART" | sed -e 's%.*/[sh]d[a-z]\([0-9]*\)$%\1%' )
   INSTALL_BOOT_DIR="/boot"
fi
 
 
### test if $SWAP_PART exists and is a Linux Swap partition
### -----------------------------------------------------------
if [ "$SWAP_PART" ]; then
    SWAP_PART=`echo ${SWAP_PART} |tr '[,|]' ' '`
    for SWAP_PARTITION in $SWAP_PART ; do
       fdisk -l 2>/dev/null | cut -d" " -f1 | grep -q "^${SWAP_PARTITION}$"
       if [ "$?" != "0" ]; then
           echo "Swap partition $SWAP_PARTITION not found! (see 'fdisk -l')."
           echo "Or you have to reboot first to make the partition table active."
           echo
           exit_now 1
       fi
       fdisk -l 2>/dev/null | grep "Linux swap" | cut -d" " -f1 | grep -q "^${SWAP_PARTITION}$"
       if [ "$?" != "0" ]; then
           echo "Partition(s) $SWAP_PARTITION is/are not a Linux swap partition! (see 'fdisk -l')."
           echo "Use fdisk and/or qtparted to create a Linux Swap partition !"
           echo "You have to reboot first to make the partition table active."
           echo
           exit_now 1
       fi
    done
fi
 
 
### print warning
### -----------------------------------------------------------
echo                     "------------------------------------------------------------"
echo                     "   LiveCD will be installed on partition $INSTALL_PART"
[ "$SWAP_PART" ] && echo " Partition(s) $SWAP_PART will be used as swap partition(s)."
[ ! $NOGRUB ]    && echo " GRUB will be installed in Master Boot Record of $MBR_DEV"
echo                     "       !! All data on $INSTALL_PART will be lost !!"
echo                     "------------------------------------------------------------"
echo
 
 
### continue?
### -----------------------------------------------------------
if [ ! $YES ]; then
    echo -n "Continue (y/N)? "
    read key
    echo
    [ "$key" != "y" ] && exit_now 0
fi
 
 
### format $SWAP_PART (don't format swap, if already formated)
### -----------------------------------------------------------
if [ "$SWAP_PART" ]; then
    echo "Make swap on $SWAP_PART ..."
    swapoff -a >/dev/null 2>&1
    swapon -p 1 $SWAP_PART 2>/dev/null
    if [ "$?" != "0" ]; then
        for SWAP_PARTITION in $SWAP_PART; do
           echo "Format $SWAP_PARTITION as swap." 
           mkswap $SWAP_PARTITION
        done
    fi
    echo
fi
 
 
if [ $MOUNTED = "0" ]; then
    ### format $INSTALL_PART
    ### -----------------------------------------------------------
 
    # define force option for mkfs command
    FORCE=""
    [ "$FS_TYPE" = "xfs" ] && FORCE="-f"
    
    echo -n "Format $INSTALL_PART as $FS_TYPE, please wait ... " 
    mkfs.$FS_TYPE $FORCE -q $INSTALL_PART || exit_now 1
    echo "done."; echo
 
    ### mount $INSTALL_PART
    ### -----------------------------------------------------------
    echo -n "Try to mount $INSTALL_PART to $NEW ... "
    mkdir -p $NEW
    mount $INSTALL_PART $NEW || exit_now 1
    echo "done."; echo
fi
 
 
### copy root dirs
### -----------------------------------------------------------
echo "Copy Live System to $INSTALL_PART ..."
root_dirs=$( ls / )
for dir in $root_dirs; do
    # check if dir is not in $DIR_NOT_COPY
    do_not_copy=""
    for not_dir in $DIR_NOT_COPY; do
        if [ "$not_dir" = "/$dir" ]; then 
            do_not_copy="yes"
            break
        fi
    done
    # do not copy links
    [ -L /$dir ] && do_not_copy="yes"
 
    fail=""
    if [ ! $do_not_copy ]; then
        echo -n "  * Copy  /$dir ... "
	# first delete $dir on hardisk
	rm -rf $NEW/$dir
        cp -a -f /$dir $NEW || fail=true
        echo "done."
    fi
    fail=""
done
echo
if [ $fail ]; then
    echo "ERROR: Not everything was copied to $INSTALL_PART"
    exit_now 1
fi
 
 
### move /usr/opt back to /opt
### -----------------------------------------------------------
if [ -d $NEW/usr/opt ]; then
    echo -n "Move /opt back ... "
    mv $NEW/usr/opt $NEW/
    echo "done."; echo
fi
 
 
### create dirs which were not copied
### -----------------------------------------------------------
for dir in $DIR_NOT_COPY; do
   if [ ! -d $NEW$dir ]; then
       mkdir $NEW$dir
   fi
done
# we do not need this directory
rmdir $NEW/livecd
# if not yet existing, create
mkdir -p $NEW/srv
mkdir -p $NEW/selinux
 
 
### copy back original files
### -----------------------------------------------------------
echo -n "Restore original files ... " 
for file in $FILES_RESTORE; do
    [ -r $NEW${file}.ori ] && mv -f $NEW${file}.ori $NEW${file} 
done
echo "done."; echo
 
 
### define kernel version
### -----------------------------------------------------------
rpm --quiet -q kernel     && UP_installed=true
rpm --quiet -q kernel-smp && SMP_installed=true
[ $UP_installed ]  && KERNEL_VERSION=$( rpm -q --qf "%{V}-%{R}" kernel 2>/dev/null )
[ $SMP_installed ] && KERNEL_VERSION=$( rpm -q --qf "%{V}-%{R}" kernel-smp  2>/dev/null )
if [ ! $KERNEL_VERSION ]; then
    echo "ERROR: Kernel version could not be determined - installation failed"; echo
    exit_now 1
fi    
 
 
 
if [ ! $NOGRUB ]; then
 
    ### Backup Master Boot Record MBR
    ### -----------------------------------------------------------
    # do we have already a backup?
    MBR_FILENAME="MBR$( echo $MBR_DEV | tr / _ ).bak"
    if [ ! -e /tmp/$MBR_FILENAME ]; then
        echo "Backup Master Boot Record (MBR) of $MBR_DEV ..."
        dd if=$MBR_DEV of=/tmp/$MBR_FILENAME bs=512 count=1
    fi
    cp -a /tmp/$MBR_FILENAME $NEW/$MBR_FILENAME
    echo "MBR saved as $MBR_FILENAME on $INSTALL_PART and on /tmp"
    echo
 
 
    ### install grub
    ### -----------------------------------------------------------
    echo "Run grub-install ... "
    mkdir -p $NEW/boot/grub
    [ ! $FLOPPY ] && NO_FLOPPY_OPT="--no-floppy"
    grub-install $NO_FLOPPY_OPT --root-directory=$NEW $MBR_DEV 2>/dev/null || GRUB_FAILED="yes"
 
    if [ $GRUB_FAILED ]; then
	echo "grub installation failed. grub-install will run again at the end."
    else
	echo "done."
    fi
    echo
 
    ### check for device.map file 
    ### -----------------------------------------------------------
    DEVICE_MAP=$NEW/boot/grub/device.map
    if [ ! -e $NEW/boot/grub/device.map ]; then
        echo "ERROR: $NEW/boot/grub/device.map not found"
        exit_now 1
    fi
 
 
    ### convert dev syntax to grub syntax
    ### -----------------------------------------------------------
    GRUB_INSTALL_DEV=$( grep $BOOT_DRIVE $DEVICE_MAP | awk '{ print $1 }' )
    GRUB_ROOT_PART=$( echo "$GRUB_INSTALL_DEV" | sed "s%)$%,`expr $INSTALL_PART_NR - 1`)%" )
 
