Subversion Repositories lagranto.wrf

Rev

Rev 11 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed 

#!/bin/csh

# ---------------------------------------------------------------------
# Usage, parameter settings
# ---------------------------------------------------------------------

# Set Lagranto 
set LAGRANTO = ${LAGRANTOBASE}.${MODEL}/

# Write usage information
if ( (${#argv} == 0) | (${#argv} < 2) ) then
  echo 
  ${LAGRANTO}/bin/lagrantohelp trace short
  echo  
  exit 0
endif

# Write title
echo 
echo '========================================================='
echo '       *** START OF PREPROCESSOR TRACE ***              '
echo

# Get the arguments
set inpfile   = $1
set outfile   = $2

# Set base directories (run+prog)
set cdfdir=${PWD}
set tradir=${PWD}

# Set program paths and filenames 
set parfile = ${tradir}/trace.param 
set prog    = ${LAGRANTO}/trace/trace

# Set the prefix of the primary and secondary data files
set charp = 'P'
set chars = 'S'

echo '---- DIRECTORIES AND PROGRAMS ---------------------------'
echo    
echo "CDF directory         : ${cdfdir}"
echo "TRA directory         : ${tradir}"
echo "PROGRAM TRACE         : ${prog}"
echo "PARAMETER file        : ${parfile}"
echo

# ---------------------------------------------------------------------
# Set optional flags
# ---------------------------------------------------------------------

echo '---- OPTIONAL FLAGS -------------------------------------'
echo

# Set some default values ("nil" must be set according to input files)
set flag_i     = "nil"
set flag_v     = "tracevars"
set flag_f     = "nil"
set tvfile     = 'tracevars'
set noclean    = 'false'
set timecheck  = 'no' 
set intmode    = 'normal'

# Set flag for consistency
set isok = 1

while ( $#argv > 0 )

  switch ( $argv[1] )

   case -i
     set flag_i=$argv[2]
     echo "Flag '-i'     -> ${flag_i} (user defined)"
     shift;
   breaksw

   case -v
     set flag_v="-v"
     set tvfile=$argv[2]
     echo "Flag '-v'     -> ${tvfile} (user defined)"
     shift;
     if ( $isok == 2 ) set isok = 0
     if ( $isok == 1 ) set isok = 2
   breaksw

   case -f
     set flag_f="-f"
     set tvfile="tracevars.tmp"
     shift;
     set tvar="$argv[1]"
     shift;
     set tscale="$argv[1]"
     echo "Flag '-f'     -> ${tvar} ${tscale} (user defined)"
     if ( $isok == 2 ) set isok = 0
     if ( $isok == 1 ) set isok = 2
   breaksw

   case -noclean
     set noclean = 'true'
     echo "noclean       -> true (user defined)"
   breaksw

   case -timecheck
     set timecheck = 'yes'
     echo "timecheck               -> yes (user defined)"
   breaksw

   case -nearest
     set intmode = 'nearest'
     echo "intmode                 -> nearest (user defined)"
   breaksw
   
  endsw
 
  shift;

end

# Check consitency of arguments
if ( $isok == 0 ) then
    echo
    echo " ERROR: Use either option '-v' or '-f', but not both..."
    exit 1
endif

# ---------------------------------------------------------------------
# Handle the input trajectory file
# ---------------------------------------------------------------------

echo
echo '---- TIME RANGE -----------------------------------------'
echo

# Check whether the input file can be found
if ( ! -f ${inpfile} ) then
    echo " ERROR : Input file ${inpfile} is missing"
    exit 1
endif

# Get the start, end and reference date for the tracing
set startdate = `${LAGRANTO}/goodies/trainfo.sh ${inpfile} startdate` 
set enddate   = `${LAGRANTO}/goodies/trainfo.sh ${inpfile} enddate` 
set refdate   = `${LAGRANTO}/goodies/trainfo.sh ${inpfile} refdate` 
set ntra      =  `${LAGRANTO}/goodies/trainfo.sh ${inpfile} ntra`
set ntim      =  `${LAGRANTO}/goodies/trainfo.sh ${inpfile} ntim`
set ncol      =  `${LAGRANTO}/goodies/trainfo.sh ${inpfile} ncol`

