Subversion Repositories lagranto.wrf

      PROGRAM caltra

C     ********************************************************************
C     *                                                                  *
C     * Calculates trajectories                                          *
C     *                                                                  *
C     * Heini Wernli       first version:       April 1993                   *
C     * Michael Sprenger   major upgrade:       2008-2009                *
C     *                                                                  *
C     ********************************************************************

      implicit none      

c     --------------------------------------------------------------------
c     Declaration of parameters
c     --------------------------------------------------------------------

c     Maximum number of levels for input files
      integer   nlevmax
      parameter (nlevmax=100)

c     Maximum number of input files (dates, length of trajectories)
      integer   ndatmax
      parameter (ndatmax=500)

c     Numerical epsilon (for float comparison)
      real      eps
      parameter (eps=0.001)

c     Distance in m between 2 lat circles 
      real      deltay
      parameter (deltay=1.112E5)

c     Number of iterations for iterative Euler scheme
      integer   numit
      parameter (numit=3)

c     Input and output format for trajectories (see iotra.f)
      integer   inpmode
      integer   outmode

c     Missing data value
      real      mdv
      parameter (mdv = -999. )

c     Filename prefix (typically 'P')
      character*1 prefix
      parameter   (prefix='P')

c     Externals
      real       sdis
      external   sdis

c     --------------------------------------------------------------------
c     Declaration of variables
c     --------------------------------------------------------------------

c     Input parameters
      integer                                fbflag          ! Flag for forward/backward mode
      integer                                numdat          ! Number of input files
      character*13                           dat(ndatmax)    ! Dates of input files
      real                                   timeinc         ! Time increment between input files
      integer                                per             ! Periodicity flag (=0 if none)
      integer                                ntra            ! Number of trajectories
      character*80                           cdfname         ! Name of output files
      real                                   ts              ! Time step
      real                                   tst,ten         ! Shift of start and end time relative to first data file
      integer                                deltout         ! Output time interval (in minutes)
      integer                                jflag           ! Jump flag (if =1 ground-touching trajectories reenter atmosphere)
      real                                   wfactor         ! Factor for vertical velocity field
      character*80                           strname         ! File with start positions
      character*80                           timecheck       ! Either 'yes' or 'no'
      character*10                                   gridflag        ! "ideal" or "real"
      real                                   aglconst        ! constant level above ground  
      real                                   isen            ! isentropic level
      character*80                           vertmode        ! Vertical mode (kinematic,aglconst)

c     Trajectories
      integer                                ncol            ! Number of columns for insput trajectories
      real,allocatable, dimension (:,:,:) :: trainp          ! Input start coordinates (ntra,1,ncol)
      real,allocatable, dimension (:,:,:) :: traout          ! Output trajectories (ntra,ntim,4)
      integer                                reftime(6)      ! Reference date
      character*80                           vars(200)       ! Field names
      real,allocatable, dimension (:)     :: xx0,yy0,pp0     ! Position of air parcels
      integer,allocatable, dimension (:)  :: leftflag        ! Flag for domain-leaving
      real                                   xx1,yy1,pp1     ! Updated position of air parcel
      integer                                leftcount       ! Number of domain leaving trajectories
      integer                                ntim            ! Number of output time steps

c     Meteorological fields
      real,allocatable, dimension (:)     :: spt0,spt1       ! Surface pressure
      real,allocatable, dimension (:)     :: uut0,uut1       ! Zonal wind
      real,allocatable, dimension (:)     :: vvt0,vvt1       ! Meridional wind
      real,allocatable, dimension (:)     :: wwt0,wwt1       ! Vertical wind
      real,allocatable, dimension (:)     :: p3t0,p3t1       ! 3d-pressure 
      real,allocatable, dimension (:)     :: tht0,tht1       ! potential temperature
      real,allocatable, dimension (:)     :: sth0,sth1       ! surface potential temperature 

c     Grid description
      real                                   pollon,pollat   ! Longitude/latitude of pole
      real                                   ak(nlevmax)     ! Vertical layers and levels
      real                                   bk(nlevmax) 
      real                                   xmin,xmax       ! Zonal grid extension
      real                                   ymin,ymax       ! Meridional grid extension
      integer                                nx,ny,nz        ! Grid dimensions
      real                                   dx,dy           ! Horizontal grid resolution
      integer                                hem             ! Flag for hemispheric domain
      real,allocatable, dimension (:,:)   :: mpx,mpy         ! Map scale factor in x,y direction
      real,allocatable, dimension (:,:)   :: lat,lon         ! Map scale factor in x,y direction

c     Auxiliary variables                 
      real                                   delta,rd
      integer                                itm,iloop,i,j,k,filo,lalo
      integer                                ierr,stat
      integer                                cdfid,fid
      real                                       tstart,time0,time1,time
      real                                   reltpos0,reltpos1
      real                                   xind,yind,pind,pp,sp,stagz
      character*80                           filename,varname
      integer                                reftmp(6)
      character                              ch
      real                                   frac,tload
      integer                                itim
      integer                                wstep
      character*80                           radunit
      real                                   lon1,lat1,lon2,lat2
      real                                   scale_max,scale_min

c     Externals
      real         int_index4
      external     int_index4

c     --------------------------------------------------------------------
c     Start of program, Read parameters
c     --------------------------------------------------------------------

c     Write start message
      print*,'========================================================='
      print*,'              *** START OF PROGRAM CALTRA ***'
      print*

c     Open the parameter file
      open(9,file='caltra.param')

c     Read flag for forward/backward mode (fbflag)
      read(9,*) fbflag

c     Read number of input files (numdat)
      read(9,*) numdat
      if (numdat.gt.ndatmax) then
        print*,' ERROR: too many input files ',numdat,ndatmax
        goto 993
      endif

c     Read list of input dates (dat, sort depending on forward/backward mode)
      if (fbflag.eq.1) then
        do itm=1,numdat
          read(9,'(a)') dat(itm)
        enddo
      else
        do itm=numdat,1,-1
          read(9,'(a)') dat(itm)
        enddo
      endif

c     Read time increment between input files (timeinc)
      read(9,*) timeinc

C     Read if data domain is periodic and its periodicity
      read(9,*) per


c     Read the number of trajectories and name of position file
      read(9,*) strname
      read(9,*) ntra
      read(9,*) ncol 
      if (ntra.eq.0) goto 991

C     Read the name of the output trajectory file and set the constants file
      read(9,*) cdfname

C     Read the timestep for trajectory calculation (convert from minutes to hours)
      read(9,*) ts
      ts=ts/60.    