 
    ### find active Windows partition
    ### -----------------------------------------------------------
    if [ ! $WIN_PART ]; then
        # try to find active Windows partition
        WIN_PART=$( fdisk -l 2>/dev/null | awk '{ if ($2 == "*" && $7 ~ "NTFS") print $1 }' | head -1 )
    fi
 
    if [ $WIN_PART ]; then
        WIN_installed=true
        WIN_DISK=$( echo "$WIN_PART" | sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )
        WIN_PART_NR=$( echo "$WIN_PART" | sed -e 's%.*/[sh]d[a-z]\([0-9]*\)$%\1%' )
        # convert dev syntax to grub syntax
        GRUB_WIN_DEV=$( grep $WIN_DISK $DEVICE_MAP | awk '{ print $1 }' )
        GRUB_WIN_PART=$( echo "$GRUB_WIN_DEV" | sed "s%)$%,`expr $WIN_PART_NR - 1`)%" )
 
        # $GRUB_WIN_PART should be something like (hd0,0)
        echo "Found active Windows partition ( $WIN_PART = $GRUB_WIN_PART )" 
        echo "Will add entry for Windows in GRUB."
        echo
    fi
 
 
    ### create grub.conf file
    ### -----------------------------------------------------------
    echo "Create grub.conf ..."
 
    TITLE="Linux"
    [ -e $NEW/etc/redhat-release ] && TITLE=$( cat $NEW/etc/redhat-release )
 
    DEFAULT=0
    # set default=1, if smp kernel is running
    uname -r | grep -q smp
    [ "$?" = "0" ] && DEFAULT=1
 
    cat > $NEW/boot/grub/grub.conf <<EOF
# grub.conf generated by $SCRIPTNAME
default=$DEFAULT
timeout=10
splashimage=${GRUB_ROOT_PART}${INSTALL_BOOT_DIR}/grub/splash.xpm.gz
#hiddenmenu
EOF
 
    if [ $UP_installed ]; then
        echo "Add entry for UP kernel into grub.conf"
        cat >> $NEW/boot/grub/grub.conf <<EOF
title $TITLE (${KERNEL_VERSION})
        root $GRUB_ROOT_PART
        kernel ${INSTALL_BOOT_DIR}/vmlinuz-$KERNEL_VERSION ro root=$INSTALL_PART
        initrd ${INSTALL_BOOT_DIR}/initrd-$KERNEL_VERSION.img
EOF
    fi
 
    if [ $SMP_installed ]; then
        echo "Add entry for SMP kernel into grub.conf"
        cat >> $NEW/boot/grub/grub.conf <<EOF
title $TITLE (${KERNEL_VERSION}smp)
        root $GRUB_ROOT_PART
        kernel ${INSTALL_BOOT_DIR}/vmlinuz-${KERNEL_VERSION}smp ro root=$INSTALL_PART
        initrd ${INSTALL_BOOT_DIR}/initrd-${KERNEL_VERSION}smp.img
EOF
    fi
 
    if [ $WIN_installed ]; then
        echo "Add entry for Windows into grub.conf"
        cat >> $NEW/boot/grub/grub.conf <<EOF
title Windows
        rootnoverify $GRUB_WIN_PART
        chainloader +1
EOF
    fi
 
    chmod 600 $NEW/boot/grub/grub.conf
    ln -s ../boot/grub/grub.conf $NEW/etc/grub.conf
    ln -s ./grub.conf $NEW/boot/grub/menu.lst
    echo "done."; echo
 
 
    ### create /etc/sysconfig/grub file
    ### -----------------------------------------------------------
    cat > $NEW/etc/sysconfig/grub <<EOF    
boot=$INSTALL_DEV
forcelba=0
EOF
 
 
fi
 
 
### install kernel and other files into /boot
### -----------------------------------------------------------
echo "Install kernel(s) ..."
 
[ -e /boot/vmlinuz ]      && BOOT_DIR=/boot
[ -e /boot/boot/vmlinuz ] && BOOT_DIR=/boot/boot
 
if [ ! $BOOT_DIR ]; then
    echo "ERROR: No kernel found - installation failed"; echo
    exit_now 1
fi
 
cp -a $BOOT_DIR/vmlinuz            $NEW/boot/vmlinuz-${KERNEL_VERSION}
cp -a $BOOT_DIR/vmlinuzs           $NEW/boot/vmlinuz-${KERNEL_VERSION}smp  2>/dev/null
cp -a $BOOT_DIR/System.map-*       $NEW/boot/
cp -a $BOOT_DIR/config-*           $NEW/boot/
cp -a $BOOT_DIR/symvers-*.gz       $NEW/boot/        2>/dev/null
cp -a $BOOT_DIR/grub/splash.xpm.gz $NEW/boot/grub/   2>/dev/null
cp -a $BOOT_DIR/message.ja         $NEW/boot/        2>/dev/null
cp -a $BOOT_DIR/message            $NEW/boot/        2>/dev/null
 
echo "done."; echo
 
 
### create /etc/sysconfig/kernel file
### -----------------------------------------------------------
cat > $NEW/etc/sysconfig/kernel <<EOF    
# UPDATEDEFAULT specifies if new-kernel-pkg should make
# new kernels the default
UPDATEDEFAULT=yes
 
# DEFAULTKERNEL specifies the default kernel package type
DEFAULTKERNEL=kernel
EOF
 
 
### create /etc/fstab
### -----------------------------------------------------------
cat > $NEW/etc/fstab <<EOF
$INSTALL_PART	/		$FS_TYPE		defaults	1 1
EOF
 
if [ -z "$INSTALL_BOOT_DIR" ]; then
   echo "$INSTALL_DEV	/boot		$FS_TYPE		defaults	1 2" >> $NEW/etc/fstab
fi
 
cat >> $NEW/etc/fstab <<EOF
devpts          /dev/pts        devpts          gid=5,mode=620  0 0
tmpfs	        /dev/shm        tmpfs           defaults        0 0
proc	        /proc           proc            defaults        0 0
sysfs		/sys            sysfs           defaults        0 0
EOF
 
if [ "$SWAP_PART" ]; then
    for SWAP_PARTITION in $SWAP_PART ; do
        echo "$SWAP_PARTITION	swap		swap		defaults,pri=1	0 0" >> $NEW/etc/fstab
    done
fi
 
 
### make initrd 
### (needs $NEW/etc/fstab to find correct modules for root filesystem !!)
### -----------------------------------------------------------
echo "Create initrd(s) ..."
# initrd should not be build on tmpfs (we take $NEW/tmp instead of /tmp)
sed -i "s|^TMPDIR=.*|TMPDIR=\"$NEW/tmp\"|" /usr/sbin/livecd-mkinitrd
 
if [ $UP_installed ]; then
    depmod -a ${KERNEL_VERSION}
    /usr/sbin/livecd-mkinitrd --fstab=$NEW/etc/fstab \
                    $NEW/boot/initrd-${KERNEL_VERSION}.img ${KERNEL_VERSION}
    if [ ! -e $NEW/boot/initrd-${KERNEL_VERSION}.img ]; then
        echo "ERROR: Failed to create $NEW/boot/initrd-${KERNEL_VERSION}.img"
        exit_now 1
    fi
fi
if [ $SMP_installed ]; then
    depmod -a ${KERNEL_VERSION}smp
    /usr/sbin/livecd-mkinitrd --fstab=$NEW/etc/fstab \
                    $NEW/boot/initrd-${KERNEL_VERSION}smp.img ${KERNEL_VERSION}smp
    if [ ! -e $NEW/boot/initrd-${KERNEL_VERSION}smp.img ]; then
        echo "ERROR: Failed to create $NEW/boot/initrd-${KERNEL_VERSION}smp.img"
        exit_now 1
    fi
fi
echo "done."; echo
 