# Check format of start and end date - must be the same
set ns=`echo $startdate | sed -e 's/_[0-9]*//' | wc -c`
set ne=`echo $enddate   | sed -e 's/_[0-9]*//' | wc -c`
if ( $ns != $ne ) then
  echo " ERROR: start and end date must be in the same format ***"
  exit 1
endif
if ( $ns != 9 ) then
  echo " ERROR: Date format must be yyyymmdd ***"
  exit 1
endif
set ns=`echo $startdate | sed -e 's/[0-9]*_//' | wc -c`
set ne=`echo $enddate   | sed -e 's/[0-9]*_//' | wc -c`
if ( $ns != $ne ) then
  echo " ERROR: start and end date must be in the same format ***"
  exit 1
endif
if ( ( $ns != 5 ) & ( $ns != 3 ) ) then
  echo " ERROR: Time format must be hh(mm) ***"
  exit 1
endif

# Split the start and end date into <yymmdd_hh and mm>
set startdate_ymdh = `echo $startdate | cut -c 1-11`
set startdate_min  = `echo $startdate | cut -c 12-13`
if ( $startdate_min == "" ) set startdate_min = 00
 
set enddate_ymdh = `echo $enddate | cut -c 1-11`
set enddate_min  = `echo $enddate | cut -c 12-13`
if ( $enddate_min == "" ) set enddate_min = 00

# Get the time difference between <start_ymdh> and <end_ymdh> date
# Decide whether trajectoriesare forward or backward
set timediff_hh = `${LAGRANTO}/goodies/gettidiff ${enddate_ymdh} ${startdate_ymdh}`

if ( $timediff_hh == 0 ) then
  if ( $enddate_min > $startdate_min ) then
    set direction = f
    set idir      = 1
  else
    set direction = b
    set idir      = -1
  endif
else if ( $timediff_hh > 0 ) then
  set direction = f
  set idir      = 1
else
  set direction = b
  set idir      = -1
  @ timediff_hh = $idir * $timediff_hh
endif

# Get also minutes for time difference, if <start_min> or <end_min> != 0
set timediff_mm=00

if ( $startdate_min != 00 || $enddate_min != 00 ) then
  @ min = ( $enddate_min - $startdate_min )
  if ( $min == 0 ) then
    set timediff_mm=
  else if ( $min > 0 ) then
    if ( $idir == 1 ) then
      set timediff_mm=$min
    else
      @ timediff_hh --
      @ timediff_mm = 60 - $min
    endif
  else
    if ( $idir == 1 ) then
      @ timediff_hh --
      @ timediff_mm = 60 + $min
    else
      @ timediff_mm = 0 - $min
    endif
  endif
endif

# Write status information
echo "Time range      : ${startdate} -> ${enddate}"
if ( ${timediff_mm} != "" ) then
   echo "Time difference : ${timediff_hh} h ${timediff_mm} min"
else
   echo "Time difference : ${timediff_hh} h"
endif
echo "Direction       : ${direction} (${idir})"

# ---------------------------------------------------------------------
# Check availability of input data 
# ---------------------------------------------------------------------

echo
echo '---- INPUT FILES ----------------------------------------'
echo

# Take the time increment from flag list ('nil', if not defined)
set timeinc = ${flag_i}

# Find a first data file (if possible corresponding to start/end date
# If starttime is not a data time, take the first file in the direectory
if ( $direction == "f" ) then
  set file=${charp}${startdate_ymdh}
else
  set file=${charp}${enddate_ymdh}
endif
if ( ! -f $file ) then
  set file=`ls ${charp}[0-9_]*[0-9] | head -1 | sed -e 's/@//'`
endif