C     Read shift of start and end time relative to first data file
      read(9,*) tst
      read(9,*) ten

C     Read output time interval (in minutes)
      read(9,*) deltout

C     Read jumpflag (if =1 ground-touching trajectories reenter the atmosphere)
      read(9,*) jflag

C     Read factor for vertical velocity field
      read(9,*) wfactor

c     Read the reference time and the time range
      read(9,*) reftime(1)                  ! year
      read(9,*) reftime(2)                  ! month
      read(9,*) reftime(3)                  ! day
      read(9,*) reftime(4)                  ! hour
      read(9,*) reftime(5)                  ! min
      read(9,*) reftime(6)                  ! time range (in min)

c     Read flag for 'no time check'
      read(9,*) timecheck
      
c     Read flag for trajectories at constant level above ground
      read(9,*) aglconst      
      
c     Read flag for trajectories at constant isentropic level
      read(9,*) isen      

c     Close the input file
      close(9)

c     Set the vertical mode of the trajectory calculation
      vertmode = 'kinematic'
      if ( aglconst.gt.0. ) then
         vertmode = 'aglconst'
      endif
      if ( isen.gt.0. ) then
         vertmode = 'isen'
      endif

c     Calculate the number of output time steps
      ntim = abs(reftime(6)/deltout) + 1

c     Set the formats of the input and output files
      call mode_tra(inpmode,strname)
      call mode_tra(outmode,cdfname)
      if (outmode.eq.-1) outmode=1

c     Write some status information
      print*,'---- INPUT PARAMETERS -----------------------------------'
      print* 
      print*,'  Forward/Backward       : ',fbflag
      print*,'  #input files           : ',numdat
      print*,'  First/last input file  : ',trim(dat(1)),' ... ',
     >                                     trim(dat(numdat))
      print*,'  time increment         : ',timeinc
      print*,'  Output file            : ',trim(cdfname)
      print*,'  Time step (min)        : ',60.*ts
      write(*,'(a27,f7.2,f7.2)') '   Time shift (start,end) : ',tst,ten
      print*,'  Output time interval   : ',deltout
      print*,'  Jump flag              : ',jflag
      print*,'  Vertical wind (scale)  : ',wfactor
      print*,'  Trajectory pos file    : ',trim(strname)
      print*,'  # of trajectories      : ',ntra
      print*,'  # of output timesteps  : ',ntim
      if ( inpmode.eq.-1) then
         print*,'  Input format           : (x,y,z)-list'
      else
         print*,'  Input format           : ',inpmode
      endif
      print*,'  Output format          : ',outmode
      print*,'  Periodicity            : ',per
      print*,'  Time check             : ',trim(timecheck)
      if ( vertmode.eq.'aglconst' ) then
         print*,'  Z = const AGL          : ',aglconst
      endif
      if ( vertmode.eq.'isen' ) then
         print*,'  isentropic             : ',isen
      endif
      
      print*

      print*,'---- FIXED NUMERICAL PARAMETERS -------------------------'
      print*
      print*,'  Number of iterations   : ',numit
      print*,'  Filename prefix        : ',prefix
      print*,'  Missing data value     : ',mdv
      print*

c     --------------------------------------------------------------------
c     Read grid parameters, checks and allocate memory
c     --------------------------------------------------------------------

c     Read the constant grid parameters (nx,ny,nz,xmin,xmax,ymin,ymax,pollon,pollat)
c     The negative <-fid> of the file identifier is used as a flag for parameter retrieval  
      filename = prefix//dat(1)
      varname  = 'U'
      nx       = 1
      ny       = 1
      nz       = 1
      tload    = -tst
      call input_open (fid,filename)
          call input_grid_wrf(fid,xmin,xmax,ymin,ymax,dx,dy,nx,ny,nz)
      call input_close(fid)

C     Check if the number of levels is too large
      if (nz.gt.nlevmax) goto 993

C     Set logical flag for hemispheric mode (not yet supported)
      hem = 0

C     Allocate memory for some meteorological arrays
      allocate(spt0(nx*ny),stat=stat)
      if (stat.ne.0) print*,'*** error allocating array spt0 ***'   ! Surface geopotential height
      allocate(spt1(nx*ny),stat=stat)
      if (stat.ne.0) print*,'*** error allocating array spt1 ***'
      allocate(uut0(nx*ny*nz),stat=stat)
      if (stat.ne.0) print*,'*** error allocating array uut0 ***'   ! Zonal wind
      allocate(uut1(nx*ny*nz),stat=stat)
      if (stat.ne.0) print*,'*** error allocating array uut1 ***'
      allocate(vvt0(nx*ny*nz),stat=stat)
      if (stat.ne.0) print*,'*** error allocating array vvt0 ***'   ! Meridional wind
      allocate(vvt1(nx*ny*nz),stat=stat)
      if (stat.ne.0) print*,'*** error allocating array vvt1 ***'
      allocate(wwt0(nx*ny*nz),stat=stat)
      if (stat.ne.0) print*,'*** error allocating array wwt0 ***'   ! Vertical wind
      allocate(wwt1(nx*ny*nz),stat=stat)
      if (stat.ne.0) print*,'*** error allocating array wwt1 ***'
      allocate(p3t0(nx*ny*nz),stat=stat)
      if (stat.ne.0) print*,'*** error allocating array p3t0 ***'   ! geopotential height
      allocate(p3t1(nx*ny*nz),stat=stat)
      if (stat.ne.0) print*,'*** error allocating array p3t1 ***'
      allocate(mpx(nx,ny),stat=stat)
      if (stat.ne.0) print*,'*** error allocating array mpx * **'   ! Map scale factor in x
      allocate(mpy(nx,ny),stat=stat)
      if (stat.ne.0) print*,'*** error allocating array mpy ***'    ! Map scale factor in y
      allocate(lon(nx,ny),stat=stat)
      if (stat.ne.0) print*,'*** error allocating array lon ***'    ! Grid -> lon
      allocate(lat(nx,ny),stat=stat)
      if (stat.ne.0) print*,'*** error allocating array lat ***'    ! Gridy -> lat