 
### remove LiveCD init.d scripts
### -----------------------------------------------------------
for file in $LIVECD_INIT_SCRIPTS; do
    rm -f $NEW/etc/rc.d/init.d/$file
    for n in 0 1 2 3 4 5 6; do
	rm -f $NEW/etc/rc.d/rc${n}.d/*$file
    done
done
 
 
### restore cronjobs
### -----------------------------------------------------------
mv $NEW/etc/cron_backup/sysstat       $NEW/etc/cron.d/ 2>/dev/null
mv $NEW/etc/cron_backup/cfengine      $NEW/etc/cron.d/ 2>/dev/null
mv $NEW/etc/cron_backup/psi-cronjobs  $NEW/etc/cron.d/ 2>/dev/null
mv $NEW/etc/cron_backup/00-makewhatis.cron.weekly $NEW/etc/cron.weekly/00-makewhatis.cron 2>/dev/null
mv $NEW/etc/cron_backup/*             $NEW/etc/cron.daily/ 2>/dev/null
 
 
### prepare chroot to $NEW
### -----------------------------------------------------------
mount --bind /dev $NEW/dev
mount --bind /sys $NEW/sys
mount -t proc proc $NEW/proc
 
 
### turn on kudzu again
### -----------------------------------------------------------
chroot $NEW chkconfig kudzu on
 
 
### turn on check_update again (only at PSI)
### -----------------------------------------------------------
chroot $NEW chkconfig check_update on 2>/dev/null
 
 
### fix some services which were disabled 
### because of diskless NFS client
### -----------------------------------------------------------
if [ -e /$MOUNTDIR/service.on ]; then
    cat /$MOUNTDIR/service.on | while read $serv; do
        chroot $NEW chkconfig $serv on
    done
fi
 
 
### remove some files
### -----------------------------------------------------------
rm -rf $NEW/usr/share/applications/livecd-install-gui.desktop
rm -rf $NEW/usr/share/applications/save-localdata.desktop
 
 
### remove RPMs that can break future updates  
### -----------------------------------------------------------
if [ ! $NORPMREMOVE ]; then
    echo "Remove RPMs that may break future updates ..."
    chroot $NEW rpm -qa 2>/dev/null > /tmp/rpmlist
 
    # Scientific Linux RPMs
    RPMSTOREMOVE="$RPMS_TO_REMOVE $RPMS_TO_REMOVE_SL"
 
    # PSI Scientific Linux RPMs
    if [ -e /etc/sysconfig/psi ]; then
        RPMSTOREMOVE="$RPMS_TO_REMOVE $RPMS_TO_REMOVE_PSI"
    fi
 
    for rpm in $RPMSTOREMOVE; do
        rpms_remove=$( cat /tmp/rpmlist | grep "^$rpm" )
        for rpm_remove in $rpms_remove; do        
            chroot $NEW rpm -e --nodeps $rpm_remove >/dev/null 2>&1
            [ "$?" = "0" ] && echo " removing $rpm_remove"
        done
    done
    echo "done."; echo
fi
 
 
### disable nvidia driver 
### -----------------------------------------------------------
# not in case of a PSI installation
if [ ! -e /etc/sysconfig/psi ]; then
    if [ -e $NEW/etc/X11/xorg.conf.nv_SAVED ]; then
        echo "Remove nvidia driver and correct xorg.conf ..."
        # correct xorg.conf
        sed -i "s/#nv_SAVED //" $NEW/etc/X11/xorg.conf
        sed -i "/.*Driver.*nvidia.*/d" $NEW/etc/X11/xorg.conf
        # disable nvidia libs (if not yet done by rpm -e)
        LIB=lib
        [ $( arch ) = "x86_64" ] && LIB=lib64
        mv -f $NEW/usr/X11R6/$LIB/modules/extensions/xxx.libGLcore.a.saved_by_nvidia \
              $NEW/usr/X11R6/$LIB/modules/extensions/libGLcore.a 2>/dev/null
        mv -f $NEW/usr/X11R6/$LIB/modules/extensions/xxx.libglx.a.saved_by_nvidia \
              $NEW/usr/X11R6/$LIB/modules/extensions/libglx.a 2>/dev/null
        rm -f $NEW/usr/X11R6/$LIB/modules/extensions/libglx.so
        rm -f $NEW/usr/X11R6/$LIB/libGL.so*
        rm -f $NEW/usr/$LIB/libGLcore.so
        echo "done."; echo
    fi
fi
 
 
### umount /dev /sys /proc from chroot
### -----------------------------------------------------------
umount $NEW/dev
umount $NEW/sys
umount $NEW/proc
 
 
### install grub for the 2. time, if it failed before 
### (happens on xfs filesystem), to be sure run it twice.
### -----------------------------------------------------------
if [ ! $NOGRUB ] && [ $GRUB_FAILED ]; then
 
    echo "Run grub-install once more ... "
 
    [ ! $FLOPPY ] && NO_FLOPPY_OPT="--no-floppy"
 
    # 1. run grub-install, before re-mount partition (quite)
    [ $MOUNTED = "0" ] && umount $NEW && mount $INSTALL_PART $NEW
    grub-install $NO_FLOPPY_OPT --root-directory=$NEW $MBR_DEV >/dev/null 2>&1
 
    # 2. run grub-install, before re-mount partition (verbose)
    [ $MOUNTED = "0" ] && umount $NEW && mount $INSTALL_PART $NEW
    grub-install $NO_FLOPPY_OPT --root-directory=$NEW $MBR_DEV
 
    if [ "$?" != "0" ]; then
	echo "grub-install failed again."
	echo "You can try to run grub-install manually as root with:"
	echo
	echo " mount $INSTALL_PART $NEW"
	echo " grub-install $NO_FLOPPY_OPT --root-directory=$NEW $MBR_DEV"
	echo
	exit_now 1
    fi
 
    echo "done."; echo
 
fi
 
 
### umount $INSTALL_PART
### -----------------------------------------------------------
UMOUNT_LIST=`df -l | grep "$NEW" | sed -e 's/  */ /g' | cut -d" " -f6 | sort -r`
umount $UMOUNT_LIST
 
 
### print summary
### -----------------------------------------------------------
echo                     "--------------------------------------------------------------"
echo                     "  LiveCD installed on partition $INSTALL_PART"
[ "$SWAP_PART" ] && echo "  Partition(s) $SWAP_PART will be used as swap partition(s)"
echo
[ ! $NOGRUB ]    && echo "  GRUB installed in Master Boot Record (MBR) of $MBR_DEV"
[ ! $NOGRUB ]    && echo "  MBR saved as $MBR_FILENAME on $INSTALL_PART and in /tmp"
[ ! $NOGRUB ]    && echo "  If you have to restore MBR, execute under Linux:"
[ ! $NOGRUB ]    && echo "  # dd if=$MBR_FILENAME of=$MBR_DEV bs=512 count=1"
echo 
[ $WIN_PART ]    && echo "  Entry created in grub.conf for Windows partition $WIN_PART"
echo                     "--------------------------------------------------------------"
echo                     "End of $SCRIPTNAME"
echo
 
 
### print (warn) message when using xfs and kernel has xfs.ko not included 
### 
 
rpm -ql kernel 2>/dev/null | grep -q \/xfs.ko
if [ "$?" != "0" ]; then
 
    if [ "$FS_TYPE" = "xfs" ]; then
	echo "--------------------------------------------------------------"
	echo "IMPORTANT NOTE:"
	echo
	echo "Formating the rootfile system with xfs can causes problems"
	echo "after a regular kernel update."
	echo "Please run the following command after each kernel update" 
	echo "in order to correctly build the initial ram disk:"
	echo
	echo "# new-kernel-pkg --package kernel --mkinitrd --depmod \\"
	echo "                 --install 2.6.18-128.1.14.el5"
	echo
	echo "(replace 2.6.18-128.1.14.el5 with the version number of the"
	echo "updated kernel)"
	echo "--------------------------------------------------------------"
	echo
    fi
fi