# Determine timeinc (the time difference in hours between two data file)
# if not already defined with option -i
if ( ${timeinc} == "nil" ) then
  set date1=`echo $file | cut -c 2-`
  set n=`\ls ${charp}[0-9_]*[0-9] | grep -n $date1 | awk -F: '{print $1}'`
  @ n ++
  set date2=`\ls ${charp}[0-9_]*[0-9] | head -$n | tail -1 | cut -c 2-`
  set timeinc=`${LAGRANTO}/goodies/gettidiff $date2 $date1`
endif
if ( $timeinc == 0 ) then
    echo " ERROR: cannot set the time increment between input files ***"
    exit 1
endif

# Decide whether the time increment is smaller than 1 h; if so set the hires
# flag and convert the timeincement into fractional hour
set flag = `echo ${timeinc} | grep -n '\.'`
set hires = 0
if ( "${flag}" != "" ) then
  echo
  echo "Input files availability < 1 hour ($timeinc): switch to hires"
  echo "mode. All input files must be of form: P{yyyymmdd_hhmm}"
  set hires = 1
  set timeinc_min = `echo "(${timeinc} * 100 + 0.5)/1" | bc`
  set timeinc     = `echo "scale=2; ${timeinc} * 100 / 60" | bc`
  goto hires
endif

# Search the first file to use: We step through all P files and see whether they are
# good P files. Let's first do the test for the first data file found. If it's ok, we 
# take it; if not, we step through all P files and find the good one  
set flag=0
set td=

set date = `echo $file | cut -c 2-12`
set td1  = `${LAGRANTO}/goodies/gettidiff ${startdate_ymdh} ${date}`
set td2  = `${LAGRANTO}/goodies/gettidiff ${enddate_ymdh}   ${date}`

if (( $td1 < $timeinc || $td2 < $timeinc ) && ( $td1 >= 0 || $td2 >= 0 )) then
   set datfiles=$date
   if ( $td1 < $timeinc    ) set td=$td1
   if ( $td2 < $timeinc    ) set td=$td2
   if ( ( $startdate_min > 0 ) || ( $enddate_min > 0 ) ) @ td ++
   goto label2      
endif

foreach i ( ${charp}????????_?? )

  set date = `echo $i | cut -c 2-12`
  set td1  = `${LAGRANTO}/goodies/gettidiff ${startdate_ymdh} ${date}`
  set td2  = `${LAGRANTO}/goodies/gettidiff ${enddate_ymdh}   ${date}`

  if (( $td1 < $timeinc || $td2 < $timeinc ) && ( $td1 >= 0 || $td2 >= 0 )) then
      set datfiles=$date
      if ( $td1 < $timeinc    ) set td=$td1
      if ( $td2 < $timeinc    ) set td=$td2
      if ( ( $startdate_min > 0 ) || ( $enddate_min > 0 ) ) @ td ++
      goto label2
  endif

end

# if no P/T-files are available for the specified time period, then $td is
# still undefined
if ( $td == "" ) then
  echo " ERROR: no data files available for the specified time period"
  exit 1
endif

# If the input files come with time increment < 1 hour, handle it in this
# special section. The aim is not to 'interfere' with the well established
# code handling the standard case with time increment >= 1 hour. In this mode
# we require that the start and end date are available as P files: no start is
# allowed between the model output files
hires:

set flag=0
set td=0

if ( $direction == "f" ) then
  set file=${charp}${startdate}
else 
  set file=${charp}${enddate}
endif

if ( -f $file ) then
  set date     = `echo ${file} | cut -c 2-14`
  set datfiles = $date
  set td       = 0
  goto label2
else
  echo
  echo " ERROR: no data files available for the specified time period"
  exit 1
endif

