WebSVN – livecd – Diff – /trunk/customize/kudzu-auto


#!/bin/bash
#
# Noninteractive HW detection and configuration
# in particular configure network devices
#
# Urs Beyerle, PSI
#
 
### -----------------------------------------------------------
### definitions
### -----------------------------------------------------------
 
# dir of mounted /$MOUNTDIR/live
MOUNTDIR=livecd
 
# source functions
. /$MOUNTDIR/live/liblinuxlive
. /etc/init.d/functions
 
 
### -----------------------------------------------------------
### Get boot parameters
### -----------------------------------------------------------
 
# do not start network
NONET=$( cmdline_parameter nonet )
 
# static IP
IPADDR=$( cmdline_value ip )
 
# gateway
GATEWAY=$( cmdline_value gw )
 
# netmask
NETMASK=$( cmdline_value netmask )
 
# start WLAN network on boot
WLAN=$( cmdline_parameter wlan )
 
# do not apply any fixes (for debugging)
NOFIX=$( cmdline_parameter nofix )
 
 
 
### -----------------------------------------------------------
### Main
### -----------------------------------------------------------
 
### run kudzu in quiet mode
action $"Hardware auto-detection, please wait... " /usr/sbin/kudzu -q
 
 
### never start on boot the following network devices (wifi0)
if [ ! $NOFIX ]; then
    for iface in wifi0; do
	for file in networking/profiles/default/ifcfg \
	    networking/devices/ifcfg \
	    network-scripts/ifcfg; do
	  if [ -e /etc/sysconfig/${file}-${iface} ]; then
	      sed -i "s/ONBOOT=.*/ONBOOT=no/" /etc/sysconfig/${file}-${iface}
	  fi
	done
    done
fi
 
 
### do not start network devices, if NONET is defined
if [ $NONET ]; then
    # find all network devices (exclude loopback device)
    config_files=$( find /etc/sysconfig -name ifcfg-* 2>/dev/null | grep -v ifcfg-lo )
    for file in $config_files; do
	sed -i "s/ONBOOT=.*/ONBOOT=no/" $file
    done
fi
 
 
### define static IP and gateway, netmask
if [ $IPADDR ]; then    
    if [ ! $GATEWAY ]; then
	# default gatway x.y.z.1
	GATEWAY=$( echo $IPADDR | awk -F"." '{ print $1"."$2"."$3".1" }' )
	if [ ! $NETMASK ]; then
	    NETMASK=255.255.255.0
	fi
    fi
    # create config files for eth0
    for iface in eth0; do
	for file in networking/profiles/default/ifcfg \
	            networking/devices/ifcfg \
	            network-scripts/ifcfg; do
	  sed -i "s/BOOTPROTO=.*/BOOTPROTO=none/" /etc/sysconfig/${file}-${iface}
	  echo "IPADDR=$IPADDR" > /etc/sysconfig/${file}-${iface}
	  echo "NETMASK=$NETMASK" > /etc/sysconfig/${file}-${iface}
	  echo "GATEWAY=$GATEWAY" > /etc/sysconfig/${file}-${iface}
	done
    done
fi
 
 
### activate ipw3945d daemon, if we have Intel IPW3945 WLAN 
lspci | grep -q Intel.*3945ABG
if [ "$?" = "0" ]; then
    chkconfig ipw3945d on 2>/dev/null
    /etc/init.d/ipw3945d start >/dev/null 2>&1 &
fi
 
### activate Atheros WLAN
lspci | grep -q Ethernet.*Atheros
if [ "$?" = "0" ]; then
    # bring ath0 up
    ifconfig ath0 up > /dev/null 2>&1
    # replace wifi0 with ath0
    for file in networking/profiles/default/ifcfg \
	networking/devices/ifcfg \
	network-scripts/ifcfg; do
      if [ -e /etc/sysconfig/${file}-wifi0 ]; then
	  mv /etc/sysconfig/${file}-wifi0 /etc/sysconfig/${file}-ath0
	  sed -i "s/wifi0/ath0/" /etc/sysconfig/${file}-ath0
	  grep -q Wireless /etc/sysconfig/${file}-ath0
	  [ "$?" != "0" ] && echo "TYPE=Wireless" >> /etc/sysconfig/${file}-ath0
      fi
    done
fi
 