Rev 236	Rev 242
1	`#!/bin/bash`	1	`#!/bin/bash`
2	`#`	2	`#`
3	`###############################################################`	3	`###############################################################`
4	`#`	4	`#`
5	`# Installes the LiveCD on local hard disk`	5	`# Installes the LiveCD on local hard disk`
6	`#`	6	`#`
7	`# Boot LiveCD and run this script as root`	7	`# Boot LiveCD and run this script as root`
8	`#`	8	`#`
9	`# Urs Beyerle`	9	`# Urs Beyerle`
10	`# Brent L. Bates`	10	`# Brent L. Bates`
11	`#`	11	`#`
12	`###############################################################`	12	`###############################################################`
13		13
14		14
15	`###############################################################`	15	`###############################################################`
16	`# Definitions`	16	`# Definitions`
17	`###############################################################`	17	`###############################################################`
18		18
19	`# set PATH`	19	`# set PATH`
20	`PATH="/usr/bin:/usr/sbin:/bin:/sbin:/usr/X11R6/bin"`	20	`PATH="/usr/bin:/usr/sbin:/bin:/sbin:/usr/X11R6/bin"`
21		21
22	`# RPMs that are no longer needed and may break future udpates`	22	`# RPMs that are no longer needed and may break future udpates`
23	`RPMS_TO_REMOVE="kernel-module-squashfs \`	23	`RPMS_TO_REMOVE="kernel-module-squashfs \`
24	`kernel-module-unionfs \`	24	`kernel-module-unionfs \`
25	`kernel-module-aufs \`	25	`kernel-module-aufs \`
26	`unionfs-.* \`	26	`unionfs-.* \`
27	`aufs-.* \`	27	`aufs-.* \`
28	`squashfs-.*"`	28	`squashfs-.*"`
29		29
30	`# RPMs that can break future Scientific Linux updates`	30	`# RPMs that can break future Scientific Linux updates`
31	`# because there are not part of Scientific Linux`	31	`# because there are not part of Scientific Linux`
32	`RPMS_TO_REMOVE_SL=""`	32	`RPMS_TO_REMOVE_SL=""`
33		33
34	`# RPMs that can break future PSI SL updates`	34	`# RPMs that can break future PSI SL updates`
35	`# because there are not part of PSI Scientific Linux`	35	`# because there are not part of PSI Scientific Linux`
36	`RPMS_TO_REMOVE_PSI=""`	36	`RPMS_TO_REMOVE_PSI=""`
37		37
38	`# files which should be restored from .ori files`	38	`# files which should be restored from .ori files`
39	`FILES_RESTORE="/etc/init.d/netfs \`	39	`FILES_RESTORE="/etc/init.d/netfs \`
40	`/etc/init.d/autofs \`	40	`/etc/init.d/autofs \`
41	`/etc/init.d/halt \`	41	`/etc/init.d/halt \`
42	`/etc/init.d/network`	42	`/etc/init.d/network`
43	`/etc/init.d/functions \`	43	`/etc/init.d/functions \`
44	`/etc/rc.d/rc.sysinit \`	44	`/etc/rc.d/rc.sysinit \`
45	`/etc/sysconfig/afs \`	45	`/etc/sysconfig/afs \`
46	`/etc/motd \`	46	`/etc/motd \`
47	`/etc/redhat-release \`	47	`/etc/redhat-release \`
48	`/etc/rc.d/rc.local"`	48	`/etc/rc.d/rc.local"`
49		49
50	`# LiveCD init scripts will be removed`	50	`# LiveCD init scripts will be removed`
51	`LIVECD_INIT_SCRIPTS="runfirst \`	51	`LIVECD_INIT_SCRIPTS="runfirst \`
52	`runveryfirst \`	52	`runveryfirst \`
53	`runlast \`	53	`runlast \`
54	`kudzu-auto \`	54	`kudzu-auto \`
55	`login"`	55	`login"`
56		56
57	`# Main directories which should be not be copied`	57	`# Main directories which should be not be copied`
58	`DIR_NOT_COPY="/proc \`	58	`DIR_NOT_COPY="/proc \`
59	`/dev \`	59	`/dev \`
60	`/livecd \`	60	`/livecd \`
61	`/boot \`	61	`/boot \`
62	`/afs \`	62	`/afs \`
63	`/sys \`	63	`/sys \`
64	`/media \`	64	`/media \`
65	`/misc \`	65	`/misc \`
66	`/mnt \`	66	`/mnt \`
67	`/net \`	67	`/net \`
68	`/initrd"`	68	`/initrd"`
69		69
70	`# Mount point of the new SL system`	70	`# Mount point of the new SL system`
71	`NEW=/mnt/harddisk`	71	`NEW=/mnt/harddisk`
72		72
73	`# Name of the script`	73	`# Name of the script`
74	`SCRIPTNAME=$( basename $0 )`	74	`SCRIPTNAME=$( basename $0 )`
75		75
76	`# dir of mounted /$MOUNTDIR/live`	76	`# dir of mounted /$MOUNTDIR/live`
77	`MOUNTDIR=livecd`	77	`MOUNTDIR=livecd`
78		78
79	`# Default File System Type`	79	`# Default File System Type`
80	`FS_TYPE=ext3`	80	`FS_TYPE=ext3`
81		81
82		82
83	`###############################################################`	83	`###############################################################`
84	`# Functions`	84	`# Functions`
85	`###############################################################`	85	`###############################################################`
86		86
87	`function usage() {`	87	`function usage() {`
88		88
89	`## Usage`	89	`## Usage`
90	`# ----------------------------------------------------------`	90	`# ----------------------------------------------------------`
91		91
92	`cat <<EOF`	92	`cat <<EOF`
93		93
94	`$SCRIPTNAME [OPTIONS] -mbr=[DEVICE] [PARTITION \| MOUNTED FILE SYSTEM]`	94	`$SCRIPTNAME [OPTIONS] -mbr=[DEVICE] [PARTITION \| MOUNTED FILE SYSTEM]`
95		95
96	`Installes LiveCD on PARTITION and the bootloader grub into`	96	`Installes LiveCD on PARTITION and the bootloader grub into`
97	`the Master Boot Record (MBR) of DEVICE. The MBR will be`	97	`the Master Boot Record (MBR) of DEVICE. The MBR will be`
98	`backed up to PARTITION.`	98	`backed up to PARTITION.`
99		99
100	`OPTIONS:`	100	`OPTIONS:`
101		101
102	`-h --help : Print this screen`	102	`-h --help : Print this screen`
103	`-swap=[partition(s)] : Use [partition(s)] as swap ("," or "\|" separated)`	103	`-swap=[partition(s)] : Use [partition(s)] as swap ("," or "\|" separated)`
104	`-win=[partition] : Your active Windows partition. If not given,`	104	`-win=[partition] : Your active Windows partition. If not given,`
105	`$SCRIPTNAME tries to find it`	105	`$SCRIPTNAME tries to find it`
106	`-nogrub : Do not install grub. You have to install`	106	`-nogrub : Do not install grub. You have to install`
107	`manually a bootloader (not recommended)`	107	`manually a bootloader (not recommended)`
108	`-floppy : Needed, if grub should be installed on floppy`	108	`-floppy : Needed, if grub should be installed on floppy`
109	`In this case use -mbr=/dev/fd0 -floppy`	109	`In this case use -mbr=/dev/fd0 -floppy`
110	`-norpmremove : Do not remove RPMs that can break future`	110	`-norpmremove : Do not remove RPMs that can break future`
111	`updates (not recommended)`	111	`updates (not recommended)`