# Everything is fine so far: proceed
label2:

# Check whether first date is ok - before or at needed dates
if ( $direction == "f" ) then
  set tdiff0 = `${LAGRANTO}/goodies/gettidiff ${startdate_ymdh} ${date}`
else
  set tdiff0 = `${LAGRANTO}/goodies/gettidiff ${enddate_ymdh} ${date}`
endif
  if ( $tdiff0 < 0 ) then
  echo " ERROR: data files missing for the specified time period"
  exit 1
endif

# Calculate the number of further files; handle hires (timeinc<1 h) and
# standard mode (timeinc >= 1 h) separately
if ( ${hires} == 0 ) then
   @ num = ( $timediff_hh + $td ) / $timeinc + 1
   @ dum1 = ( $num - 1 ) * $timeinc
   @ dum2 = $timediff_hh + $td
   if ( $dum1 != $dum2 ) @ num ++
else
    set num = `echo "( ${timediff_hh}*60 + ${timediff_mm} ) / ( ${timeinc_min} ) + 1" | bc`
endif 

# Get a list of all needed files
set numfiles=$num
set sfiles=1
echo $datfiles 
while ( $num > 1 )
  if ( $hires == 0 ) then
     set date=`${LAGRANTO}/goodies/newtime $date $timeinc`
  else
     echo ${date} ${timeinc_min}
     set date=`${LAGRANTO}/goodies/newtime $date $timeinc_min`
  endif
  
  echo ${date}
  
  if ( ! -f ${charp}${date} ) then
    echo " ERROR: file with primary data is missing for $date"
    exit 1
  else if ( ! -f ${chars}${date} ) then
    set sfiles=0
    set datfiles=`echo $datfiles $date`
  else
    set datfiles=`echo $datfiles $date`
  endif
  @ num --
end

# Calculate the start and the end time relative to the first datfile
if ( $direction == f ) then
  set tstart = `${LAGRANTO}/goodies/gettidiff $startdate $datfiles[1]`
  set tend   = `${LAGRANTO}/goodies/gettidiff $datfiles[$numfiles] $enddate`
else
  set tstart = `${LAGRANTO}/goodies/gettidiff $datfiles[$numfiles] $startdate`
  set tend   = `${LAGRANTO}/goodies/gettidiff $enddate $datfiles[1]`
endif

# Write some status information
echo "Primary file prefix               : ${charp}"
echo "Secondary file prefix             : ${chars}"
if ( ${hires} == 0 ) then
  echo "Time increment for input files : ${timeinc} h"
else
  echo "Time increment for input files : ${timeinc_min} min (0$timeinc h) "
endif
echo "# input files                     : ${numfiles}"
echo "First input file                  : $datfiles[1] " 
echo "Last input file                   : $datfiles[$numfiles] " 
echo "${charp} files availability              : 1"  
echo "${chars} files availability              : ${sfiles}"     
if ( $direction == f ) then
echo "Start time relative to first file : $datfiles[1] + ${tstart} "
echo "End time relative to last file    : $datfiles[$numfiles] - ${tend} "  
else
echo "Start time relative to last file  : $datfiles[$numfiles] - ${tstart} "
echo "End time relative to first file   : $datfiles[1] + ${tend} "
endif

# ---------------------------------------------------------------------
# Check availability of input data 
# ---------------------------------------------------------------------

echo
echo '---- TRACEVAR FILE --------------------------------------'
echo    

# If "-f" option is used, create a temporary tracevar file
if ( "${flag_f}" == "-f" ) then

#   Preset values for <compfl> and <tprefix>
    set tcompfl=1
    set tprefix='P'
    
#   Check availability on P file
    foreach var ( `${LAGRANTO}/goodies/getvars ${charp}$datfiles[1]` )
       if ( "${var}" == "${tvar}" ) then
          set tcompfl=0
          set tprefix="P"
       endif
    end