C     Get memory for trajectory arrays
      allocate(trainp(ntra,1,ncol),stat=stat)
      if (stat.ne.0) print*,'*** error allocating array trainp   ***' ! Input start coordinates
      allocate(traout(ntra,ntim,4),stat=stat)
      if (stat.ne.0) print*,'*** error allocating array traout   ***' ! Output trajectories
      allocate(xx0(ntra),stat=stat)
      if (stat.ne.0) print*,'*** error allocating array xx0      ***' ! X position (longitude)
      allocate(yy0(ntra),stat=stat)
      if (stat.ne.0) print*,'*** error allocating array yy0      ***' ! Y position (latitude)
      allocate(pp0(ntra),stat=stat)
      if (stat.ne.0) print*,'*** error allocating array pp0      ***' ! Pressure
      allocate(leftflag(ntra),stat=stat)
      if (stat.ne.0) print*,'*** error allocating array leftflag ***' ! Leaving-domain flag

c     Get memory for potential temperature (isentropic trajectories)
      if ( vertmode.eq.'isen' ) then
          allocate(tht0(nx*ny*nz),stat=stat)
          if (stat.ne.0) print*,'*** error allocating array tht0 ***'
          allocate(tht1(nx*ny*nz),stat=stat)
          if (stat.ne.0) print*,'*** error allocating array tht1 ***'
          allocate(sth0(nx*ny),stat=stat)
          if (stat.ne.0) print*,'*** error allocating array sth0 ***'
          allocate(sth1(nx*ny),stat=stat)
          if (stat.ne.0) print*,'*** error allocating array sth1 ***'
      endif

c     Write some status information
      print*,'---- CONSTANT GRID PARAMETERS ---------------------------'
      print*
      print*,'  xmin,xmax     : ',xmin,xmax
      print*,'  ymin,ymax     : ',ymin,ymax
      print*,'  dx,dy         : ',dx,dy
      print*,'  nx,ny,nz      : ',nx,ny,nz
      print*,'  per, hem      : ',per,hem
      print*

c     --------------------------------------------------------------------
c     Calculate the map scale factors
c     --------------------------------------------------------------------

c     Read lon/lat on the model grid from first data file
      filename = prefix//dat(1)
      call input_open (fid,filename)
      varname='XLONG'
      call input_var_wrf(fid,varname,lon,nx,ny,1)
      varname='XLAT'
      call input_var_wrf(fid,varname,lat,nx,ny,1)
      call input_close(fid)

c     Get map scale for interior points
      do i=2,nx-1
         do j=2,ny-1

c           Map scale in x direction
            lon1     = lon(i-1,j)
            lat1     = lat(i-1,j)
            lon2     = lon(i+1,j)
            lat2     = lat(i+1,j)
            radunit  = 'km.haversine'
            mpx(i,j) = 0.5 * 1000. * sdis(lon1,lat1,lon2,lat2,radunit)

c           Map scale in y direction
            lon1     = lon(i,j-1)
            lat1     = lat(i,j-1)
            lon2     = lon(i,j+1)
            lat2     = lat(i,j+1)
            radunit  = 'km.haversine'
            mpy(i,j) = 0.5 * 1000. * sdis(lon1,lat1,lon2,lat2,radunit)

         enddo
      enddo

c     Copy map scale for boundary points
      do i=2,nx-1
        mpx(i, 1) = mpx(i,   2)
        mpx(i,ny) = mpx(i,ny-1)
        mpy(i, 1) = mpy(i,   2)
        mpy(i,ny) = mpy(i,ny-1)
      enddo
      do j=2,ny-1
        mpx(1, j) = mpx(2,   j)
        mpx(nx,j) = mpx(nx-1,j)
        mpy(1, j) = mpy(2,   j)
        mpy(nx,j) = mpy(nx-1,j)
      enddo
      mpx(1,1)   = mpx(2,2)
      mpy(1,1)   = mpy(2,2)
      mpx(nx,1)  = mpx(nx-1,2)
      mpy(nx,1)  = mpy(nx-1,2)
      mpx(nx,ny) = mpx(nx-1,ny-1)
      mpy(nx,ny) = mpy(nx-1,ny-1)
      mpx(1,ny)  = mpx(2,ny-1)
      mpy(1,ny)  = mpy(2,ny-1)

c         Write some status information
      print*,'---- MAPPING SCALE FACTORS -----------------------------'
      print*

      scale_max = mpx(1,1)
      scale_min = mpx(1,1)
      do i=1,nx
        do j=1,ny
           if ( mpx(i,j).gt.scale_max ) scale_max = mpx(i,j)
           if ( mpx(i,j).lt.scale_min ) scale_min = mpx(i,j)
         enddo
      enddo
      print*,'  map scale x (min,max) : ',scale_min,scale_max
      scale_max = mpy(1,1)
      scale_min = mpy(1,1)
      do i=1,nx
        do j=1,ny
           if ( mpy(i,j).gt.scale_max ) scale_max = mpy(i,j)
           if ( mpy(i,j).lt.scale_min ) scale_min = mpy(i,j)
         enddo
      enddo
      print*,'  map scale y (min,max) : ',scale_min,scale_max
      print*

c     --------------------------------------------------------------------
c     Initialize the trajectory calculation
c     --------------------------------------------------------------------

c     Read start coordinates from file - Format (x,y,lev)
      if (inpmode.eq.-1) then
         open(fid,file=strname)
          do i=1,ntra
             read(fid,*) xx0(i),yy0(i),pp0(i)
          enddo
         close(fid)

c     Read start coordinates from trajectory file - check consistency of ref time
      else
         call ropen_tra(cdfid,strname,ntra,1,ncol,reftmp,vars,inpmode)
         call read_tra (cdfid,trainp,ntra,1,ncol,inpmode)
         do i=1,ntra
            time   = trainp(i,1,1)
            xx0(i) = trainp(i,1,2) 
            yy0(i) = trainp(i,1,3) 
            pp0(i) = trainp(i,1,4) 
         enddo
         call close_tra(cdfid,inpmode)

         if ( ( vars(2).ne.'x').and.(vars(3).ne.'y') ) then
            print*,' ERROR: starting positions must be in x/y/z format'
            stop
         endif

         if ( ( reftime(1).ne.reftmp(1) ).or.
     >        ( reftime(2).ne.reftmp(2) ).or.
     >        ( reftime(3).ne.reftmp(3) ).or.
     >        ( reftime(4).ne.reftmp(4) ).or.
     >        ( reftime(5).ne.reftmp(5) ) )
     >   then
            print*,' WARNING: Inconsistent reference times'
            write(*,'(5i8)') (reftime(i),i=1,5)
            write(*,'(5i8)') (reftmp (i),i=1,5)
            print*,' Enter a key to proceed...'
            stop
         endif
      endif

c     Transform start coordinates from index space to WRF grid
      do i=1,ntra
         xx0(i) = xmin + ( xx0(i) - 1. ) * dx
         yy0(i) = ymin + ( yy0(i) - 1. ) * dy
      enddo

c     Set sign of time range
      reftime(6) = fbflag * reftime(6)
         
c     Write some status information
      print*,'---- REFERENCE DATE---------- ---------------------------'
      print*
      print*,' Reference time (year)  :',reftime(1)
      print*,'                (month) :',reftime(2)
      print*,'                (day)   :',reftime(3)
      print*,'                (hour)  :',reftime(4)
      print*,'                (min)   :',reftime(5)
      print*,' Time range             :',reftime(6),' min'
      print*