112	`-fstype : File system type (ext3,xfs,etc.), default is $FS_TYPE`	112	`-fstype : File system type (ext3,xfs,etc.), default is $FS_TYPE`
113	`-y : Answer all questions with yes`	113	`-y : Answer all questions with yes`
114		114
115	`Example:`	115	`Example:`
116		116
117	`$SCRIPTNAME -swap=/dev/sda3 -mbr=/dev/sda /dev/sda2`	117	`$SCRIPTNAME -swap=/dev/sda3 -mbr=/dev/sda /dev/sda2`
118		118
119	`Will install LiveCD on /dev/sda2 (= second partition on`	119	`Will install LiveCD on /dev/sda2 (= second partition on`
120	`first SATA disk). All data on /dev/sda2 will be deleted.`	120	`first SATA disk). All data on /dev/sda2 will be deleted.`
121	`/dev/sda3 has to be a Linux Swap partion. GRUB will be`	121	`/dev/sda3 has to be a Linux Swap partion. GRUB will be`
122	`installed in the MBR of /dev/sda (= first SATA disk).`	122	`installed in the MBR of /dev/sda (= first SATA disk).`
123		123
124	`Remarks:`	124	`Remarks:`
125		125
126	`To display your hard disk partitions, user 'fdisk -l'.`	126	`To display your hard disk partitions, user 'fdisk -l'.`
127	`Use fdisk, qtparted or parted to create an empty Linux`	127	`Use fdisk, qtparted or parted to create an empty Linux`
128	`partition.`	128	`partition.`
129		129
130	`EOF`	130	`EOF`
131	`}`	131	`}`
132		132
133		133
134	`function exit_now() {`	134	`function exit_now() {`
135		135
136	`local exitcode=$1`	136	`local exitcode=$1`
137	`umount $INSTALL_PART 2>/dev/null`	137	`umount $INSTALL_PART 2>/dev/null`
138	`exit $exitcode`	138	`exit $exitcode`
139	`}`	139	`}`
140		140
141		141
142		142
143	`###############################################################`	143	`###############################################################`
144	`# Main`	144	`# Main`
145	`###############################################################`	145	`###############################################################`
146		146
147	`### are we root?`	147	`### are we root?`
148	`### -----------------------------------------------------------`	148	`### -----------------------------------------------------------`
149	`if [ "$( whoami )" != "root" ]; then`	149	`if [ "$( whoami )" != "root" ]; then`
150	`echo; echo "Please run this script as root: 'su - -c $SCRIPTNAME'"; echo`	150	`echo; echo "Please run this script as root: 'su - -c $SCRIPTNAME'"; echo`
151	`exit_now 1`	151	`exit_now 1`
152	`fi`	152	`fi`
153		153
154		154
155	`### read options from command-line`	155	`### read options from command-line`
156	`### -----------------------------------------------------------`	156	`### -----------------------------------------------------------`
157	`while [ $# -gt 0 ]; do`	157	`while [ $# -gt 0 ]; do`
158		158
159	`case "$1" in`	159	`case "$1" in`
160	`-h)`	160	`-h)`
161	`usage; exit_now;;`	161	`usage; exit_now;;`
162		162
163	`--help)`	163	`--help)`
164	`usage; exit_now;;`	164	`usage; exit_now;;`
165		165
166	`-swap*)`	166	`-swap*)`
167	`if echo $1 \| grep -q '=' ; then`	167	`if echo $1 \| grep -q '=' ; then`
168	`SWAP_PART=$( echo $1 \| sed 's/^-swap=//' )`	168	`SWAP_PART=$( echo $1 \| sed 's/^-swap=//' )`
169	`else`	169	`else`
170	`shift`	170	`shift`
171	`SWAP_PART=$1`	171	`SWAP_PART=$1`
172	`fi`	172	`fi`
173	`;;`	173	`;;`
174		174
175	`-mbr*)`	175	`-mbr*)`
176	`if echo $1 \| grep -q '=' ; then`	176	`if echo $1 \| grep -q '=' ; then`
177	`MBR_DEV=$( echo $1 \| sed 's/^-mbr=//' )`	177	`MBR_DEV=$( echo $1 \| sed 's/^-mbr=//' )`
178	`else`	178	`else`
179	`shift`	179	`shift`
180	`MBR_DEV=$1`	180	`MBR_DEV=$1`
181	`fi`	181	`fi`
182	`MBR_DEV=$( echo "$MBR_DEV" \| sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )`	182	`MBR_DEV=$( echo "$MBR_DEV" \| sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )`
183	`;;`	183	`;;`
184		184
185	`-win*)`	185	`-win*)`
186	`if echo $1 \| grep -q '=' ; then`	186	`if echo $1 \| grep -q '=' ; then`
187	`WIN_PART=$( echo $1 \| sed 's/^-win=//' )`	187	`WIN_PART=$( echo $1 \| sed 's/^-win=//' )`
188	`else`	188	`else`
189	`shift`	189	`shift`
190	`WIN_PART=$1`	190	`WIN_PART=$1`
191	`fi`	191	`fi`
192	`;;`	192	`;;`
193		193
194	`-nogrub)`	194	`-nogrub)`
195	`NOGRUB=$1;;`	195	`NOGRUB=$1;;`
196		196
197	`-norpmremove)`	197	`-norpmremove)`
198	`NORPMREMOVE=$1;;`	198	`NORPMREMOVE=$1;;`
199		199
200	`-floppy)`	200	`-floppy)`
201	`FLOPPY=$1;;`	201	`FLOPPY=$1;;`
202		202
203	`-fstype)`	203	`-fstype)`
204	`shift`	204	`shift`
205	`FS_TYPE=$1;;`	205	`FS_TYPE=$1;;`
206		206
207	`-y)`	207	`-y)`
208	`YES=$1;;`	208	`YES=$1;;`
209		209
210	`*)`	210	`*)`
211	`INSTALL_PART=$1;;`	211	`INSTALL_PART=$1;;`
212	`esac`	212	`esac`
213		213
214	`shift`	214	`shift`
215		215
216	`done`	216	`done`
217	`echo`	217	`echo`
218		218
219		219
220	`### display fdisk -l`	220	`### display fdisk -l`
221	`### -----------------------------------------------------------`	221	`### -----------------------------------------------------------`
222	`echo "Output of 'fdisk -l' ..."`	222	`echo "Output of 'fdisk -l' ..."`
223	`fdisk -l 2>/dev/null`	223	`fdisk -l 2>/dev/null`
224	`echo`	224	`echo`
225		225
226		226
227	`### test if $INSTALL_PART is defined`	227	`### test if $INSTALL_PART is defined`
228	`### -----------------------------------------------------------`	228	`### -----------------------------------------------------------`
229	`if [ ! $INSTALL_PART ]; then`	229	`if [ ! $INSTALL_PART ]; then`
230	`echo "No partition defined for installation."`	230	`echo "No partition defined for installation."`
231	`echo "Please see '$SCRIPTNAME -h'."; echo`	231	`echo "Please see '$SCRIPTNAME -h'."; echo`
232	`exit_now 1`	232	`exit_now 1`
233	`fi`	233	`fi`
234		234
235		235
236	`### test if MBR_DEV is given`	236	`### test if MBR_DEV is given`
237	`### -----------------------------------------------------------`	237	`### -----------------------------------------------------------`
238	`if [ ! $NOGRUB ]; then`	238	`if [ ! $NOGRUB ]; then`
239	`if [ ! $MBR_DEV ]; then`	239	`if [ ! $MBR_DEV ]; then`
240	`echo "No MBR device defined."`	240	`echo "No MBR device defined."`
241	`echo "Please see '$SCRIPTNAME -h'."`	241	`echo "Please see '$SCRIPTNAME -h'."`
242	`echo`	242	`echo`
243	`exit_now 1`	243	`exit_now 1`
244	`fi`	244	`fi`
245	`fi`	245	`fi`
246		246
247		247
248	`### test if $INSTALL_PART is mounted`	248	`### test if $INSTALL_PART is mounted`