#   Check availability on S file 
    if ( ${sfiles} == 1 ) then
       foreach var ( `${LAGRANTO}/goodies/getvars ${chars}$datfiles[1]` )
         if ( "${var}" == "${tvar}" ) then
            set tcompfl=0
            set tprefix="S"
         endif
       end
    endif

#   Write the temporary <tracevars> file
    echo "${tvar} ${tscale} ${tcompfl} ${tprefix}" >! ${tvfile}
    echo "Temporary tracervar file <${tvfile}> created"
    echo

endif


# Check if tracevars-file exists
if ( ! -f $tvfile ) then
  echo  " ERROR:  file $tvfile was not found ***"
  exit 1
endif

# check if the variables contained in the tracevars-file are available in the
# data file and check also if there are no empty lines in the tracevars-file
 
set nlines = `cat $tvfile | wc -l`
set vars   = `cat $tvfile | awk '{print $1}'`
set nvars  = `echo $vars | wc -w`
if ( $nlines != $nvars ) then
  echo " ERROR: tracevars-files must not contain empty lines ***"
  exit 1
endif
set calf=`cat $tvfile | awk '{print $3}'`
set tfil=`cat $tvfile | awk '{print $4}'`
foreach v ( $vars )
  if ( $calf[1] == 0 ) then
    set v0 = `echo $v | awk 'BEGIN {FS = ":"}; {print $1}'`
    set flag=`${LAGRANTO}goodies/getvars $tfil[1]$datfiles[1] | grep " $v0 " | wc -l`
    set iscomment=`echo $v0 | cut -c 1` 
    if ( "${iscomment}" != "#" ) then 
         if ( $flag == 0 ) then
           echo " ERROR: variable $v listed in $tvfile is not on the $tfil[1]-files ***"
           exit 1
         endif
    endif
  endif
  shift calf
  shift tfil
end
set ntrace=${nlines} 

# Write some status information
cat ${tvfile}
echo
echo "# Number of tracing variables : ${ntrace}"

# ---------------------------------------------------------------------
# Prepare input file for caltra and run it
# ---------------------------------------------------------------------

# Write parameter file
\rm -f ${parfile}
touch ${parfile}

echo $inpfile                                              >> $parfile
echo $outfile                                              >> $parfile    
echo $startdate                                            >> $parfile
echo $enddate                                              >> $parfile
echo $idir                                                 >> $parfile
echo $numfiles                                             >> $parfile
foreach i ( $datfiles )
  echo $i                                                  >> $parfile
end
echo $timeinc                                              >> $parfile
echo $tstart                                               >> $parfile
echo $tend                                                 >> $parfile
echo $ntra                                                 >> $parfile
echo $ntim                                                 >> $parfile
echo $ncol                                                 >> $parfile
echo $ntrace                                               >> $parfile
cat ${tvfile}                                              >> $parfile
${LAGRANTO}/goodies/getvars ${charp}$datfiles[1] | wc -l   >> $parfile
${LAGRANTO}/goodies/getvars ${charp}$datfiles[1]           >> $parfile
if ( $sfiles == 1 ) then
  ${LAGRANTO}/goodies/getvars ${chars}$datfiles[1] | wc -l >> $parfile
  ${LAGRANTO}/goodies/getvars ${chars}$datfiles[1]         >> $parfile
else
  echo 0                                                   >> $parfile
endif
echo \"${timecheck}\"                                      >> $parfile
echo \"${intmode}\"                                        >> $parfile

# Finish the preprocessor
echo 
echo '       *** END OF PREPROCESSOR TRACE ***              '
echo '========================================================='
echo

# Run  trace
${prog}

if ( "${status}" != "0" ) then
  echo "ERROR:  Program <trace> failed"
  exit 1
endif

# ---------------------------------------------------------------------
# Final tasks (make clean)
# ---------------------------------------------------------------------

finish:

if ( "${noclean}" == "false" ) then
  \rm -f ${parfile}
endif

exit 0