 
### do not start WLAN devices on boot
if [ ! $WLAN ]; then
    # find all network devices (exclude loopback device)
    config_files=$( find /etc/sysconfig -name ifcfg-* 2>/dev/null | grep -v ifcfg-lo )
    for file in $config_files; do
	# WLAN device?
	grep -q TYPE=Wireless $file
        if [ "$?" = "0" ]; then
	    sed -i "s/ONBOOT=.*/ONBOOT=no/" $file
	fi
    done
fi
 
 
    
### enable 915resolution on Intel Mobile Display controller
lspci | grep -q Display.*Intel.*Mobile
if [ "$?" = "0" ]; then 
    chkconfig 915resolution on
    /etc/init.d/915resolution start >/dev/null 2>&1 &
fi
    

Rev 81	Rev 83
1	`#!/bin/bash`	1	`#!/bin/bash`
2	`#`	2	`#`
3	`# Noninteractive HW detection and configuration`	3	`# Noninteractive HW detection and configuration`
4	`# in particular configure network devices`	4	`# in particular configure network devices`
5	`#`	5	`#`
6	`# Urs Beyerle, PSI`	6	`# Urs Beyerle, PSI`
7	`#`	7	`#`
8		8
9	`### -----------------------------------------------------------`	9	`### -----------------------------------------------------------`
10	`### definitions`	10	`### definitions`
11	`### -----------------------------------------------------------`	11	`### -----------------------------------------------------------`
12		12
13	`# dir of mounted /$MOUNTDIR/live`	13	`# dir of mounted /$MOUNTDIR/live`
14	`MOUNTDIR=livecd`	14	`MOUNTDIR=livecd`
15		15
16	`# source functions`	16	`# source functions`
17	`. /$MOUNTDIR/live/liblinuxlive`	17	`. /$MOUNTDIR/live/liblinuxlive`
18	`. /etc/init.d/functions`	18	`. /etc/init.d/functions`
19		19
20		20
21	`### -----------------------------------------------------------`	21	`### -----------------------------------------------------------`
22	`### Get boot parameters`	22	`### Get boot parameters`
23	`### -----------------------------------------------------------`	23	`### -----------------------------------------------------------`
24		24
25	`# do not start network`	25	`# do not start network`
26	`NONET=$( cmdline_parameter nonet )`	26	`NONET=$( cmdline_parameter nonet )`
27		27
28	`# static IP`	28	`# static IP`
29	`IPADDR=$( cmdline_value ip )`	29	`IPADDR=$( cmdline_value ip )`
30		30
31	`# gateway`	31	`# gateway`
32	`GATEWAY=$( cmdline_value gw )`	32	`GATEWAY=$( cmdline_value gw )`
33		33
34	`# netmask`	34	`# netmask`
35	`NETMASK=$( cmdline_value netmask )`	35	`NETMASK=$( cmdline_value netmask )`
36		36
37	`# start WLAN network on boot`	37	`# start WLAN network on boot`
38	`WLAN=$( cmdline_parameter wlan )`	38	`WLAN=$( cmdline_parameter wlan )`
39		39
40	`# do not apply any fixes (for debugging)`	40	`# do not apply any fixes (for debugging)`
41	`NOFIX=$( cmdline_parameter nofix )`	41	`NOFIX=$( cmdline_parameter nofix )`
42		42
43		43
44		44
45	`### -----------------------------------------------------------`	45	`### -----------------------------------------------------------`
46	`### Main`	46	`### Main`
47	`### -----------------------------------------------------------`	47	`### -----------------------------------------------------------`
48		48
49	`### run kudzu in quiet mode`	49	`### run kudzu in quiet mode`