249	`### -----------------------------------------------------------`	249	`### -----------------------------------------------------------`
250	`df -T -l \| sed -e 's/ */ /g' \| grep -q "${INSTALL_PART}"`	250	`df -T -l \| sed -e 's/ */ /g' \| grep -q "${INSTALL_PART}"`
251		251
252	`if [ "$?" = "0" ]; then`	252	`if [ "$?" = "0" ]; then`
253	`### This is a mounted partition`	253	`### This is a mounted partition`
254	`### -----------------------------------------------------------`	254	`### -----------------------------------------------------------`
255	`MOUNTED=1`	255	`MOUNTED=1`
256		256
257	`df -T -l \| sed -e 's/ */ /g' \| cut -d" " -f7 \| grep -q "^${INSTALL_PART}$"`	257	`df -T -l \| sed -e 's/ */ /g' \| cut -d" " -f7 \| grep -q "^${INSTALL_PART}$"`
258	`if [ "$?" = "0" ]; then`	258	`if [ "$?" = "0" ]; then`
259		259
260	`### Was given the mount point`	260	`### Was given the mount point`
261	`### -----------------------------------------------------------`	261	`### -----------------------------------------------------------`
262	`NEW=${INSTALL_PART}`	262	`NEW=${INSTALL_PART}`
263	INSTALL_PART=`df -T -l \| grep "${INSTALL_PART}$" \| cut -d" " -f1`	263	INSTALL_PART=`df -T -l \| grep "${INSTALL_PART}$" \| cut -d" " -f1`
264	`else`	264	`else`
265		265
266	`### Was given the mount partition`	266	`### Was given the mount partition`
267	`### -----------------------------------------------------------`	267	`### -----------------------------------------------------------`
268	NEW=`df -T -l \| grep "^${INSTALL_PART}" \| sed -e 's/ */ /g' \| cut -d" " -f7`	268	NEW=`df -T -l \| grep "^${INSTALL_PART}" \| sed -e 's/ */ /g' \| cut -d" " -f7`
269	`fi`	269	`fi`
270	FS_TYPE=`df -T -l \| sed -e 's/ */ /g' \| grep "^${INSTALL_PART}" \| cut -d" " -f2`	270	FS_TYPE=`df -T -l \| sed -e 's/ */ /g' \| grep "^${INSTALL_PART}" \| cut -d" " -f2`
271		271
272	`### Get boot defice information`	272	`### Get boot defice information`
273	`### Check for separate mounted boot partition`	273	`### Check for separate mounted boot partition`
274	`### -----------------------------------------------------------`	274	`### -----------------------------------------------------------`
275	INSTALL_DEV=`df -T -l \| sed -e 's/ */ /g' \| grep "boot$" \| cut -d" " -f1`	275	INSTALL_DEV=`df -T -l \| sed -e 's/ */ /g' \| grep "boot$" \| cut -d" " -f1`
276	`if [ "$?" = "0" ]; then`	276	`if [ "$?" = "0" ]; then`
277	`### Separate boot partition`	277	`### Separate boot partition`
278	`### -----------------------------------------------------------`	278	`### -----------------------------------------------------------`
279	`INSTALL_BOOT_DIR=""`	279	`INSTALL_BOOT_DIR=""`
280	`else`	280	`else`
281	`### Install and boot all one partition`	281	`### Install and boot all one partition`
282	`### -----------------------------------------------------------`	282	`### -----------------------------------------------------------`
283	`INSTALL_DEV=${INSTALL_PART}`	283	`INSTALL_DEV=${INSTALL_PART}`
284	`INSTALL_BOOT_DIR="/boot"`	284	`INSTALL_BOOT_DIR="/boot"`
285	`fi`	285	`fi`
286		286
287	`### Is the boot device a RAID device`	287	`### Is the boot device a RAID device`
288	`### -----------------------------------------------------------`	288	`### -----------------------------------------------------------`
289	`mdadm -D $INSTALL_DEV 2>/dev/null \| grep -q -i Version`	289	`mdadm -D $INSTALL_DEV 2>/dev/null \| grep -q -i Version`
290	`if [ "$?" = "0" ]; then`	290	`if [ "$?" = "0" ]; then`
291	`### Boot device is RAID`	291	`### Boot device is RAID`
292	`### -----------------------------------------------------------`	292	`### -----------------------------------------------------------`
293	BOOT_DRIVE=`mdadm -D $INSTALL_DEV \| grep -v ':$' \| grep "/dev/" \| sed -e 's/ */ /g' \| cut -d" " -f8 \|head -1`	293	BOOT_DRIVE=`mdadm -D $INSTALL_DEV \| grep -v ':$' \| grep "/dev/" \| sed -e 's/ */ /g' \| cut -d" " -f8 \|head -1`
294	`INSTALL_PART_NR=$( echo "$BOOT_DRIVE" \| sed -e 's%./[sh]d[a-z]\([0-9]\)$%\1%' )`	294	`INSTALL_PART_NR=$( echo "$BOOT_DRIVE" \| sed -e 's%./[sh]d[a-z]\([0-9]\)$%\1%' )`
295	`BOOT_DRIVE=$( echo "$BOOT_DRIVE" \| sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )`	295	`BOOT_DRIVE=$( echo "$BOOT_DRIVE" \| sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )`
296	`else`	296	`else`
297	`### Boot device not RAID`	297	`### Boot device not RAID`
298	`### -----------------------------------------------------------`	298	`### -----------------------------------------------------------`
299	`INSTALL_PART_NR=$( echo "$INSTALL_DEV" \| sed -e 's%./[sh]d[a-z]\([0-9]\)$%\1%' )`	299	`INSTALL_PART_NR=$( echo "$INSTALL_DEV" \| sed -e 's%./[sh]d[a-z]\([0-9]\)$%\1%' )`
300	`INSTALL_DEV=$( echo "$INSTALL_DEV" \| sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )`	300	`INSTALL_DEV=$( echo "$INSTALL_DEV" \| sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )`
301	`BOOT_DRIVE=$INSTALL_DEV`	301	`BOOT_DRIVE=$INSTALL_DEV`
302	`fi`	302	`fi`
303	`else`	303	`else`
304	`### Partition is NOT mounted`	304	`### Partition is NOT mounted`
305	`### -----------------------------------------------------------`	305	`### -----------------------------------------------------------`
306	`MOUNTED=0`	306	`MOUNTED=0`
307		307
308	`### test if $INSTALL_PART exists`	308	`### test if $INSTALL_PART exists`
309	`### -----------------------------------------------------------`	309	`### -----------------------------------------------------------`
310	`fdisk -l 2>/dev/null \| cut -d" " -f1 \| grep -q "^${INSTALL_PART}$"`	310	`fdisk -l 2>/dev/null \| cut -d" " -f1 \| grep -q "^${INSTALL_PART}$"`
311	`if [ "$?" != "0" ]; then`	311	`if [ "$?" != "0" ]; then`
312	`echo "Partition $INSTALL_PART not found! See 'fdisk -l'."`	312	`echo "Partition $INSTALL_PART not found! See 'fdisk -l'."`
313	`echo "Or you have to reboot first to make the partition table active."`	313	`echo "Or you have to reboot first to make the partition table active."`
314	`echo`	314	`echo`
315	`exit_now 1`	315	`exit_now 1`
316	`fi`	316	`fi`
317		317
318		318
319	`### test if $INSTALL_PART is a Linux partition`	319	`### test if $INSTALL_PART is a Linux partition`