C     Save starting positions - vertical position will be corrected below for <aglconst> and <isen>
      itim = 1
      do i=1,ntra
         traout(i,itim,1) = 0.
         traout(i,itim,2) = xx0(i)
         traout(i,itim,3) = yy0(i)
         traout(i,itim,4) = pp0(i)
      enddo
      
c     Init the flag and the counter for trajectories leaving the domain
      leftcount=0
      do i=1,ntra
         leftflag(i)=0
      enddo

C     Convert time shifts <tst,ten> from <hh.mm> into fractional time
      call hhmm2frac(tst,frac)
      tst = frac
      call hhmm2frac(ten,frac)
      ten = frac

c     Adjust the starting heights in mode <aglconst>
      if ( vertmode.eq.'aglconst' ) then
        filename = prefix//dat(1)
        call input_open (fid,filename)
              varname='geopot'                          ! geopot.height
              call input_var_wrf(fid,varname,p3t0,nx,ny,nz)
              varname='geopots'                         ! geopot.height at surface
              call input_var_wrf(fid,varname,spt0,nx,ny,1)
        call input_close(fid)
        filename = prefix//dat(2)
        call input_open (fid,filename)
              varname='geopot'                          ! geopot.height
              call input_var_wrf(fid,varname,p3t1,nx,ny,nz)
              varname='geopots'                         ! geopot.height at surface
              call input_var_wrf(fid,varname,spt1,nx,ny,1)
        call input_close(fid)
        do i=1,ntra
           call get_index4 (xind,yind,pind,xx0(i),yy0(i),0.,reltpos0,
     >                      p3t0,p3t1,spt0,spt1,3,
     >                      nx,ny,nz,xmin,ymin,dx,dy,mdv)
           sp = int_index4 (spt0,spt1,nx,ny,1,xind,yind,1.,reltpos0,mdv)
           traout(i,1,4) = sp + aglconst
        enddo
      endif
      
c     Adjust the starting heights in mode <isen>
      if ( vertmode.eq.'isen' ) then
        filename = prefix//dat(1)
        call input_open (fid,filename)
              varname='geopot'                          ! geopot.height
              call input_var_wrf(fid,varname,p3t0,nx,ny,nz)
              varname='geopots'                         ! geopot.height at surface
              call input_var_wrf(fid,varname,spt0,nx,ny,1)
          varname='TH'                                  ! TH
          call input_var_wrf(fid,varname,tht0,nx,ny,nz)
          do i=1,nx*ny 
              sth0(i) = tht0(i)
          enddo
        call input_close(fid)
        filename = prefix//dat(2)
        call input_open (fid,filename)
              varname='geopot'                          ! geopot.height
              call input_var_wrf(fid,varname,p3t1,nx,ny,nz)
              varname='geopots'                         ! geopot.height at surface
              call input_var_wrf(fid,varname,spt1,nx,ny,1)
          varname='TH'                                  ! TH
          call input_var_wrf(fid,varname,tht1,nx,ny,nz)
          do i=1,nx*ny 
              sth1(i) = tht1(i)
          enddo
        call input_close(fid)
        do i=1,ntra
        
          call get_index4 (xind,yind,pind,xx0(i),yy0(i),isen,reltpos0,
     >                    tht0,tht1,sth0,sth1,1,
     >                    nx,ny,nz,xmin,ymin,dx,dy,mdv)
          traout(i,1,4) = int_index4 
     >          (p3t0,p3t1,nx,ny,nz,xind,yind,pind,reltpos0,mdv)
        enddo
      endif

c     -----------------------------------------------------------------------
c     Loop to calculate trajectories
c     -----------------------------------------------------------------------

c     Write some status information
      print*,'---- TRAJECTORIES ----------- ---------------------------'
      print*    

C     Set the time for the first data file (depending on forward/backward mode)
      if (fbflag.eq.1) then
        tstart = -tst
      else
        tstart = tst
      endif

c     Set the minute counter for output
      wstep = 0

c     Read wind fields and vertical grid from first file
      filename = prefix//dat(1)

      call frac2hhmm(tstart,tload)

      write(*,'(a16,a20,2f7.2)') '  (file,time) : ',
     >                       trim(filename),tload

      call input_open (fid,filename)

      varname='U'                                       ! U
          call input_var_wrf(fid,varname,uut1,nx,ny,nz)

          varname='V'                                   ! V
          call input_var_wrf(fid,varname,vvt1,nx,ny,nz)
        
          varname='W'                                   ! W
          call input_var_wrf(fid,varname,wwt1,nx,ny,nz)

          varname='geopot'                              ! geopot.height
          call input_var_wrf(fid,varname,p3t1,nx,ny,nz)

          varname='geopots'                             ! geopot.height at surface
          call input_var_wrf(fid,varname,spt1,nx,ny,1)

      if (vertmode.eq.'isen') then
           varname='TH'                                 ! TH
               call input_var_wrf(fid,varname,tht1,nx,ny,nz)
           do i=1,nx*ny 
              sth1(i) = tht1(i)
           enddo
      endif

      call input_close(fid)

c     Loop over all input files (time step is <timeinc>)
      do itm=1,numdat-1

c       Calculate actual and next time
        time0 = tstart+real(itm-1)*timeinc*fbflag
        time1 = time0+timeinc*fbflag

c       Copy old velocities and pressure fields to new ones       
        do i=1,nx*ny*nz
           uut0(i)=uut1(i)
           vvt0(i)=vvt1(i)
           wwt0(i)=wwt1(i)
           p3t0(i)=p3t1(i)
        enddo
        do i=1,nx*ny
           spt0(i)=spt1(i)
        enddo

c       Copy potential temperature
        if ( vertmode.eq.'isen' ) then
           do i=1,nx*ny*nz
              tht0(i)=tht1(i)
           enddo
           do i=1,nx*ny
             sth0(i)=sth1(i)
           enddo
        endif