50	`action $"Hardware auto-detection, please wait... " /usr/sbin/kudzu -q`	50	`action $"Hardware auto-detection, please wait... " /usr/sbin/kudzu -q`
51		51
52		52
53	`### never start on boot the following network devices (wifi0)`	53	`### never start on boot the following network devices (wifi0)`
54	`if [ ! $NOFIX ]; then`	54	`if [ ! $NOFIX ]; then`
55	`for iface in wifi0; do`	55	`for iface in wifi0; do`
56	`for file in networking/profiles/default/ifcfg \`	56	`for file in networking/profiles/default/ifcfg \`
57	`networking/devices/ifcfg \`	57	`networking/devices/ifcfg \`
58	`network-scripts/ifcfg; do`	58	`network-scripts/ifcfg; do`
59	`if [ -e /etc/sysconfig/${file}-${iface} ]; then`	59	`if [ -e /etc/sysconfig/${file}-${iface} ]; then`
60	`sed -i "s/ONBOOT=.*/ONBOOT=no/" /etc/sysconfig/${file}-${iface}`	60	`sed -i "s/ONBOOT=.*/ONBOOT=no/" /etc/sysconfig/${file}-${iface}`
61	`fi`	61	`fi`
62	`done`	62	`done`
63	`done`	63	`done`
64	`fi`	64	`fi`
65		65
66		66
67	`### do not start network devices, if NONET is defined`	67	`### do not start network devices, if NONET is defined`
68	`if [ $NONET ]; then`	68	`if [ $NONET ]; then`
69	`# find all network devices (exclude loopback device)`	69	`# find all network devices (exclude loopback device)`
70	`config_files=$( find /etc/sysconfig -name ifcfg-* 2>/dev/null \| grep -v ifcfg-lo )`	70	`config_files=$( find /etc/sysconfig -name ifcfg-* 2>/dev/null \| grep -v ifcfg-lo )`
71	`for file in $config_files; do`	71	`for file in $config_files; do`
72	`sed -i "s/ONBOOT=.*/ONBOOT=no/" $file`	72	`sed -i "s/ONBOOT=.*/ONBOOT=no/" $file`
73	`done`	73	`done`
74	`fi`	74	`fi`
75		75
76		76
77	`### define static IP and gateway, netmask`	77	`### define static IP and gateway, netmask`
78	`if [ $IPADDR ]; then`	78	`if [ $IPADDR ]; then`
79	`if [ ! $GATEWAY ]; then`	79	`if [ ! $GATEWAY ]; then`
80	`# default gatway x.y.z.1`	80	`# default gatway x.y.z.1`
81	`GATEWAY=$( echo $IPADDR \| awk -F"." '{ print $1"."$2"."$3".1" }' )`	81	`GATEWAY=$( echo $IPADDR \| awk -F"." '{ print $1"."$2"."$3".1" }' )`
82	`if [ ! $NETMASK ]; then`	82	`if [ ! $NETMASK ]; then`
83	`NETMASK=255.255.255.0`	83	`NETMASK=255.255.255.0`
84	`fi`	84	`fi`
85	`fi`	85	`fi`
86	`# create config files for eth0`	86	`# create config files for eth0`
87	`for iface in eth0; do`	87	`for iface in eth0; do`
88	`for file in networking/profiles/default/ifcfg \`	88	`for file in networking/profiles/default/ifcfg \`
89	`networking/devices/ifcfg \`	89	`networking/devices/ifcfg \`
90	`network-scripts/ifcfg; do`	90	`network-scripts/ifcfg; do`
91	`sed -i "s/BOOTPROTO=.*/BOOTPROTO=none/" /etc/sysconfig/${file}-${iface}`	91	`sed -i "s/BOOTPROTO=.*/BOOTPROTO=none/" /etc/sysconfig/${file}-${iface}`
92	`echo "IPADDR=$IPADDR" > /etc/sysconfig/${file}-${iface}`	92	`echo "IPADDR=$IPADDR" > /etc/sysconfig/${file}-${iface}`
93	`echo "NETMASK=$NETMASK" > /etc/sysconfig/${file}-${iface}`	93	`echo "NETMASK=$NETMASK" > /etc/sysconfig/${file}-${iface}`
94	`echo "GATEWAY=$GATEWAY" > /etc/sysconfig/${file}-${iface}`	94	`echo "GATEWAY=$GATEWAY" > /etc/sysconfig/${file}-${iface}`
95	`done`	95	`done`
96	`done`	96	`done`