320	`### -----------------------------------------------------------`	320	`### -----------------------------------------------------------`
321	`fdisk -l 2>/dev/null \| grep "Linux$" \| cut -d" " -f1 \| grep -q "^${INSTALL_PART}$"`	321	`fdisk -l 2>/dev/null \| grep "Linux$" \| cut -d" " -f1 \| grep -q "^${INSTALL_PART}$"`
322	`if [ "$?" != "0" ]; then`	322	`if [ "$?" != "0" ]; then`
323	`echo "Partition $INSTALL_PART is not a Linux partition! (see 'fdisk -l')."`	323	`echo "Partition $INSTALL_PART is not a Linux partition! (see 'fdisk -l')."`
324	`echo "Use fdisk and/or qtparted to create a Linux partition!"`	324	`echo "Use fdisk and/or qtparted to create a Linux partition!"`
325	`echo "You have to reboot first to make the partition table active."`	325	`echo "You have to reboot first to make the partition table active."`
326	`echo`	326	`echo`
327	`exit_now 1`	327	`exit_now 1`
328	`fi`	328	`fi`
329		329
330	`### set $INSTALL_DEV (eg. /dev/sda)`	330	`### set $INSTALL_DEV (eg. /dev/sda)`
331	`### -----------------------------------------------------------`	331	`### -----------------------------------------------------------`
332	`INSTALL_DEV=$( echo "$INSTALL_PART" \| sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )`	332	`INSTALL_DEV=$( echo "$INSTALL_PART" \| sed -e 's%\([sh]d[a-z]\)[0-9]*$%\1%' )`
333	`BOOT_DRIVE=$INSTALL_DEV`	333	`BOOT_DRIVE=$INSTALL_DEV`
334	`INSTALL_PART_NR=$( echo "$INSTALL_PART" \| sed -e 's%./[sh]d[a-z]\([0-9]\)$%\1%' )`	334	`INSTALL_PART_NR=$( echo "$INSTALL_PART" \| sed -e 's%./[sh]d[a-z]\([0-9]\)$%\1%' )`
335	`INSTALL_BOOT_DIR="/boot"`	335	`INSTALL_BOOT_DIR="/boot"`
336	`fi`	336	`fi`
337		337
338		338
339	`### test if $SWAP_PART exists and is a Linux Swap partition`	339	`### test if $SWAP_PART exists and is a Linux Swap partition`
340	`### -----------------------------------------------------------`	340	`### -----------------------------------------------------------`
341	`if [ "$SWAP_PART" ]; then`	341	`if [ "$SWAP_PART" ]; then`
342	SWAP_PART=`echo ${SWAP_PART} \|tr '[,\|]' ' '`	342	SWAP_PART=`echo ${SWAP_PART} \|tr '[,\|]' ' '`
343	`for SWAP_PARTITION in $SWAP_PART ; do`	343	`for SWAP_PARTITION in $SWAP_PART ; do`
344	`fdisk -l 2>/dev/null \| cut -d" " -f1 \| grep -q "^${SWAP_PARTITION}$"`	344	`fdisk -l 2>/dev/null \| cut -d" " -f1 \| grep -q "^${SWAP_PARTITION}$"`
345	`if [ "$?" != "0" ]; then`	345	`if [ "$?" != "0" ]; then`
346	`echo "Swap partition $SWAP_PARTITION not found! (see 'fdisk -l')."`	346	`echo "Swap partition $SWAP_PARTITION not found! (see 'fdisk -l')."`
347	`echo "Or you have to reboot first to make the partition table active."`	347	`echo "Or you have to reboot first to make the partition table active."`
348	`echo`	348	`echo`
349	`exit_now 1`	349	`exit_now 1`
350	`fi`	350	`fi`
351	`fdisk -l 2>/dev/null \| grep "Linux swap" \| cut -d" " -f1 \| grep -q "^${SWAP_PARTITION}$"`	351	`fdisk -l 2>/dev/null \| grep "Linux swap" \| cut -d" " -f1 \| grep -q "^${SWAP_PARTITION}$"`
352	`if [ "$?" != "0" ]; then`	352	`if [ "$?" != "0" ]; then`
353	`echo "Partition(s) $SWAP_PARTITION is/are not a Linux swap partition! (see 'fdisk -l')."`	353	`echo "Partition(s) $SWAP_PARTITION is/are not a Linux swap partition! (see 'fdisk -l')."`
354	`echo "Use fdisk and/or qtparted to create a Linux Swap partition !"`	354	`echo "Use fdisk and/or qtparted to create a Linux Swap partition !"`
355	`echo "You have to reboot first to make the partition table active."`	355	`echo "You have to reboot first to make the partition table active."`
356	`echo`	356	`echo`
357	`exit_now 1`	357	`exit_now 1`
358	`fi`	358	`fi`
359	`done`	359	`done`
360	`fi`	360	`fi`
361		361
362		362
363	`### print warning`	363	`### print warning`
364	`### -----------------------------------------------------------`	364	`### -----------------------------------------------------------`
365	`echo "------------------------------------------------------------"`	365	`echo "------------------------------------------------------------"`
366	`echo " LiveCD will be installed on partition $INSTALL_PART"`	366	`echo " LiveCD will be installed on partition $INSTALL_PART"`
367	`[ "$SWAP_PART" ] && echo " Partition(s) $SWAP_PART will be used as swap partition(s)."`	367	`[ "$SWAP_PART" ] && echo " Partition(s) $SWAP_PART will be used as swap partition(s)."`
368	`[ ! $NOGRUB ] && echo " GRUB will be installed in Master Boot Record of $MBR_DEV"`	368	`[ ! $NOGRUB ] && echo " GRUB will be installed in Master Boot Record of $MBR_DEV"`
369	`echo " !! All data on $INSTALL_PART will be lost !!"`	369	`echo " !! All data on $INSTALL_PART will be lost !!"`
370	`echo "------------------------------------------------------------"`	370	`echo "------------------------------------------------------------"`
371	`echo`	371	`echo`
372		372
373		373
374	`### continue?`	374	`### continue?`
375	`### -----------------------------------------------------------`	375	`### -----------------------------------------------------------`
376	`if [ ! $YES ]; then`	376	`if [ ! $YES ]; then`
377	`echo -n "Continue (y/N)? "`	377	`echo -n "Continue (y/N)? "`
378	`read key`	378	`read key`
379	`echo`	379	`echo`
380	`[ "$key" != "y" ] && exit_now 0`	380	`[ "$key" != "y" ] && exit_now 0`
381	`fi`	381	`fi`
382		382
383		383
384	`### format $SWAP_PART (don't format swap, if already formated)`	384	`### format $SWAP_PART (don't format swap, if already formated)`
385	`### -----------------------------------------------------------`	385	`### -----------------------------------------------------------`
386	`if [ "$SWAP_PART" ]; then`	386	`if [ "$SWAP_PART" ]; then`
387	`echo "Make swap on $SWAP_PART ..."`	387	`echo "Make swap on $SWAP_PART ..."`
388	`swapoff -a >/dev/null 2>&1`	388	`swapoff -a >/dev/null 2>&1`
389	`swapon -p 1 $SWAP_PART 2>/dev/null`	389	`swapon -p 1 $SWAP_PART 2>/dev/null`
390	`if [ "$?" != "0" ]; then`	390	`if [ "$?" != "0" ]; then`
391	`for SWAP_PARTITION in $SWAP_PART; do`	391	`for SWAP_PARTITION in $SWAP_PART; do`
392	`echo "Format $SWAP_PARTITION as swap."`	392	`echo "Format $SWAP_PARTITION as swap."`
393	`mkswap $SWAP_PARTITION`	393	`mkswap $SWAP_PARTITION`
394	`done`	394	`done`
395	`fi`	395	`fi`
396	`echo`	396	`echo`