c       Read wind fields and surface pressure at next time
        filename = prefix//dat(itm+1)

        call frac2hhmm(time1,tload)
        write(*,'(a16,a20,2f7.2)') '  (file,time) : ',
     >                          trim(filename),tload

        call input_open (fid,filename)

            varname='U'                                 ! U
            call input_var_wrf(fid,varname,uut1,nx,ny,nz)

            varname='V'                                 ! V
            call input_var_wrf(fid,varname,vvt1,nx,ny,nz)
        
            varname='W'                                 ! W
            call input_var_wrf(fid,varname,wwt1,nx,ny,nz)

            varname='geopot'                            ! geopot.height
            call input_var_wrf(fid,varname,p3t1,nx,ny,nz)

            varname='geopots'                           ! geopot.height
            call input_var_wrf(fid,varname,spt1,nx,ny,1)
        
        if (vertmode.eq.'isen') then
           varname='TH'                                 ! TH
               call input_var_wrf(fid,varname,tht1,nx,ny,nz)
           do i=1,nx*ny 
              sth1(i) = tht1(i)
           enddo
        endif
        
        call input_close(fid)
        
C       Determine the first and last loop indices
        if (numdat.eq.2) then
          filo = nint(tst/ts)+1
          lalo = nint((timeinc-ten)/ts) 
        elseif ( itm.eq.1 ) then
          filo = nint(tst/ts)+1
          lalo = nint(timeinc/ts)
        else if (itm.eq.numdat-1) then
          filo = 1
          lalo = nint((timeinc-ten)/ts)
        else
          filo = 1
          lalo = nint(timeinc/ts)
        endif

c       Split the interval <timeinc> into computational time steps <ts>
        do iloop=filo,lalo

C         Calculate relative time position in the interval timeinc (0=beginning, 1=end)
          reltpos0 = ((real(iloop)-1.)*ts)/timeinc
          reltpos1 = real(iloop)*ts/timeinc

C         Initialize counter for domain leaving trajectories
          leftcount=0

c         Timestep for all trajectories
          do i=1,ntra                

C           Check if trajectory has already left the data domain
            if (leftflag(i).ne.1) then  

c             Iterative Euler timestep (x0,y0,p0 -> x1,y1,p1)
              if ( vertmode.eq.'kinematic' ) then
                 call euler_kinematic(
     >               xx1,yy1,pp1,leftflag(i),
     >               xx0(i),yy0(i),pp0(i),reltpos0,reltpos1,
     >               ts*3600,numit,jflag,mdv,wfactor,fbflag,
     >               spt0,spt1,p3t0,p3t1,uut0,uut1,vvt0,vvt1,wwt0,wwt1,
     >               xmin,ymin,dx,dy,per,hem,nx,ny,nz,mpx,mpy)
              elseif ( vertmode.eq.'aglconst' ) then
                 call euler_aglconst(
     >               xx1,yy1,pp1,leftflag(i),
     >               xx0(i),yy0(i),pp0(i),reltpos0,reltpos1,
     >               ts*3600,numit,jflag,mdv,wfactor,fbflag,
     >               spt0,spt1,p3t0,p3t1,uut0,uut1,vvt0,vvt1,
     >               xmin,ymin,dx,dy,per,hem,nx,ny,nz,mpx,mpy,aglconst)
              elseif ( vertmode.eq.'isen' ) then
                 call euler_isen(
     >               xx1,yy1,pp1,leftflag(i),
     >               xx0(i),yy0(i),pp0(i),reltpos0,reltpos1,
     >               ts*3600,numit,jflag,mdv,wfactor,fbflag,
     >               spt0,spt1,p3t0,p3t1,uut0,uut1,vvt0,vvt1,
     >               tht0,tht1,sth0,sth1,
     >               xmin,ymin,dx,dy,per,hem,nx,ny,nz,mpx,mpy,isen)
     
              endif

c             Update trajectory position, or increase number of trajectories leaving domain
              if (leftflag(i).eq.1) then
                leftcount=leftcount+1
                if ( leftcount.lt.10 ) then
                   print*,'     -> Trajectory ',i,' leaves domain'
                elseif ( leftcount.eq.10 ) then
                   print*,'     -> N>=10 trajectories leave domain'
                endif
              else
                xx0(i)=xx1      
                yy0(i)=yy1
                pp0(i)=pp1
              endif

c          Trajectory has already left data domain (mark as <mdv>)
           else
              xx0(i)=mdv
              yy0(i)=mdv
              pp0(i)=mdv
              
           endif

          enddo

C         Save positions only every deltout minutes
          delta = aint(iloop*60*ts/deltout)-iloop*60*ts/deltout
          if (abs(delta).lt.eps) then
            time = time0+reltpos1*timeinc*fbflag
            itim = itim + 1
            do i=1,ntra
               call frac2hhmm(time,tload)
               traout(i,itim,1) = tload
               traout(i,itim,2) = xx0(i)
               traout(i,itim,3) = yy0(i) 
               traout(i,itim,4) = pp0(i)
            enddo
          endif

        enddo

      enddo

c     Transform trajectory position from WRF grid do grid index
      do i=1,ntra
        do j=1,ntim
           if ( abs(traout(i,j,2)-mdv).gt.eps ) then
              traout(i,j,2) = ( traout(i,j,2) - xmin ) / dx + 1.
           else
              traout(i,j,2) = mdv
           endif
           if ( abs(traout(i,j,3)-mdv).gt.eps ) then
              traout(i,j,3) = ( traout(i,j,3) - ymin ) / dy + 1.
           else
              traout(i,j,3) = mdv
           endif
        enddo
      enddo

c     Write trajectory file
      vars(1)  ='time'
      vars(2)  ='x'
      vars(3)  ='y'
      vars(4)  ='z'
      call wopen_tra(cdfid,cdfname,ntra,ntim,4,reftime,vars,outmode)
      call write_tra(cdfid,traout,ntra,ntim,4,outmode)
      call close_tra(cdfid,outmode)   

c     Write some status information, and end of program message
      print*  
      print*,'---- STATUS INFORMATION --------------------------------'
      print*
      print*,'  #leaving domain    ', leftcount
      print*,'  #staying in domain ', ntra-leftcount
      print*
      print*,'              *** END OF PROGRAM CALTRA ***'
      print*,'========================================================='

      stop

c     ------------------------------------------------------------------
c     Exception handling
c     ------------------------------------------------------------------