97	`fi`	97	`fi`
98		98
99		99
100	`### activate ipw3945d daemon, if we have Intel IPW3945 WLAN`	100	`### activate ipw3945d daemon, if we have Intel IPW3945 WLAN`
101	`lspci \| grep -q Intel.*3945ABG`	101	`lspci \| grep -q Intel.*3945ABG`
-		102	`if [ "$?" = "0" ]; then`
102	`[ "$?" = "0" ] && chkconfig ipw3945d on 2>/dev/null`	103	`chkconfig ipw3945d on 2>/dev/null`
-		104	`/etc/init.d/ipw3945d start >/dev/null 2>&1 &`
103		105	`fi`
104		106
105	`### activate Atheros WLAN`	107	`### activate Atheros WLAN`
106	`lspci \| grep -q Ethernet.*Atheros`	108	`lspci \| grep -q Ethernet.*Atheros`
107	`if [ "$?" = "0" ]; then`	109	`if [ "$?" = "0" ]; then`
108	`# bring ath0 up`	110	`# bring ath0 up`
109	`ifconfig ath0 up > /dev/null 2>&1`	111	`ifconfig ath0 up > /dev/null 2>&1`
110	`# replace wifi0 with ath0`	112	`# replace wifi0 with ath0`
111	`for file in networking/profiles/default/ifcfg \`	113	`for file in networking/profiles/default/ifcfg \`
112	`networking/devices/ifcfg \`	114	`networking/devices/ifcfg \`
113	`network-scripts/ifcfg; do`	115	`network-scripts/ifcfg; do`
114	`if [ -e /etc/sysconfig/${file}-wifi0 ]; then`	116	`if [ -e /etc/sysconfig/${file}-wifi0 ]; then`
115	`mv /etc/sysconfig/${file}-wifi0 /etc/sysconfig/${file}-ath0`	117	`mv /etc/sysconfig/${file}-wifi0 /etc/sysconfig/${file}-ath0`
116	`sed -i "s/wifi0/ath0/" /etc/sysconfig/${file}-ath0`	118	`sed -i "s/wifi0/ath0/" /etc/sysconfig/${file}-ath0`
117	`grep -q Wireless /etc/sysconfig/${file}-ath0`	119	`grep -q Wireless /etc/sysconfig/${file}-ath0`
118	`[ "$?" != "0" ] && echo "TYPE=Wireless" >> /etc/sysconfig/${file}-ath0`	120	`[ "$?" != "0" ] && echo "TYPE=Wireless" >> /etc/sysconfig/${file}-ath0`
119	`fi`	121	`fi`
120	`done`	122	`done`
121	`fi`	123	`fi`
122		124
123		125
124	`### do not start WLAN devices on boot`	126	`### do not start WLAN devices on boot`
125	`if [ ! $WLAN ]; then`	127	`if [ ! $WLAN ]; then`
126	`# find all network devices (exclude loopback device)`	128	`# find all network devices (exclude loopback device)`
127	`config_files=$( find /etc/sysconfig -name ifcfg-* 2>/dev/null \| grep -v ifcfg-lo )`	129	`config_files=$( find /etc/sysconfig -name ifcfg-* 2>/dev/null \| grep -v ifcfg-lo )`
128	`for file in $config_files; do`	130	`for file in $config_files; do`
129	`# WLAN device?`	131	`# WLAN device?`
130	`grep -q TYPE=Wireless $file`	132	`grep -q TYPE=Wireless $file`
131	`if [ "$?" = "0" ]; then`	133	`if [ "$?" = "0" ]; then`
132	`sed -i "s/ONBOOT=.*/ONBOOT=no/" $file`	134	`sed -i "s/ONBOOT=.*/ONBOOT=no/" $file`
133	`fi`	135	`fi`
134	`done`	136	`done`
135	`fi`	137	`fi`
136		-
137		138
-		139
138	`### enable 915resolution on Intel Mobile Display controller`	140	`### enable 915resolution on Intel Mobile Display controller`
139	`lspci \| grep -q Display.Intel.Mobile`	141	`lspci \| grep -q Display.Intel.Mobile`
-		142	`if [ "$?" = "0" ]; then`
140	`[ "$?" = "0" ] && chkconfig 915resolution on`	143	`chkconfig 915resolution on`
-		144	`/etc/init.d/915resolution start >/dev/null 2>&1 &`
141		145	`fi`
-		146

Subversion Repositories livecd

(root)/trunk/customize/kudzu-auto @ 83 – Rev 81 → 83