397	`fi`	397	`fi`
398		398
399		399
400	`if [ $MOUNTED = "0" ]; then`	400	`if [ $MOUNTED = "0" ]; then`
401	`### format $INSTALL_PART`	401	`### format $INSTALL_PART`
402	`### -----------------------------------------------------------`	402	`### -----------------------------------------------------------`
403		403
404	`# define force option for mkfs command`	404	`# define force option for mkfs command`
405	`FORCE=""`	405	`FORCE=""`
406	`[ "$FS_TYPE" = "xfs" ] && FORCE="-f"`	406	`[ "$FS_TYPE" = "xfs" ] && FORCE="-f"`
407		407
408	`echo -n "Format $INSTALL_PART as $FS_TYPE, please wait ... "`	408	`echo -n "Format $INSTALL_PART as $FS_TYPE, please wait ... "`
409	`mkfs.$FS_TYPE $FORCE -q $INSTALL_PART \|\| exit_now 1`	409	`mkfs.$FS_TYPE $FORCE -q $INSTALL_PART \|\| exit_now 1`
410	`echo "done."; echo`	410	`echo "done."; echo`
411		411
412	`### mount $INSTALL_PART`	412	`### mount $INSTALL_PART`
413	`### -----------------------------------------------------------`	413	`### -----------------------------------------------------------`
414	`echo -n "Try to mount $INSTALL_PART to $NEW ... "`	414	`echo -n "Try to mount $INSTALL_PART to $NEW ... "`
415	`mkdir -p $NEW`	415	`mkdir -p $NEW`
416	`mount $INSTALL_PART $NEW \|\| exit_now 1`	416	`mount $INSTALL_PART $NEW \|\| exit_now 1`
417	`echo "done."; echo`	417	`echo "done."; echo`
418	`fi`	418	`fi`
419		419
420		420
421	`### copy root dirs`	421	`### copy root dirs`
422	`### -----------------------------------------------------------`	422	`### -----------------------------------------------------------`
423	`echo "Copy Live System to $INSTALL_PART ..."`	423	`echo "Copy Live System to $INSTALL_PART ..."`
424	`root_dirs=$( ls / )`	424	`root_dirs=$( ls / )`
425	`for dir in $root_dirs; do`	425	`for dir in $root_dirs; do`
426	`# check if dir is not in $DIR_NOT_COPY`	426	`# check if dir is not in $DIR_NOT_COPY`
427	`do_not_copy=""`	427	`do_not_copy=""`
428	`for not_dir in $DIR_NOT_COPY; do`	428	`for not_dir in $DIR_NOT_COPY; do`
429	`if [ "$not_dir" = "/$dir" ]; then`	429	`if [ "$not_dir" = "/$dir" ]; then`
430	`do_not_copy="yes"`	430	`do_not_copy="yes"`
431	`break`	431	`break`
432	`fi`	432	`fi`
433	`done`	433	`done`
434	`# do not copy links`	434	`# do not copy links`
435	`[ -L /$dir ] && do_not_copy="yes"`	435	`[ -L /$dir ] && do_not_copy="yes"`
436		436
437	`fail=""`	437	`fail=""`
438	`if [ ! $do_not_copy ]; then`	438	`if [ ! $do_not_copy ]; then`
439	`echo -n " * Copy /$dir ... "`	439	`echo -n " * Copy /$dir ... "`
440	`# first delete $dir on hardisk`	440	`# first delete $dir on hardisk`
441	`rm -rf $NEW/$dir`	441	`rm -rf $NEW/$dir`
442	`cp -a -f /$dir $NEW \|\| fail=true`	442	`cp -a -f /$dir $NEW \|\| fail=true`
443	`echo "done."`	443	`echo "done."`
444	`fi`	444	`fi`
445	`fail=""`	445	`fail=""`
446	`done`	446	`done`
447	`echo`	447	`echo`
448	`if [ $fail ]; then`	448	`if [ $fail ]; then`
449	`echo "ERROR: Not everything was copied to $INSTALL_PART"`	449	`echo "ERROR: Not everything was copied to $INSTALL_PART"`
450	`exit_now 1`	450	`exit_now 1`
451	`fi`	451	`fi`
452		452
453		453
454	`### move /usr/opt back to /opt`	454	`### move /usr/opt back to /opt`
455	`### -----------------------------------------------------------`	455	`### -----------------------------------------------------------`
456	`if [ -d $NEW/usr/opt ]; then`	456	`if [ -d $NEW/usr/opt ]; then`
457	`echo -n "Move /opt back ... "`	457	`echo -n "Move /opt back ... "`
458	`mv $NEW/usr/opt $NEW/`	458	`mv $NEW/usr/opt $NEW/`
459	`echo "done."; echo`	459	`echo "done."; echo`
460	`fi`	460	`fi`
461		461
462		462
463	`### create dirs which were not copied`	463	`### create dirs which were not copied`
464	`### -----------------------------------------------------------`	464	`### -----------------------------------------------------------`
465	`for dir in $DIR_NOT_COPY; do`	465	`for dir in $DIR_NOT_COPY; do`
466	`if [ ! -d $NEW$dir ]; then`	466	`if [ ! -d $NEW$dir ]; then`
467	`mkdir $NEW$dir`	467	`mkdir $NEW$dir`
468	`fi`	468	`fi`
469	`done`	469	`done`
470	`# we do not need this directory`	470	`# we do not need this directory`
471	`rmdir $NEW/livecd`	471	`rmdir $NEW/livecd`
472	`# if not yet existing, create`	472	`# if not yet existing, create`
473	`mkdir -p $NEW/srv`	473	`mkdir -p $NEW/srv`
474	`mkdir -p $NEW/selinux`	474	`mkdir -p $NEW/selinux`
475		475
476		476
477	`### copy back original files`	477	`### copy back original files`
478	`### -----------------------------------------------------------`	478	`### -----------------------------------------------------------`
479	`echo -n "Restore original files ... "`	479	`echo -n "Restore original files ... "`
480	`for file in $FILES_RESTORE; do`	480	`for file in $FILES_RESTORE; do`
481	`[ -r $NEW${file}.ori ] && mv -f $NEW${file}.ori $NEW${file}`	481	`[ -r $NEW${file}.ori ] && mv -f $NEW${file}.ori $NEW${file}`
482	`done`	482	`done`
483	`echo "done."; echo`	483	`echo "done."; echo`
484		484
485		485
486	`### define kernel version`	486	`### define kernel version`
487	`### -----------------------------------------------------------`	487	`### -----------------------------------------------------------`
488	`rpm --quiet -q kernel && UP_installed=true`	488	`rpm --quiet -q kernel && UP_installed=true`
489	`rpm --quiet -q kernel-smp && SMP_installed=true`	489	`rpm --quiet -q kernel-smp && SMP_installed=true`
490	`[ $UP_installed ] && KERNEL_VERSION=$( rpm -q --qf "%{V}-%{R}" kernel 2>/dev/null )`	490	`[ $UP_installed ] && KERNEL_VERSION=$( rpm -q --qf "%{V}-%{R}" kernel 2>/dev/null )`
491	`[ $SMP_installed ] && KERNEL_VERSION=$( rpm -q --qf "%{V}-%{R}" kernel-smp 2>/dev/null )`	491	`[ $SMP_installed ] && KERNEL_VERSION=$( rpm -q --qf "%{V}-%{R}" kernel-smp 2>/dev/null )`
492	`if [ ! $KERNEL_VERSION ]; then`	492	`if [ ! $KERNEL_VERSION ]; then`
493	`echo "ERROR: Kernel version could not be determined - installation failed"; echo`	493	`echo "ERROR: Kernel version could not be determined - installation failed"; echo`
494	`exit_now 1`	494	`exit_now 1`
495	`fi`	495	`fi`
496		496
497		497
498		498
499	`if [ ! $NOGRUB ]; then`	499	`if [ ! $NOGRUB ]; then`
500		500

Subversion Repositories livecd

(root)/trunk/customize/livecd-install @ 243 – Rev 236 → 242