 991  write(*,*) '*** ERROR: all start points outside the data domain'
      call exit(1)
      
 992  write(*,*) '*** ERROR: close arrays on files (prog. closear)'
      call exit(1)

 993  write(*,*) '*** ERROR: problems with array size'
      call exit(1)

      end 


c     *******************************************************************
c     * Time step : either Euler or Runge-Kutta                         *
c     *******************************************************************

C     Time-step from (x0,y0,p0) to (x1,y1,p1)
C
C     (x0,y0,p0) input  coordinates (long,lat,p) for starting point
C     (x1,y1,p1) output coordinates (long,lat,p) for end point
C     deltat     input  timestep in seconds
C     numit      input  number of iterations
C     jump       input  flag (=1 trajectories don't enter the ground)
C     left       output flag (=1 if trajectory leaves data domain)

c     -------------------------------------------------------------------
c     Iterative Euler time step - kinematic trajectory
c     -------------------------------------------------------------------

      subroutine euler_kinematic
     >          (x1,y1,p1,left,x0,y0,p0,reltpos0,reltpos1,
     >           deltat,numit,jump,mdv,wfactor,fbflag,
     >               spt0,spt1,p3d0,p3d1,uut0,uut1,vvt0,vvt1,wwt0,wwt1,
     >           xmin,ymin,dx,dy,per,hem,nx,ny,nz,mpx,mpy)

      implicit none

c     Flag for test mode
      integer      test
      parameter    (test=0)

c     Declaration of subroutine parameters
      integer      nx,ny,nz
      real         x1,y1,p1
      integer      left
      real             x0,y0,p0
      real         reltpos0,reltpos1
      real         deltat
      integer      numit
      integer      jump
      real         wfactor
      integer      fbflag
      real         spt0(nx*ny)   ,spt1(nx*ny)
      real         uut0(nx*ny*nz),uut1(nx*ny*nz)
      real             vvt0(nx*ny*nz),vvt1(nx*ny*nz)
      real         wwt0(nx*ny*nz),wwt1(nx*ny*nz)
      real         p3d0(nx*ny*nz),p3d1(nx*ny*nz)
      real         xmin,ymin,dx,dy
      integer      per
      integer      hem
      real         mdv
      real         mpx(nx*ny),mpy(nx*ny)

c     Auxiliary variables
      real         xmax,ymax
      real             xind,yind,pind

      real             u0,v0,w0,u1,v1,w1,u,v,w,sp
      integer      icount
      character    ch
      real         mpsc_x,mpsc_y

c     Externals    
      real         int_index4
      external     int_index4

c     Reset the flag for domain-leaving
      left=0

c     Set the esat-north boundary of the domain
      xmax = xmin+real(nx-1)*dx
      ymax = ymin+real(ny-1)*dy

C     Interpolate wind fields to starting position (x0,y0,p0)
      call get_index4 (xind,yind,pind,x0,y0,p0,reltpos0,
     >                 p3d0,p3d1,spt0,spt1,3,
     >                 nx,ny,nz,xmin,ymin,dx,dy,mdv)

      u0 = int_index4(uut0,uut1,nx,ny,nz,xind,yind,pind,reltpos0,mdv)
      v0 = int_index4(vvt0,vvt1,nx,ny,nz,xind,yind,pind,reltpos0,mdv)
      w0 = int_index4(wwt0,wwt1,nx,ny,nz,xind,yind,pind,reltpos0,mdv)

c     Force the near-surface wind to zero
      if (pind.lt.1.) w0=w0*pind

C     For first iteration take ending position equal to starting position
      x1=x0
      y1=y0
      p1=p0

C     Iterative calculation of new position
      do icount=1,numit

C        Calculate new winds for advection
         call get_index4 (xind,yind,pind,x1,y1,p1,reltpos1,
     >                    p3d0,p3d1,spt0,spt1,3,
     >                    nx,ny,nz,xmin,ymin,dx,dy,mdv)
         u1 = int_index4(uut0,uut1,nx,ny,nz,xind,yind,pind,reltpos1,mdv)
         v1 = int_index4(vvt0,vvt1,nx,ny,nz,xind,yind,pind,reltpos1,mdv)
         w1 = int_index4(wwt0,wwt1,nx,ny,nz,xind,yind,pind,reltpos1,mdv)

c        Force the near-surface wind to zero
         if (pind.lt.1.) w1=w1*pind
 
c        Get the new velocity in between
         u=(u0+u1)/2.
         v=(v0+v1)/2.
         w=(w0+w1)/2.
         
c        Get the mapping scale factors for this position
         mpsc_x = int_index4 (mpx,mpx,nx,ny,1,xind,yind,1.,reltpos1,mdv)
         mpsc_y = int_index4 (mpy,mpy,nx,ny,1,xind,yind,1.,reltpos1,mdv)

C        Calculate new positions (adapted for cartesian grid)
         x1 = x0 + fbflag * deltat * u * dx/mpsc_x
         y1 = y0 + fbflag * deltat * v * dy/mpsc_y
         p1 = p0 + fbflag * deltat * w * wfactor

c        Write the update positions for tests
         if ( (icount.eq.3).and.(test.eq.1) ) then
            write(*,'(10f10.2)') x0,u,x1-x0,p0,w,p1-p0
         endif

C       Interpolate surface geop.height to actual position
        call get_index4 (xind,yind,pind,x1,y1,0.,reltpos1,
     >                   p3d0,p3d1,spt0,spt1,3,
     >                   nx,ny,nz,xmin,ymin,dx,dy,mdv)
        sp = int_index4 (spt0,spt1,nx,ny,1,xind,yind,1.,reltpos1,mdv)

c       Handle trajectories which cross the lower boundary (jump flag)
        if ((jump.eq.1).and.(p1.lt.sp)) p1=sp+10.

c       Handle periodioc boundaries for 'ideal' mode
        if ( per.eq.1 ) then
                if ( x1.gt.xmax ) x1=x1-xmax
                if ( x1.lt.xmin ) x1=x1+xmax
        endif
 
C       Check if trajectory leaves data domain
        if ( (x1.lt.xmin).or.(x1.gt.xmax).or.
     >       (y1.lt.ymin).or.(y1.gt.ymax).or.(p1.lt.sp) )   ! geopot : .lt. ; pressure: .gt.
     >  then
          left=1
          print*,x1,y1,p1
          print*,xmin,ymin
              print*,xmax,ymax
              print*,sp
          goto 100
        endif

      enddo

c     Exit point for subroutine
 100  continue

      return

      end

c     -------------------------------------------------------------------
c     Iterative Euler time step - constant level above ground
c     -------------------------------------------------------------------

      subroutine euler_aglconst
     >          (x1,y1,p1,left,x0,y0,p0,reltpos0,reltpos1,
     >           deltat,numit,jump,mdv,wfactor,fbflag,
     >               spt0,spt1,p3d0,p3d1,uut0,uut1,vvt0,vvt1,
     >           xmin,ymin,dx,dy,per,hem,nx,ny,nz,mpx,mpy,aglconst)

      implicit none

c     Flag for test mode
      integer      test
      parameter    (test=0)

c     Declaration of subroutine parameters
      integer      nx,ny,nz
      real         x1,y1,p1
      integer      left
      real             x0,y0,p0
      real         reltpos0,reltpos1
      real         deltat
      integer      numit
      integer      jump
      real         wfactor
      integer      fbflag
      real         spt0(nx*ny)   ,spt1(nx*ny)
      real         uut0(nx*ny*nz),uut1(nx*ny*nz)
      real             vvt0(nx*ny*nz),vvt1(nx*ny*nz)
      real         p3d0(nx*ny*nz),p3d1(nx*ny*nz)
      real         xmin,ymin,dx,dy
      integer      per
      integer      hem
      real         mdv
      real         mpx(nx*ny),mpy(nx*ny)
      real         aglconst

c     Auxiliary variables
      real         xmax,ymax
      real             xind,yind,pind

      real             u0,v0,u1,v1,u,v,w,sp
      integer      icount
      character    ch
      real         mpsc_x,mpsc_y

c     Externals    
      real         int_index4
      external     int_index4
      
c     Reset the flag for domain-leaving
      left=0

c     Set the esat-north boundary of the domain
      xmax = xmin+real(nx-1)*dx
      ymax = ymin+real(ny-1)*dy
      
C     Set parcel height to aglconst above topography
      call get_index4 (xind,yind,pind,x1,y1,0.,reltpos0,
     >                 p3d0,p3d1,spt0,spt1,3,
     >                 nx,ny,nz,xmin,ymin,dx,dy,mdv)
      sp = int_index4 (spt0,spt1,nx,ny,1,xind,yind,1.,reltpos0,mdv)
      p0 = sp + aglconst

C     Interpolate wind fields to starting position (x0,y0,p0)
      call get_index4 (xind,yind,pind,x0,y0,p0,reltpos0,
     >                 p3d0,p3d1,spt0,spt1,3,
     >                 nx,ny,nz,xmin,ymin,dx,dy,mdv)
      u0 = int_index4(uut0,uut1,nx,ny,nz,xind,yind,pind,reltpos0,mdv)
      v0 = int_index4(vvt0,vvt1,nx,ny,nz,xind,yind,pind,reltpos0,mdv)

C     For first iteration take ending position equal to starting position
      x1 = x0
      y1 = y0
      p1 = p0
 
C     Iterative calculation of new position
      do icount=1,numit

C        Calculate new winds for advection
         call get_index4 (xind,yind,pind,x1,y1,p1,reltpos1,
     >                    p3d0,p3d1,spt0,spt1,3,
     >                    nx,ny,nz,xmin,ymin,dx,dy,mdv)
         u1 = int_index4(uut0,uut1,nx,ny,nz,xind,yind,pind,reltpos1,mdv)
         v1 = int_index4(vvt0,vvt1,nx,ny,nz,xind,yind,pind,reltpos1,mdv)
 
c        Get the new velocity in between
         u=(u0+u1)/2.
         v=(v0+v1)/2.
        
c        Get the mapping scale factors for this position
         mpsc_x = int_index4 (mpx,mpx,nx,ny,1,xind,yind,1.,reltpos1,mdv)
         mpsc_y = int_index4 (mpy,mpy,nx,ny,1,xind,yind,1.,reltpos1,mdv)

C        Calculate new positions (adapted for cartesian grid)
         x1 = x0 + fbflag * deltat * u * dx/mpsc_x
         y1 = y0 + fbflag * deltat * v * dy/mpsc_y
 
c        Write the update positions for tests
         if ( (icount.eq.3).and.(test.eq.1) ) then
            write(*,'(10f10.2)') x0,u,x1-x0,p0,w,p1-p0
         endif

C       Set trajectory height to aglconst above topography
        call get_index4 (xind,yind,pind,x1,y1,0.,reltpos1,
     >                   p3d0,p3d1,spt0,spt1,3,
     >                   nx,ny,nz,xmin,ymin,dx,dy,mdv)
        sp = int_index4 (spt0,spt1,nx,ny,1,xind,yind,1.,reltpos1,mdv)
        p1 = sp + aglconst

c       Handle trajectories which cross the lower boundary (jump flag)
        if ((jump.eq.1).and.(p1.lt.sp)) then
            print*,'jump'
            p1=sp+10.
        endif

c       Handle periodioc boundaries for 'ideal' mode
        if ( per.eq.1 ) then
                if ( x1.gt.xmax ) x1=x1-xmax
                if ( x1.lt.xmin ) x1=x1+xmax
        endif
 
C       Check if trajectory leaves data domain
        if ( (x1.lt.xmin).or.(x1.gt.xmax).or.
     >       (y1.lt.ymin).or.(y1.gt.ymax).or.(p1.lt.sp) )   ! geopot : .lt. ; pressure: .gt.
     >  then
          left=1
          goto 100
        endif

      enddo

c     Exit point for subroutine
 100  continue

      return

      end
      
c     -------------------------------------------------------------------
c     Iterative Euler time step - isentropic
c     -------------------------------------------------------------------

      subroutine euler_isen
     >          (x1,y1,p1,left,x0,y0,p0,reltpos0,reltpos1,
     >           deltat,numit,jump,mdv,wfactor,fbflag,
     >               spt0,spt1,p3d0,p3d1,uut0,uut1,vvt0,vvt1,
     >           tht0,tht1,sth0,sth1,
     >           xmin,ymin,dx,dy,per,hem,nx,ny,nz,mpx,mpy,isen)

      implicit none

c     Flag for test mode
      integer      test
      parameter    (test=0)

c     Declaration of subroutine parameters
      integer      nx,ny,nz
      real         x1,y1,p1
      integer      left
      real             x0,y0,p0
      real         reltpos0,reltpos1
      real         deltat
      integer      numit
      integer      jump
      real         wfactor
      integer      fbflag
      real         spt0(nx*ny)   ,spt1(nx*ny)
      real         uut0(nx*ny*nz),uut1(nx*ny*nz)
      real             vvt0(nx*ny*nz),vvt1(nx*ny*nz)
      real         tht0(nx*ny*nz),tht1(nx*ny*nz),sth0(nx*ny),sth1(nx*ny)
      real         p3d0(nx*ny*nz),p3d1(nx*ny*nz)
      real         xmin,ymin,dx,dy
      integer      per
      integer      hem
      real         mdv
      real         mpx(nx*ny),mpy(nx*ny)
      real         isen

c     Auxiliary variables
      real         xmax,ymax
      real             xind,yind,pind

      real             u0,v0,u1,v1,u,v,w,sp
      integer      icount
      character    ch
      real         mpsc_x,mpsc_y

c     Externals    
      real         int_index4
      external     int_index4
      
c     Reset the flag for domain-leaving
      left=0

c     Set the esat-north boundary of the domain
      xmax = xmin+real(nx-1)*dx
      ymax = ymin+real(ny-1)*dy

C     Interpolate wind fields to starting position (x0,y0,p0)
      call get_index4 (xind,yind,pind,x0,y0,p0,reltpos0,
     >                 p3d0,p3d1,spt0,spt1,3,
     >                 nx,ny,nz,xmin,ymin,dx,dy,mdv)
      u0 = int_index4(uut0,uut1,nx,ny,nz,xind,yind,pind,reltpos0,mdv)
      v0 = int_index4(vvt0,vvt1,nx,ny,nz,xind,yind,pind,reltpos0,mdv)

C     For first iteration take ending position equal to starting position
      x1 = x0
      y1 = y0
      p1 = p0
 
C     Iterative calculation of new position
      do icount=1,numit

C        Calculate new winds for advection
         call get_index4 (xind,yind,pind,x1,y1,p1,reltpos1,
     >                    p3d0,p3d1,spt0,spt1,3,
     >                    nx,ny,nz,xmin,ymin,dx,dy,mdv)
         u1 = int_index4(uut0,uut1,nx,ny,nz,xind,yind,pind,reltpos1,mdv)
         v1 = int_index4(vvt0,vvt1,nx,ny,nz,xind,yind,pind,reltpos1,mdv)
 
c        Get the new velocity in between
         u=(u0+u1)/2.
         v=(v0+v1)/2.
        
c        Get the mapping scale factors for this position
         mpsc_x = int_index4 (mpx,mpx,nx,ny,1,xind,yind,1.,reltpos1,mdv)
         mpsc_y = int_index4 (mpy,mpy,nx,ny,1,xind,yind,1.,reltpos1,mdv)

C        Calculate new positions (adapted for cartesian grid)
         x1 = x0 + fbflag * deltat * u * dx/mpsc_x
         y1 = y0 + fbflag * deltat * v * dy/mpsc_y
 
c        Write the update positions for tests
         if ( (icount.eq.3).and.(test.eq.1) ) then
            write(*,'(10f10.2)') x0,u,x1-x0,p0,w,p1-p0
         endif

c        Set trajectory height to isentropic level         
         call get_index4 (xind,yind,pind,x1,y1,isen,reltpos1,
     >                    tht0,tht1,sth0,sth1,1,
     >                    nx,ny,nz,xmin,ymin,dx,dy,mdv)
         p1 = int_index4 
     >          (p3d0,p3d1,nx,ny,nz,xind,yind,pind,reltpos1,mdv)

C       Interpolate surface geop.height to actual position
        call get_index4 (xind,yind,pind,x1,y1,0.,reltpos1,
     >                   p3d0,p3d1,spt0,spt1,3,
     >                   nx,ny,nz,xmin,ymin,dx,dy,mdv)
        sp = int_index4 (spt0,spt1,nx,ny,1,xind,yind,1.,reltpos1,mdv)

c       Handle trajectories which cross the lower boundary (jump flag)
        if ((jump.eq.1).and.(p1.lt.sp)) then
            print*,'jump'
            p1=sp+10.
        endif

c       Handle periodioc boundaries for 'ideal' mode
        if ( per.eq.1 ) then
                if ( x1.gt.xmax ) x1=x1-xmax
                if ( x1.lt.xmin ) x1=x1+xmax
        endif
 
C       Check if trajectory leaves data domain
        if ( (x1.lt.xmin).or.(x1.gt.xmax).or.
     >       (y1.lt.ymin).or.(y1.gt.ymax).or.(p1.lt.sp) )   ! geopot : .lt. ; pressure: .gt.
     >  then
          left=1
          goto 100
        endif

      enddo

c     Exit point for subroutine
 100  continue

      return

      end

c     ----------------------------------------------------------------------
c     Get spherical distance between lat/lon points
c     ----------------------------------------------------------------------

      real function sdis(xp,yp,xq,yq,unit)

c     Calculates spherical distance (in km) between two points given
c     by their spherical coordinates (xp,yp) and (xq,yq), respectively.

      real,parameter ::       re=6371.229
      real,parameter ::       rad2deg=180./3.14159265
      real,parameter ::       deg2rad=3.141592654/180.

      real         xp,yp,xq,yq,arg
      character*80 unit
      real         dlon,dlat,alpha,rlat1,ralt2

      if ( unit.eq.'km' ) then

         arg=sin(yp*deg2rad)*sin(yq*deg2rad)+
     >              cos(yp*deg2rad)*cos(yq*deg2rad)*cos((xp-xq)*deg2rad)
         if (arg.lt.-1.) arg=-1.
         if (arg.gt.1.) arg=1.
         sdis=re*acos(arg)

      elseif ( unit.eq.'deg' ) then

         dlon = xp-xq
         if ( dlon.gt. 180. ) dlon = dlon - 360.
         if ( dlon.lt.-180. ) dlon = dlon + 360.
         sdis = sqrt( dlon**2 + (yp-yq)**2 )

      elseif ( unit.eq.'km.haversine' ) then

        dlat   =  (yp - yq)*deg2rad
        dlon   =  (xp - xq)*deg2rad
        rlat1   =  yp*deg2rad
        rlat2   =  yq*deg2rad

        alpha  = ( sin(0.5*dlat)**2 ) +
     >           ( sin(0.5*dlon)**2 )*cos(rlat1)*cos(rlat2)

        sdis = 4. * re * atan2( sqrt(alpha),1. + sqrt( 1. - alpha ) )

      endif

      end